|
| 1 | BOUNDARYFENCING. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 3 | Filling in foundation or plinth by fine sandconsolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. |
| 4 | Single layer brick flat soling of picked jhama bricks including ramming and dressing bed of proper level and filing joints with local sand. |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground flooras per relevant IS codes. (i) Pakur Variety(ii ) River Bazree(iii) RajMahal(iv) With local hard blackstone variety chips (crusher broken) a) in ground floor |
| 6 | Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approvedthickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out aftercompletion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floorheight shall be taken as 4 m and extra for works beyond the initial 4 m ht.shall be allowed under 12 (e) for every 4 m or part thereof) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. a) in ground floor |
| 7 | Reinforcement for reinforced concrete work in sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening andremoval of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16gauge black annealed wire at every intersection, complete as per drawingand direction. (a) For works in foundation and upto roof of ground floor/upto 4 m |
| 8 | Brick work with 1st class bricks in cement mortar (1:6). a) In superstructure, ground floor |
| 9 | 125 mm. thick brick work with 1st class bricks set in cement, sand mortar(1:4) in ground floor including H.B. netting in every alternate layers. |
| 10 | M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding/staging where necessary [Excluding cost of chipping over concrete surface] (Ground floor). i) With 1:4 cement mortar b) 15 mm thick plaster |
| 12 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 13 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC (In Ground Floor) Two Coats |
| 14 | Protective and Decorative Textured exterior high class matt finish paint Resin containing fine crystalline additives derive from Granite as per manufacturer\"s specification and as per direction of EIC to be appliedover acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 15 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary: |
| 17 | ADD for GST @ 18.0% |
| 18 | ADD for CESS @ 1.0% |
