Tender For Repair Of Steel/ Wooden Furniture At Mil Stn Dharchula Under Ge(Mes) Pithoragarh., dharchula-Uttarakhand

Tender For Repair Of Steel/ Wooden Furniture At Mil Stn Dharchula Under Ge(Mes) Pithoragarh.; 1 Repair to SOFA SET 5/4 SEATER WITH CUSHION 2 (a) Supply of foam cushion of size 21x 22x 100 mm thick of 32 density for sofa set 5 seater of make sleep well/Kurlon cushion of M/s Kurlon ltd duly covered with tapesty cloth of approved quality and shade complete all as specified and directed Note :- Rate of tapestry cloth not less than that 220.00 per meter and standard width quality and shade shall be approved by GE 3 (b) Supply of foam cushion of size 21x 22x 100 mm thick of 32 density for sofa set 4 seater of make sleep well/Kurlon cushion of M/s Kurlon ltd duly covered with tapesty cloth of approved quality and shade complete all as specified and directed Note :- Rate of tapestry cloth not less than that 220.00 per meter and standard width quality and shade shall be approved by GE 4 (c) M & L for repolishing of complete exposed surfaces of sofa chair 5 seater after preparation of surfaces with one coat of french polish complete all as specified and directed. 5 (d) M & L for repolishing of complete exposed surfaces of sofa chair 4 seater after preparation of surfaces with one coat of french polish complete all as specified and directed. 6 Repair to Table Bed Side 7 a)Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of table, size as shown on drawing, ISI marked andincluding fixing 4 nos hard rubber plugs to be provided on the legs of table bed side Complete all as shown in drgs andas directed. 8 b) Removing of old U/S sides of table bed side and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed. 9 (c) S & F as in replacement of unserviceable handle with new chromium plated D type steel handle 75mm for table bed side of approved quality complete all as specified and directed 10 (d)Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs andas directed. 11 Repair to Table dressing gents with mirror 12 (a)Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of dressing mirror, size as shown on drawing, ISI marked Complete all as shown in drgs andas directed. 13 (b) Removing of old U/S top and bottom sides of table dressing gents and S& F of new sides made of 18/19mm thickpre laminated MDF board all as shown on drg and as directed. 14 (c) Removing of old U/S vertical sides of table dressing gents and S& F of new sides made of 18/19mm thickpre laminated MDF board all as shown on drg and as directed. 15 (d)Removing US looking mirror and S&F of new looking mirror 5mm thick complete including wooden frame fixed with 6mm plywood back side of frame provided all as shown on drawing and as directed. 16 (e) S&F in repairs RAWL plugs of approved quality complete all as shown on drawing and as directed. 17 Repair to TABLE DINING 120x90 CM FD MAP-II/03 18 (a) S & F new table top for dining 120x90cmmade of pre laminated MDF Board 18/19mm thick exterior grade in teak finish duly covered with half round PVC edgining in black colour or approved colour on open ends/all round/all around the table top irrespective of whatever is shown on drawing as in replacement of unserviceable/broken top complete all as specified, shown ondrawing. 19 (b) S & F new leg of table dining 120x90cmmade of shisham wood of size and shape/pattern as in replacement of unserviceable/broken legcomplete all as specified shown on drawing and directed 20 (c)S & F new front/rear rail of table dining120x90 cmmade of shisham wood of size and shape/pattern as in replacement of unserviceable/broken railcomplete all as specified shown on drawing and directed. 21 (d) S & F new side rail of table dining 120x90 cm made of shisham wood of size and shape/pattern as in replacement of unserviceable/broken side railcomplete all as specified shown on drawing and directed. 22 (e) M & L for repolishing of complete exposed surfaces of table diningafter preparation of surfaces with one coat of french polish complete all as specified and directed. 23 Repair toCHAIR DINING 24 (a) Recanning of Chair dining with white plastic cane 4 mmwide gola type shah/premier brand, weaving shall be done in godrej pattern not more than 10 knots in one chair complete all as specified and shown on drawing including removing of unserviceable cane and cleaning the Surfaces for recanning complete all as specified and directed. 25 (b) M & L re-polishing of complete exposed surface of cahir dining after preparation of surface with one coat of french polish all as specified and as directed. 