Tender For Regarding Determining Unit Rate Of Different Types Of Polls And Hymast Work - S/F of 7mtrOctagonal Pole with LED Fitting 2 Supply & fixing of 7 mtr. Gl Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1. Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. as per U.P.P.W.D. S.I. No. 641 (2018) 3 Supply and fixing of 16sq.mm × 4core brass, nickle plated. compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. as per UPPWD SI No. 503 (i). 4 Supply and fixing of 16sq.mm plain or pin type copper tin plated cable socket (lug) to the cableleads, insulating with tape and making connection etc. complete in all respect as per UPPWD SOR No. 504 (d). 5 Supply & laying of 16sq.mm × 4 core aluminium construe PVC insulated armoured serve sheathed cable 1100 Volts grade at a depth off 750mm below ground level over o ccushion of 75mm. Thick scond all around and protected with burnt bricks on side and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the earth conductor by clamps etc. UPPWD SOR No. 501 (i). 6 HDPE Pipes PE - 80 PN-10 DN 90 7 Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driverset suitablefor 70Watt. Confirmingto IP 66 and above Protection complete in all respect as- per PWD sch. Of 2018 S.I.No. 1422. CAT-AAA 8 Supply & Fixing of 2.5mm weather proof wire for LED Light Fitting connection. complete in all 9 Supply and fixing of 6 AMP to 32AMP SPMCB (10KA) C Curve. UPPWD CAT-A (1002) 10 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Including GI Wire connecting pole to pole. 11 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 12 Supply & Fixing ofpole calmps used for main swicth with nut bolt etc. complete in all respect. 13 S/F of 8mtr Octagonal Pole with LED Fitting 14 Supply & fixing of 8mtr. Gl Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1. Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. as per U.P.P.W.D. S.I. No. 641 (2018) 15 Supply and fixing of 16sq.mm × 4core brass, nickle plated. compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. as per UPPWD SI No. 503 (i). 16 Supply and fixing of 16sq.mm plain or pin type copper tin plated cable socket (lug) to the cableleads, insulating with tape and making connection etc. complete in all respect as per UPPWD SOR No. 504 (d). 17 Supply & laying of 16sq.mm × 4 core aluminium construe PVC insulated armoured serve sheathed cable 1100 Volts grade at a depth off 750mm below ground level over o ccushion of 75mm. Thick scond all around and protected with burnt bricks on side and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the earth conductor by clamps etc. UPPWD SOR No. 501 (i). 18 HDPE Pipes PE - 80 PN-10 DN 90 19 Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driverset suitablefor 90Watt. Confirmingto IP 66 and above Protection complete in all respect as- per PWD sch. Of 2018 S.I.No. 1422. CAT-AAA 20 Supply & Fixing of 2.5mm weather proof wire for LED Light Fitting connection. complete in all 21 Supply and fixing of 6 AMP to 32AMP SPMCB (10KA) C Curve. UPPWD CAT-A (1002) 22 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Including GI Wire connecting pole to pole. 23 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 24 Supply & Fixing ofpole calmps used for main swicth with nut bolt etc. complete in all respect. 25 S/F of 9mtrOctagonal Pole with LED Fitting 26 Supply & fixing of 9 mtr. Gl Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1. Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. as per U.P.P.W.D. S.I. No. 645 (2018) 27 Supply and fixing of 25sq.mm × 4core brass, nickle plated. compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. as per UPPWD SI No. 503 (J). 28 Supply and fixing of 25sq.mm plain or pin type copper tin plated cable socket (lug) to the cableleads, insulating with tape and making connection etc. complete in all respect as per UPPWD SOR No. 504 (e). 29 Supply & laying of 25sq.mm × 4 core aluminium construe PVC insulated armoured serve sheathed cable 1100 Volts grade at a depth off 750mm below ground level over o ccushion of 75mm. Thick scond all around and protected with burnt bricks on side and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the earth conductor by clamps etc. UPPWD SOR No. 501 (j). 30 HDPE Pipes PE - 80 PN-10 DN 90 31 Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driverset suitablefor 110Watt. Confirmingto IP 66 and above Protection complete in all respect as- per PWD sch. Of 2018 S.I.No. 1424. CAT-AAA 32 Supply & Fixing of 2.5mm weather proof wire for LED Light Fitting connection. complete in all 33 Supply and fixing of 6 AMP to 32AMP SPMCB (10KA) C Curve. UPPWD CAT-A (1002) 34 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Including GI Wire connecting pole to pole. 35 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 36 Supply & Fixing ofpole calmps used for main swicth with nut bolt etc. complete in all respect. 37 S/F of 10mtrOctagonal Pole with LED Fitting 38 Supply & fixing of 10 mtr. Gl Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1. Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. as per U.P.P.W.D. S.I. No. 649 (2018) 39 Supply and fixing of 25sq.mm × 4core brass, nickle plated. compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. as per UPPWD SI No. 503 (J). 40 Supply and fixing of 25sq.mm plain or pin type copper tin plated cable socket (lug) to the cableleads, insulating with tape and making connection etc. complete in all respect as per UPPWD SOR No. 504 (e). 