Tender For Rate Analysis For Various Types Of Floating Triton Tr Series Process Aerator Mixer For Pcmc Area Sewage Treatment Plant- Designing, manufacturing, supplying, erecting, testing and commissioning of Triton TR Series Process Aerator/Mixer With foat Mount Assembly along with panel & Cabling Complete. The Unit supplied must be able to operate in mixing mode & in aeration mode and thus offering dual functionality feature. Unit must have simultaneous aeration & mixing mode. Aspirator based aerator consists of an electric motor & regenerative blower located above the water surface. The motor is connected to hollow shaft with protective housing positioned at 45/60 degree angle downward into the water. Aerators with submersible motors or gear box mechanism are not acceptable. 2 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator -5 HP. 2) Motor rating of Regenerative blower - 2 HP. 3) Total rating - 7 HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 3 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 7.5 HP. 2) Motor rating of Regenerative blower - 2 HP. 3) Total rating - 9.5HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 4 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 10 HP. 2) Motor rating of Regenerative blower - 2 HP. 3) Total rating - 12 HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 5 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 15 HP. 2) Motor rating of Regenerative blower - 3 HP. 3) Total rating - 18HP IE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 6 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 20 HP. 2) Motor rating of Regenerative blower - 3 HP. 3) Total rating - 23HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 7 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 25 HP. 2) Motor rating of Regenerative blower - 5.5 HP. 3) Total rating - 30.5 HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 8 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 40 HP. 2) Motor rating of Regenerative blower - 7.5 HP. 3) Total rating - 47.5HP IE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 9 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator -50 HP. 2) Motor rating of Regenerative blower - 10 HP. 3) Total rating - 60 HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 10 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 60 HP. 2) Motor rating of Regenerative blower - 10 HP. 3) Total rating - 70 HP IE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56. 11 The Process Aerator / Mixer Kit With Float Mount Assembly shall be suitable for the design of following Sizes: 1) Motor rating of Areator - 70 HP. 2) Motor rating of Regenerative blower - 10 HP. 3) Total rating - 80 HPIE-3,415V + 10%, 720 - 750RPM,50 Hz + 5%,F Class Insulation,IP-56.
