Tender For Addition / Alteration To Bldg No T-38 At Thi Road Under Ge Deolali; 1 Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in Hard / densesoil all as directed. 2 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed. 3 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointall as directed. 4 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. 5 M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed. 6 Anti-termite treatment the top surface of filled earth at therate of 5 lit of emultion per sqm of surface area. 7 Anti-termite treatment the soil under plinth protection at theat therate of 5 lit of emultion per sqm of surface area. 8 M & L for providing reinforced cement concrete M-25, using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed. 9 M & L for providing reinforced cement concrete M-25, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. 10 M & L for providing reinforced cement concrete M-25, using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. 11 M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. 12 M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. 13 M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. 14 M&L TMTbars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. 15 Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed. 16 M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed. 17 M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete etc complete all as specified and directed. 18 Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed 19 Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. 20 M&L Flyash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. 21 M&L for Rendering in 10 mm thick plastering 1:6on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth (without using extra lime or cement)complete all as specifed and directed. 22 M&L for Rendering 15mm thick in cement morter 1:4 on fair faces of brick work/concrete surfaces including neeru finish to plastering as specified. 23 M&L for applying one coat of alkali resistant primer etc complete all as directed. 24 M&L for applying two coats of oil emulsion distemper on wall etc complete all as directed. 25 M&L for applying 2mm thick wall care putty External/Internal on wall all as specified and directed. 26 M&L fortwo Coat exterior weather coat (Apex paint or Eqivalent) over one coat of exterior primer, including properly making of V shape crakes and filling of all cracks with crakes seal inc. preparation of surface of old decorated wall etc complete all as directed. Make Asian Apex Ulltima or equivalent. 27 M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm oversurfacesall as specified and directed by Engr-incharge 28 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 29 M&L joint free non - skid Ceramic tiles 7 to 8 mm thick (Coloured) (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. 30 M&L for Glazed ceramic tilesof size600mm x 300mm x 7 to 8mm thick (coloured) of superior quality with highligter tilesfixed on vertical surfaces such asskirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4)and pointed in coloured cement to match complete all as specified and directed. 31 M&L for Double charged Vitrified tiles 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 32 Ditto all as item No. 4 but in skirting over 8 to 10mm thickbacking coat in CM 1:4complete all as specified and directed. 33 Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed. 34 M & L for 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified. 35 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 36 S&F vitreous china single piece EWC of Size: 360x640x685 mm, Single Piece WC with PP soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, S Trap - 220 mm / P Trap-180 mm complete all as specified and directed.Make Jaquar cat part No SLS-WHT-6851S220PP or SLS-WHT-6851P180PP or equivalent in kohlar, grohe and Roca 37 S&F vitreous china Wash Basin counter Top600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specifiedand directed by Engr-in-ChargeMake : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca 38 S&F decorative typeWHB Vanity floor mounted made out ofcoloured PVC board of PVC/HDHMR, wash basin, side cabinet with mirror complete all specified and approved by GE Make:Cat part No. Amara of Parrywareor Equivalent in Hindware/Somany/Cera 39 S&F stainless steel chromium plated anticockroach grating jali 600x100 mm fixed complete all as spcified and directed by Engr-in-charge Make Somanycat part No 272150050691 OR EQVL INJaquar Kohlar, Roca/Grohe 40 S&F stainless steel chromium platedtowel ringcomplete all as specified and directed Make Jaquar cat part No vgs-ACN1121BN OR EQVL IN Kohlar, Roca/Grohe 41 S&F stainless steel chromium plated SOAP dispenser with glass bottlecomplete all as specified and directed Make Jaquar cat part No vgs-ACN1135N OR EQVL IN Kohlar, Roca/Grohe 42 S & F for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12or equivalent in kohlar, grohe and Roca 43 S&F Maze Overhead Shower 200X200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System, fixing to steel pipe or union complete all as specified Make Jaguar (Cat part No : OHS-1619or equivalent in kohlar, grohe and Roca 44 S & F 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part NoFLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca 45 S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. 46 S&FHealth Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca 47 S&F 15mm dia brass chromium plated Pillar Cock with Extension Body single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5021M or equivalent in kohlar, grohe and Roca 48 S&F 15mm dia brass chromium plated two waybib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No.: OPP-15041PM or equivalent in kohlar, grohe and Roca. 49 S&F mirrorsbevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed. 50 Dismantling of water tanks (RCC Tank/PVC Tank)including disconnecting all connections etc Any capacity. complete all a specified. 