41 Supply & laying of 25sq.mm × 4 core aluminium construe PVC insulated armoured serve sheathed cable 1100 Volts grade at a depth off 750mm below ground level over o ccushion of 75mm. Thick scond all around and protected with burnt bricks on side and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the earth conductor by clamps etc. UPPWD SOR No. 501 (j). 42 HDPE Pipes PE - 80 PN-10 DN 90 43 Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driverset suitablefor 110Watt. Confirmingto IP 66 and above Protection complete in all respect as- per PWD sch. Of 2018 S.I.No. 1424. CAT-AAA 44 Supply & Fixing of 2.5mm weather proof wire for LED Light Fitting connection. complete in all 45 Supply and fixing of 6 AMP to 32AMP SPMCB (10KA) C Curve. UPPWD CAT-A (1002) 46 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Including GI Wire connecting pole to pole. 47 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 48 Supply & Fixing of pole calmps used for main swicth with nut bolt etc. complete in all respect as per sanctioned tender rate. 49 S/F of 9mtr ST Pole with LED Fitting 50 Supply & fixing steel tubular pole 9 Metre long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. As per PWD SOR No. 613 51 Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driverset suitablefor 70 Watt. Confirmingto IP 66 and above Protection complete in all. 52 Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driverset suitablefor 90 Watt. Confirmingto IP 66 and above Protection complete in all. 53 S/F of round pole calmps of 50mm x6mm flat Iron on pole with nut bolt etc. complete in all respect 54 S/F of 1.25 x 1.5mtr long GI Bend for LED fittingon pole. complete in all 55 S/F of 2.5mm weatheproof wire for LED Fitting Conection. complete in all. 56 Supply & Fixing of 7×16mm wire/cable complete in all. 57 Supply & erection of D clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint as per tender & UPPWD Labour rate. 58 Supply & Laying of 75 mm x 90 mm shackle insulator/100 mm x 65 mm pin insulator including G.I. Bolts /spindle nuts etc. complete in all respect. as per tender & UPPWD Labour rate. 59 Supply & Laying of 16sqmm × 4core aluminum construe PVC insulated armoured serve sheathed cable 1100 Volts. 60 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 61 Supply & Fixing ofround pole calmps used for main swicth with nut bolt etc. complete in all. 62 S/F of 9mtr long highmastwith LED flood light fitting 63 S/F of steel Tubular pole 9.5mtr long designed 410 SP 36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect as per U.P.P.W.D. S.I. No. 613, 2018 and directed by Etc. 64 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. As e tender rate & labour rate Uppwd S.No. 1454 65 Supply of 50x6 m-m- Falatangle iron fabricatedFramefor Fixing of Fitting size on Pole 1.25 Mt. Diaa complet with nut Boltas per market GST Extra. 66 Supply and laying of 16sq.mm 4core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in allrespect. As e tender rate & labour rate Uppwd S.No. 1454 67 Supply & erection of D clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . complete in allrespect. 68 Supply & fixing of 75 mm x 90 mm shackle insulator /100 mm x 65 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. complete in allrespect. 69 Supply and fixing of1KW Autometic Street Light Timer mainswitch complete in all word. 70 Supply & Fixing of 1.5mm copper wire for LED Light Fitting connection. complete in all. 71 Supply & Fixing ofround pole calmps used for main swicth with nut bolt etc. complete in all 72 S/F of 7mtr Decorative Pole & Decorative light. 73 Supply & fixing of 5.5Mtr Pole With Cast Aluminium Base & Galvanized Mild Steel Bottom Profile Dia 270 mm Decorative Embellishment Paint In Goldn Color Middle Profile Dia 114mm & Top Profile Dia 100 mm Suitable For Single Arm corative Bracket For Drop Dowrlanterm. 74 S/F of pole Base piller 2mt long 25 x 25cm piller with 4 nos 2mt long 12mm sariya with 3 long thread with 4sute nut complete covered by 2 sute 6nos ring eith 1:3:6 cement concrete foundation including excavtion back filling etc. with 2 nos base plate 0.5 thik 9x9 long with 4 nos hole 4 sute and 1 Nos hole catting 75mm and bailding crass plate and 4x4x6 deep juction box for fixing MCB with cover 75 Supply & Fixing of 1500mm single Arm Bracket (900mm over hang single side). Bracket is provided for suspension of decorative fixture. Bracket is made of mild steel pipe with decorative embellishment. 76 S/F 6Mtr. Pole with cast aluminium base & galvanized embellishment. Embellishment paint in Golden Colour mild steel Bottom profile Dia 270mm with decorative Suitable for double arm decorative bracket for drop down antern. A service window is provided at the bottom Middle profile Dia 114mm & Top Profile Dia 100mm. section with 4way connector & MCB for loop in loop out arrangement. Pole is primer coated & PU painted including foundation bolt with base plate. 77 S/F of 2000mm Double Arm Bracket (900mm over hang bothside). Bracket is provided for suspension of decorative fixture. Bracket is made of mild steel pipe with decorative embellishment. 78 Supply & Fixing of Ornamental decorative with single crown 150 Watt LED Drop Down luminaire made of aluminium housing duly powder coated/PU Painted with PC/PMMA Clear/Frosted diffuser for high illuminance/glare free lighting. MCPCB having high Lumen having high Lumen LEDs are mounted on aluminium heat sinks. 79 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (J) 25sq.mm 4 core 80 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. framewith hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Including GI Wire connecting pole to pole. 81 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 82 Supply and Wiring of copper wire 3core cable for LED connection complete in all work. 83 Supply and fixing of brass nickel plated compression gland for PVC insulated &armoured served sheathed, underground cable including rubber ring etc. complete in all respect. (i) 25sq.mm 4core 84 Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect. (J) 25sq.mm 4core 85 HDPE Pipes PE - 80 PN-10 DN 90 86 Laying and Jointing PVC Pipe. Heading 87 7Mtr Pole With Cast Auminium Base& Galvanized Mild Steel Bottom Profile Dia 270 mm Decorative Embellishment Paint in Goldn Color Middle Profile Dia 114 mm & Top Profile Dia 100 mm Suitable For Single Arm corative Bracket For Drop Dowrianterm. A Service Window Is Provided At The Bottom Section With 4 Way Connector & MCB For Loop in Loop Out Arrangement Pale is Primer Coated & PU Painted And R.CC Foundation Complete In All 88 Supply & Fixing of 2000 mm Single Arm Bracket (900 mm Over Hang Bothside) Bracket is Provide For Suspension Of Decorative Fixture, Bracket Is Made Of Mild Steel Pipe Decorative Embellishment. 89 Supply & Fixing of Ornamental decorative with single crown 150 Watt LED Drop Down luminaire made of aluminium housing duly powder coated/PU Painted with PC/PMMA Clear/Frosted diffuser for high illuminance/glare free lighting. MCPCB having high Lumen having high Lumen LEDs are mounted on aluminium heat sinks. 90 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (J) 25sq.mm 4 core 91 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. framewith hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Including GI Wire connecting pole to pole. 92 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 93 Supply and Wiring of leed copper wire 3core cable for LED connection complete in all work. 94 Supply and fixing of brass nickel plated compression gland for PVC insulated &armoured served sheathed, underground cable including rubber ring etc. complete in all respect. (i) 25sq.mm 4core 95 Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect. (J) 25sq.mm 4core 96 HDPE Pipes PE - 80 PN-10 DN 90 97 S/F of 16mtr Hymast light 98 Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, Lugs, Connertor, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 99 Supply and fixing of twin unit aviation obstruction light (GFC-ZH 750) / Bajaj BJAOL-1 with transformer and neon spiral etc complete in all respects, at the top of the building complete in all respect Cat AA 100 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66/67. protection complete in all respect. 101 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 102 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 103 S/F of 5 core × 3.5sqmm copper conductor cable 104 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 16sq.mm 4core 105 Supply and laying of 25mm × 3mm GI strip from carth electrode directly in the ground as required complete in all respect. 106 S/F of 20mtr Hymast light 107 Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving, pole sheet. thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, lugs, connector, including making suitable foundation. as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 108 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66/67. protection complete in all respect. 109 S/F of 5core × 3.5sqmm copper conductor cable complate in all 110 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16sq.mm 4core. 111 Supply and fixing of5KW Autometic Street Light Timer mainswitch complete in all word. 112 Supply and burring of Safe Earthing Electrode T-39 (Hot- Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dla 12 mm, outer Gl pipe of 16 SWG and inner Gl pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soll (BFC) capable of reducing the soll resistivity with good mixture of retaining capacity along with 30cm square C.l. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 Gl. Strip will be extra) Make: As approved In U.P. P.W.D., & C.P.R.I. Certified. 113 Supply and lay of 25mm×3mm G.I. strip from earth electrod directory in the ground ass required complete in all respect. 114 Supply and fixing ofsinle unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all recpect. 115 S/F of 12.5mtr Hymast light 116 Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & Its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch,including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. Including lugs, connector. 117 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66/67. protection complete in all respect. 118 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 119 Supply & laying of 25mm 3mm G.I. Strip from earth electrod directory in the ground ass required complete in all. 120 Supply & laying aluminium construe PVC insulated armoured serve sheathed cable 1100 Volts grade at a depth off 750mm below ground level over o ccushion of 75mm. Thick scond all around and protected with burnt bricks on side and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the earth conductor by clamps etc. 16sqmm 4core. 121 Supply and fixing of2KW Autometic Street Light Timer mainswitch complete in all word. 122 S/F of singleunit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect. 123 S/F of 5core × 3.5sqmm copper conductor cable complate in all respect
