Tender For Furnishing Works For Sathivada Branch, Vizianagaram-Andhra Pradesh

Tender For Furnishing Works For Sathivada Branch => Limited; 1 False Ceing (Armstrong/Rock Strengh) Providing & fixing in position false cealing in Armstrong/ 600x600 mm x15/16mm Dune supreme RH 99 prime tile framework as specified by Armstrong co with suspenders wherever required Making necessary framework for A.C ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & lever including making grooves and trap doors for A.C. unit in 18 mm thick M R grade plywood with stainless steel hinges & locks with moulding 1 x1 for edges including finishing white plastic Emulsion paint ect. Complete in all respects 2 3. 4 (Note: Only the plan area will be measured for payment. No extra payment will be made for cutouts, grooves, mouldings ect.) Front Office Counter Providing and fixing in position Front Office Counter 2-6 wide as per drawing comprising of the following complete in all respects i) Working top made with 19mm thick plywood finished with 1mm thick laminate. Outside edge of the working top shall be provided with 1% x1 T.W beading patti with melamine finish ii) Vertical facial (Apron) made with 18mm thick plywood finished with 1mm thick laminate with 1mm thick groove at the joint of laminates of two different shades iii) Vertical drop (horizontal band) shall be provided on the facia below the working top made with 18mm thick plywood finished with 1mm thick laminate with provision for concealed light, 1mm thick groove shall be provided at the joint of two different shades of laminate iv) Vertical supports made with 18mm thick plywood finished with white enamel paint v) CPU Stand, Keyboard tray shall be provided of approved model and make. vi) Footrest made with TW member of size 4X1% finished with French polish vii) Drawer units as per drawing shall be provided with multipurpose Godrej locks in Each drawer. Facia of drawer unit shall be finished with 1mm thick taminate and all other sides shall be finished with white enamel paint. The drawers will be provided with handies (Stainless Steel finish) and channels as per approval of the Project Consultant/Bank. Partly Glazed Partition for Cash Cabins Providing and fixing in position 7-7 high partly glazed partition for Cash Cabins as per drawing including door fixing in position partly glazed Full height Supporting system comprising of boral make 51mm x 35mm metal studs at 600mm c/c and 51mm x 32mm metal tracks at floor, middle and 1050 level with joints staggered to avoid through joints. The rate should also include necessary strengthening with studs/tracks or channels at openings shown in the drawings with 8mm plywood on both sides finished with 1 mm thick laminates of approved shade and color as shown in drawings. Cash Counter Providing and fixing in position Cash Counter 2-9 wide as per drawing comprising of the following 1) Working top made with 19mm thick plywood finished with 1mm thick laminate Outside edge of the working top shail be provided with 14X1 Teak Wood moulding finished with melamine polish. Inside edge will be provided with X1 TW beading patti with melamine polish ii) Vertical facia (Apron) made with 18mm thick plywood finished with 1mm thick laminate with thick groove at the joint of laminates of two different shades i) Vertical drop (horizontal band) shall be provided on facia below the working top made with 18mm thick plywood finished with 1mm thick laminate with provision for concealed light. 1mm thick groove shall be provided at the joint of the two different shades of laminate iv) Glazed partition of 1-4 height above working top provided with 12mm thick toughened and frosted glass besides non-transparent film from inside fixed to partition as per fixing details and to boxing with concealed SS. finished D brackets as shown in the drawing. The exposed edges of the glass shall .... more in document

Refer document

Refer document