Bids Are Invited For 1 61610506 Austenitic Type (303 Se) Free Machining Non-Magnetic Bright Quality Stainless Steel Hexagonal Bar Conforming To Hal Std1206 / 303 Se, Astm A 582 / Ams 5641 / Ams 5640 Type 2 / Mil-S-7720, 303 Se / Bs 303 S 41, Bs 970 / Aisi

Sharing tender

Bids Are Invited For 1 61610506 AUSTENITIC TYPE (303 SE) FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL HEXAGONAL BAR CONFORMING TO HAL STD1206 / 303 SE, ASTM A 582 / AMS 5641 / AMS 5640 TYPE 2 / MIL-S-7720, 303 SE / BS 303 S 41, BS 970 / AISI 303 SE SIZEA/F 6 MM X 2 TO 3 METERS IN LENGTH. 2 62602204 BRASS ROUND HAL STD 1301,IS 319,TYPE-1 1/2HARD,Dia4MM X 2 TO 3 METERS LENGTH 3 62604754 HALF FINISHED BRASS MATERIAL TUBE Dia4 X 0.5 OF 1000MM HAL STD 1307/IS407-81 GRADE CUZN37 4 62606204 NAVAL BRASS RODS, CONDITIONANNEALED, CONFORMING TO IS 291 1989, GRADE 1, / HAL STD 1302 / BS2824 GRCZ-112, SIZEDia4MM X 2 TO 3 METERS IN LENGTH 5 62612102 COLD ROLLED BRASS SHEET,STRIP& FOIL THCOND HALF HARDCUZN37,IS 410/C27200,ASTM B36/CZ108,BS2870/CU ZN 37,CW508L-EN1652-R350/ TH.0.2 MM, MIN. SIZE350 X 1200 MM. HAL STD1300-HB. IT SHOULD BE PROTECTED WITH PVC COATING MORETHAN 50microON BOTH SIDES 6 62612104 COLD ROLLED BRASS SHEET,STRIP& FOIL THCOND HALF HARDCUZN37,IS 410/C27200,ASTM B36/CZ108,BS2870/CU ZN 37,CW508L-EN1652-R350/ TH.0.4 MM, MIN. SIZE350 X 1200 MM. HAL STD1300-HB. IT SHOULD BE PROTECTED WITH PVC COATING MORETHAN 50microON BOTH SIDES 7 62617204 RIVETTING QUALITY BRASS WIRE CONF.HAL STD 1303,IS 4413-CUZN-37 ANNEALED CONDITION Dia4MM 8 63615303 BARE COPPER WIRE, CONDITION ANNEALED, CONFORMING TO HAL STD6054 GRADE B / IS 8130 / BS 128 / ASTM B-3, SIZEDia0.5 MM IN SPOOLS 9 64617110 ALLUMINIUM ALLOY SHEET,HAL STD 1252-1/2H, CONFIRMING TO ISGR 31000(NS3) IS 737 EN573-3-3003 OR 3013, DH BS1470 - 3103 H-14 (NS-3) - 1/2H (H4), SIZEthickness 1.0 X 1000 X 2000 MM WITH PVC COATING ON BOTH SIDES. 10 64621013 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250 TH.thickness 12 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250 11 64621014 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH.thickness 14 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 12 64621025 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH.thickness 16 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 13 64621120 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400- 2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH.thickness 2.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50microON BOTH SIDES. 14 64621160 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH.thickness 6.0 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 15 64655128 ONE SIDE/TWO SIDES POLISHED(RA 0.2 micro M) NON-FADING BLACK ELECTRO COLOURED ANODIZED ( AS PER MIL-A-8625, TYPE II, CLASS 2 ) SHEET ALUMINIUM SPECIFICATIONHAL-1255 CONDITION3/4 HARD OR IS737-19000- H6 SIZE thickness0.5 MM X 300MM X 300MM 16 65116206 PTFE/TEFLON ROUND CONFORMING TO HAL STD 6251 MIL-P-19468A OR ASTM-D-1710, GRADE-II,TYPE -3, CLASS-D Dia 6 MM X 500 MM IN LENGTH 17 65125039 NYLON ROUND TYPE -66. Dia12 MM.HAL STD 1851 18 65125148 GLASS EPOXY LAMINATED SHEET, CONFORMING TO HAL STD1807, NEMALI -1- 98, GRFR4 / BSEN 60893 - 3- 2 EPGC 202 / BS 3953 TYPE EP4 / MIL - 1 - 24768 / 27 TYPE GEE - F(FR4) SIZEthickness1.5 MM X 1220 MM X 1220 MM. 19 65125285 COPPER CLADED GLASS EPOXY LAMINATES CONF. TO IPC-4101 B/26 WITH TG Greater than or equal to 170 DEGREE C WITH 1 OZ COPPER ON BOTH SIDES SIZEthickness 1.6MM X 36 inch X 48 inch 20 65125396 NYLON SHEET CONFORMING TO HAL STD1853, MIL-P-20693 A, TYPE-I, SIZE thickness6 X 1000 X 1000 MM 21 65131105 GLASS EPOXY LAMINATE SHEET CONFORMING TO HAL STD1807 BS 3953- 1990 GRADEEP3 (OR) EP4 (OR) BSEN 60893-3-2 EPGC 202 SIZEthickness0.5 X 1000 X 1000 MM. Total Quantity : 2323