Tender For Installation Of Highmast Light In Various Place In Rampur - Supply & Fixing Of 16 Mtr 80, Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Out Side Dip,Heaving Pole Sheet Thickness 3 Mm. Top Dia Minium 150 Mm, Bottom D, rampur-Uttar Pradesh

Tender For Installation Of Highmast Light In Various Place In Rampur - Supply & fixing of 16 mtr 80, mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mmbase plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 2 Supply and fixing of factory wired integral LED flood light luminaire die cast aluminium housing with toughed glass/UV stabilized PC cover and lenses built with mandatory driver set suitable for 170 watt to 200 watt confirming to IP 66 and IK 07 and above protection complete in all respected. 20400-24000 system lumen high power LED with lenses,>120 Lm/W, pf>0.95, THD<10% at full load, CRI>70 potted drive set in metal housing (Not circuitory), phase to phase protection at 440V, & >300V auto cut and restart feature, 4 KV internal surge protection,with 05 year warranty.CAT-AAA 3 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top as directed by the Engineer- In charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16sqmm 04 core 4 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 5 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.25Ampere TPN Panel 6 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.25Ampere TPN Panel 7 Supply & fixing danger board fabricated from 10 guage M.S. Sheet as per I.E. Rules (PWD-1109/165).

INR 2354 /-

INR 53448.0 /-

INR 26.72 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB