|
| 1 | 11 KV D.O. Fuse Unit Polymer type |
| 2 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 3 | 11 KV Strain hardware (T&C type) fittings |
| 4 | 11 KV Top clamp 65X65X6 mm. angle type |
| 5 | 11 KV V cross arm 65X65X6 mm. angle type |
| 6 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 7 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 8 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 9 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 10 | BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 25 KVA Distribution Transformer |
| 11 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 12 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long = 482.3 kg |
| 13 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 14 | Transformer mounting Channel (100X50x6 mm.) |
| 15 | XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts |
| 16 | Aluminium paint |
| 17 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 18 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 19 | Bentonite compound powder |
| 20 | Bi-metallic clamps Distribution Transformers Bushing |
| 21 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 22 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 23 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 24 | Concreting of structures & foundation (1:3:6) |
| 25 | D.O.Mounting Channel 75x40x6mm |
| 26 | Danger Boards Enamelled 11 KV |
| 27 | Double Gate (2No-2.5\"x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 28 | DTR S/s fencing (31 feet) of 5\" barbet fencing on PCC support of 7No, 6\" Height |
| 29 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 30 | G.I. STRIP 25X3 MM1 |
| 31 | G.I.Pipe 40 mm Dia C grade type |
| 32 | Galvanized nut & bolt with washer |
| 33 | Guarding for line/ Road crossing with 6 SWG GI wire & lacing of 8 SWG GI wire |
| 34 | Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP |
| 35 | M.S.Nuts with Bolts |
| 36 | Meter cum protection box for 25 KVA DTR |
| 37 | Red oxide paint |
| 38 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 39 | Stay Insulators 90X65mm |
| 40 | Stay set 20 mm. complete without Stay wire (Painted) |
| 41 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 42 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 43 | Lebour Charge for Compny Side Material |
| 44 | Lebour Charge for Compny Side Material paide to Cont. % |
| 45 | SGST @ 9% |
| 46 | CGST @9% |
