Providing Walking Track, Children Play Items And Avenue Plantation In Shivalayam Street West Side Park At Hb Colony, Bhavanipuram In 42Nd Division In Circle - I Area.(General Funds) Rc.E3 Pdiii Parks-109046/2025 2Nd Call-Engaging 110 hp / Hydraulic Excavator Excavator for removing of high berms,waste materials ,tree trunks,sectioning ,lifting material including cost and conveyance of material as directed by the departmental authorities. Engaging tractor for removing of waste materials ,tree trunks,lifting material including cost and conveyance of material as directed by the departmental authorities Providing Gravel spreading in layers not more than 150 mm thick, sectioning to required camber and gradient, watering and compacting each layer to protors density with OMC compaction using 80 to 100 KN capacity vibratory roller including cost and conveyance of all materials, water etc., to site, hire and operational charges of power roller and other T&P etc., complete duly maintaining the required camber and gradient in the formation as directed by Engineer-in charge Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308) Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete. Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 40mm,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH For Culvert Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete .- Plinth Beam Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 40mm,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH Manufacturing, Supply, Delivery and fixing of M.S. pipe using with M.S. plates including cost and conveyance of all materials and labour charges for cutting, welding, grinding etc., , complete.as directed by the departmental authorities. Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities. Supply and fixing of C.C. Kerb not less than M35 strength of size 600 X 450 X 110 mm thick with bottom thickness of 110 mm upto height of 300 mm and top width of 50 mm thick chamfering with 45° at starts at 300 mm height to 375 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work. Filling with gravel & sand mix of 70% and 30% respectively including cost and conveyance, spreading, sectioning etc., consolidation with mechanical plate vibrated / mini hand driven power roller. Brick masonry work in cement mortar complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 MORD / 1300 MORTH with Second Class Bricks & Moulded BricksBrick masonry in 1:6 Cement mortar Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. Collection and Supply of Sand for filling including Cost and coneyance, Spreading, Sectioning etc., complete. Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS(two coat) Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Supply and delivery of RCC design benches with length 1.5 mts, width 0.45 mts, heigth 0.60 mts with arms and back rest including cost of bench, making charges, unloading and unloading charges, transportation to the site etc as directed by the departmental authorities. Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7 x 8 of plant height not less than 1.0 feet,8 x 10 of plant height not less than 3.0 feet,13 x 13 of Tree/Palm height not less than 5 feet,13 x 13 of plant (Hedges & Shrub) height not less than 2 feet,15 x 16 of plant (Tree/Palm/Topiary) height not less than 5 feet, 18 x 18 plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75 and above, 21 x 21 and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1 and above. Heights mentioned above are excluding bag height.All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. The rates inclusive of loading, transportation to the site, unloading & handling. lawn Tabebia Rosea 21x21 Lagerstromia 18x18 Bauhinia Blackena 21x21 Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4 thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral) Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral) Collection and Supply of Red Earth including excavation, Cost and conveyance, Spreading, Sectioning etc., complete. Supply, delivery and Commissioning of the following children play equipment of standard brands customized / standard option as preferred by the department including cost and conveyance of materials to site area proposed for installation and commission as per the model image furnished herewith and as directed by the departmental authorities. Cresent Slide :Main pipe made from 90 NB Mild Iron with heavy quality of pipes and standing flat form support pipes are made from 42 NB and 32 NB supports Mild Iron with heavy quality of pipes. Ladder steps and support pipes heavy Mild Iron, Crescent slide are made from heavy FRP of 6mm thickness. Net Rock climber :Mode of frame 50 NB ‘C’ class GI pipes CNC bend of Tata / Jindal make; Rope climber with 18mm OD nylon rope and hinged to main frame with 8mm U hook, Rock climber with high quality LLDPE material and aligned to Zigzag shaped protection to facilitate climbing act; with powder coated multi colored painting 60 to 70 microns; all the materials confirming to IS codes. Double Sea saw with 4 seated ; 8 feet length and 4 feet width 1 – 6” height mounted on central frame structure of 80NB ‘C’ class GI Pipes of Tata / Jindal make and with proper hinges, holders. Bolts and nuts, powder coated multi color painting to 60 to 70 microns and seat of high quality LLDPE materials – all materials confirming to IS codes. Double Arch SwingDouble Arch swing of 6.50m x 1.50m size four seated with 6m long 80NB GI Pipe bent in single piece and welded together with a flange 5mm their of IS 40x40x5mm to form a strong frame bottom and middle height of the frame in 2700mm; top pipe 50NB GI pipe 2950mm length; swing clamp assembly made up of two parts are joined together with M6 allen bolts along with ‘S’ hook to house a bearing for smooth and noiselen swing; rubber dip molded 6 mm dia 1450mm along swing chain; ‘S’ hook of 8mm dia 145 x 130mm triangular hook of SS 304 grade; seats made of LLDPE; self lubricated SKF/ NTN/ NACHI make bearings; pins and clips of 12mm dia – all framing pipes of ‘C’ class GI pipe of Tata / jindal make and powder coated multicolor optional painting of 50-70 micros and all materials shall confirming to IS codes. Circular Swing: Length x Width x Height = 6ft x 3ft x 8ft. Combination equipment madeup of GI pipe of different NB. NB Stands for Nominal Boresize i.e., Internal diameter of pipe in millimeters. Bearings are reputed make and press fitted for smooth rotation. Welding: MIG weld copper wire 1.2 mm is used. Paint: Power Coat Para Coating Paints. Bush and Pin Rods are Heavy Quality of Galvanized iron. Steel Caps for side and top and bearnings covers for safety of water damage, heavy quality aluminium foot rest. All caps and steel and other bolts and nuts are GI heavy bolts and Nuts 6 Seater Merry Go Round made of GI frame of ‘C’ class Tata / Jindal make vertical pipe of 80NB; and framing pipes of 32mm NB & 50mm with LDPE seating base 6 feet dia and powder coated multicolor optional painting of 50-70 microns and all materials shall confirming to IS codes. Multi children play setMulti play stations consisting of Spiral & Wave Slider & staircase House canopy, railings, platform; made of LLDPE materials fabricated with structural paint of 2.30m to 2.90m height; 114 mm OD ‘C’ class GI Pipe; 1.16 x 1.16 deck 1.00 x 0.66m stair case; hand rails and frames of 32 ODI GI pipes; Roof canopy of 1.47 x 1.47 x 0.96m; wary frames with powder coated paint; all materials shall be confirming to IS codes. Orbital climber: Circular clumber mounted on 4 no.s vertical posts, central supports clumber on two faces made of ‘C’ class Tata / Jindal make GI pipes 80mm dia for vertical and 50 – 32 dia pipe for frames with 8 feet x 6 feet x 7 feet; powder coated multicolor paintings, all materials shall confirming to IS codes. Dome climber: Arch shaped tubes of 8 feet x 8 feet x 6 feet GI pipes of 60 OD; and 32 OD ladder stops all pipes of ‘C’ class Tata / Jindal make powder coated multicolor painting all materials shall confirming to IS codes.