51 S&F rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks complete all as specified. 52 Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 53 Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 54 Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. 55 S&F 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. 56 Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed. 57 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. 58 S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. 59 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 60 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 61 S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. 62 S&F LDPE pipe 40mmbore fixed to wall/ceiling with bends/elbow complete all as specified. 63 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and directed. 64 Returning, filling in soft/loose/hard/dense soil including spreading, levelling, watering & well ramming in layers n.exc 25cm complete all as specified and directed. 65 Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. 66 M&L for 150mm bore Reinforced concrete pipes single socketed, class NP-2, laid and jointed, complete all as specified and as directed. 67 M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm & bore pipe, complete all as specified and as directed. 68 M&LPre-cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in manhole cover/slabs and placing in position including necessary form work in CM 1:6 complete all as specified and directed. 69 S&F for mild steel TMT bars 10mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and as directed. 70 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. 71 S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 72 S & F bombay sliding powder coated aluminiumthree track sliding windows, including fabrication of frame size 94mmx 34mmx1.50mm andthree track shutters frame size 40mmx 18mmx18mm( two glass shutters of 2mm and one wiremesh shutter) and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i)the quoted rate shall be inclusive of cost of 4mm thick Glass panes and steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm. (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India 73 Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc completeall as directed. 74 S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. 75 M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 76 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. 77 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan. 78 S&F 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified 79 S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texturewith density not less than 650 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified and directed. 80 S&F 28-30 mm thick Prelaminated WPC factory made 100%Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and including Extruded board CNC machine cut jali shutter inserted in between sketonandwith density not less than 650 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified 81 S&F 100 mm long Butt hinges, Stainless Steel, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed. 82 S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed. 83 S&F 150 mm long Extruded Stainless Steel handles designer type, fabricated type polished complete all as specified and as directed. 84 S&F 150mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. 85 M&L for 250mm longStainless Steel, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed complete all as specified and as directed. 86 Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. 87 S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel pattern sheet 0.47mm to 0.50mm thick of an colour having tensile strength of 550Mpa and AZ-150 as in roof covering in hexagonal/rectangular/pentagonal shape cladding to wall fixed with self tapping screws as specified. Make: JSW Colouron+ or Equivalent TATA 88 S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47mm to 0.50mm thick of anycolour having tensile strength of 550Mpa and AZ-150 as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. JSW Colouron+ or Equivalent in TATA 89 M&L in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. 90 M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 91 M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using(40 mm graded stone aggregate ) as in Plinth protection. 92 M&L for Providing, cement concrete type B1 1:2:4 using (20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses,parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all complete all as specified and directed 93 M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincl screed bed 15mm thick in CM 1:6 complete all as specified and directed. 94 S&Fin repair 12 mm thick toughned glass ( tinted/plain/froasted/film) with openable door of approved design including all fittings such as Bottom patch 163x50x31mm , withTop patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, Double action floor spring, Pivotfor top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, H type handle 450 mm long and double action floor spring hydraulically regulatedheavy duty floor door closer of 10 year warranty complete all as specified and directed Note: All fittings should bestainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint gobin or equivalent, make of fittings: hafele, hettich or equivalent. 95 S&F in repairs Toughned glass (10mm in thickness) fixed doors, partitions, windowsand similar work including cutting to shape, drilling holes required and fixing the glass on said location with all necessary ss joining cleats and as specified 96 S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed. 97 S&F 18mm Thick Plywood, grade BWR, type BB, No. of ply 13,fixed with screws complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge. Make:- Caliber/GreenPly/Century or Equivalent 98 S& F 1mm thick sunmica coloured/design/texureof decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions and directed by Engr-in-Charge. 99 Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc complete all as directed. 100 M & L for roof tile Mangalorepattern inter locking at side joints,laid dry complete all as specified and directed. 101 Dismantaling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed. 102 M&L for providing & fixing in repair false ceiling ofDesigner tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos T of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main T at 600 mm c/c toform a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent 103 M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLSH, PVC insulated sheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of G I modular typeterminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters in and including cover plateetc.fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:- (a) One light point controlled by one switch 104 (b) One fan pointcontrolled by one switch 105 (c) One 5 pin, 6 A socket outlet on the same board 106 (d) One 5 pin, 6 A socket outlet on the independent board. 107 All as per item No 111 here-in-before but with two 2.5 sqmm size cables as phase and neutraland one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto- 108 Modular type switch, 1 way,6 Amps, 1 module 109 Modular type socket, 2 & 3 pin combined, 6 Amps, 2 module 110 Modular type switch, 1 way, 16 Amps, 1 module 111 Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module 112 S&F wall mounted LED Light fittings, 2 feet long, 10 W, polycarboate housing and integrated electronic driver complete all as specified and as directed. 113 S& F Ceiling mounted round shape 12 W LED luminaire Recessed type low height back lit down lighter aluminioum housing long life .Make of Crompton model PROXIMA -R 12 W LED 3000 K or equivalent to Philips/ Havells 114 Supply, installing, connecting, testing and commissioning of electric water Heaterstorage type capacity 25 Liters 5 star rated withprecaliberated thermostat, safety valve, preset thermal cut out, fire retardant power cord, ABS outer body, colour changing indicator, copper heating element with rated voltage 2 KW, 230 volt, 50 Hz of temperature range 35 to 75 degree Celsius, horizontal or vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with water and electric connections including hot and cold connection pipes complete all as specified and as directed .. 115 S&F Exhaust fan plastic body 200 mm sweep , single phase 230 volts with all accessories including frame work in ply wood/ metal in existing window / wall and necessary electric connection all as specified and directed Make;- Havells /Bajaj/ CG/Usha 116 Supply and fix MCB protected DB box suitable for Geyser connection all as per directed by Engineer in charge. Make Havells/ Legrand/ 117 Supply and fix in repair MCB SP 5 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed.Make : L&T BB10320B or equivalent inLegrand/Siemens 118 Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .Make : L&TBB4060B or equivalent inLegrand/Siemens 119 Suuply and fix in repair new sheet metal enclosure for DBS when MCBs to e used Triple pole and neutral 4 way double door complete all as specified and directed. 120 Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts 121 M & Lin repair for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. 122 S&F in repair ceiling mounted 2x2 LED luminaire Pluto neo panel with glare free soft light 36 Watt complete pre-wired all as specified anddirected.Make: Halonix/ Havells /Bajaj/ Crompton/ Philips 123 S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model-Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj 124 M & L of sub main wiring with 2 single core, 4 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete in PVC Conduit of suitable size and ISI Markedall as specified and directedby Engineer in charge. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) Proper colour coding of cable should be maintained during execution .Red,Yellow,Blue for phase and black for Neutral and Green for Earth wire 125 Ditto all as per item No - 124 above but with 4 runs of 6 Sqmm cable with two runs of 6 Sqmm cable for earthing. 126 Supply and fix wall fan 450 mm dia, double bearing with clamp and necessary electric connections all as specified and directed Make - Havells /Crompton/Orient 127 S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 30 W LED,complete pre-wired, incl suitable bracketfor fixing light on wall or any indicated locaction all as specified and as directed. Make: Havells (Cat No:ENDURAPEARLSL30WLED757SASYTOPCMP or equivalent in Bajaj/ Wipro/ Philips) 128 Material and laying for Tubes medium grade, galvanised, with all fittings laid in trenches of size 25 mm outer dia complete all as specified and directed. 129 Material and laying for Tubes medium grade, galvanised, with all fittings laid in walls /ceilings/ floors etc ofsize 25 mm outer dia complete all as specified and directed. 130 Supply and fixing gun metal Gate valve 25 mm dia complete all as specified and directed. 131 Cutting of existing GI tubing of 50/ 40mm dia and insertion of Tee for taping of GI pipe 25 mm dia all as specified and directed by Engineer in charge.