26 (c) S & F of new PVC seat for chair dining and removing/replacement of old unserviceable complete all as specified and shown on drawing and directed by GE. 27 (d) M&L for flat iron of 540 mm long, 25 x 3mm strip supporting to base of chair dinning complete all as specified and as directed. 28 (e) M & L re-polishing of complete exposed surface of cahir dining after preparation of surface with one coat of french polish all as specified and as directed. 29 CHAIR EASY 30 (a)M & L re-polishing of complete exposed surface ofchair easy after preparation of surface with one coat of french polish all as specified and as directed. 31 (b) Recanning of wooden/steel furniture as per the requirement with white plastic cane 2 to 2.5 mmwide gola type shah/premier brand, weaving shall be done in godrej pattern not more than 10 knots in one chair complete all as specified and shown on drawing including removing of unserviceable cane and cleaning the holes for recanning complete all as specified and directed. 32 TEAPOY 33 (a) S & F of new teapoy top made of pre laminated MDF board 18/19mm thick exterior grade in teak finish duly covered with half round PVC edgining in black colour or approved colour on open ends/alll round/all around the table top irrespective of whatever is shown on drawing as in replacement of unserviceable/broken top andincluding fixing 4 nos hard rubber plugs to be provided on the legs of teapoy complete all as specified, shown on drawing complete all as specified and directed. 34 (b) M & L for repolishing of complete exposed surfaces of teapoy after preparation of surfaces with one coat of french polish complete all as specified and directed. 35 TABLE OFFICE CLERK WOODEN FD- DB-4120 36 (a) S & F new table top overall size 5x3 made of pre laminated MDF board 18/19 mm thick exterior grade in teak finished duly covered with PVC edging in black or approved colour on all around the table top irrespective of whatever shown on drawing as in replacement of old unserviceable/broken top complete all as specified, shown on drg and directed. 37 (b)M & L for repolishing of complete exposed surface of table office officers/clerk wooden after preparation of surface with french polish complete all as specified and directed. 38 (c) S & F new lock in replacement of old unserviceable lock to any type of table wooden with duplicate key as per size and shape complete all as specified and directed. 39 TABLE CENTRE 40 (a) S & F of new table top made of pre laminated MDF board 18/19 mm thick exterior grade in teak finished duly covered with PVC edging in black or approved colour all around as in replacement of old unserviceable/broken topincluding fixing 4 nos hard PVC Shoes to be provided on the legs of table centre complete all as specified, shown on drg and directed. 41 (b) S & F new leg of table Centre made of shisham wood of any shape/pattern as in replacement of unserviceable/broken leg complete all as specified, shown on drg and directed. 42 (c) All as per item No. 9.02 above but new front/rear rail of Table Centre complete all as specified and directed. 43 (d) All as per item No. 9.02 above but new side rail of Table Centre complete all as specified and directed. 44 (e) M & L for repolishing of complete exposed surfaces of table centre after preparation of surfaces with one coat of french polish complete all as specified and directed 45 TABLE PEG 46 (a) S & F of new table top made of pre laminated MDF board 18/19 mm thick exterior grade in teak finished duly covered with PVC edging in black or approved colour all around as in replacement of old unserviceable/broken top including fixing 4 nos hard PVC Shoes to be provided on the legs of table peg complete all as specified, shown on drg and directed. 47 (b) S & F new leg of table peg made of shisham wood of any shape/pattern as in replacement of unserviceable/broken leg complete all as specified, shown on drg and directed. 48 (c) All as per item No. 10.02 above but new front/rear rail of Table Peg complete all as specified and directed 49 (d) All as per item No. 10.02 above but new side rail of Table Peg complete all as specified and directed. 50 (e) M & L for repolishing of complete exposed surfaces of table peg after preparation of surfaces with one coat of french polish complete all as specified and directed. 51 CHARPOY GI PIPE WITH PLY TOP 52 (a) Taking out unserviceable ply wood top from charpoy plywood top and s & F 12 mm thick plywood topp commercial type BWR grade with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet andincluding fixing 4 nos hard wooden shoes to be provided on the legs of charpoy complete all as specified and directed. 53 (b) S & F 1884 mm long 32 mm bore ISI marked GI pipe medium grade long rail including threading on both ends (one side 22mm and another side 44mm) and fixing the same to charpoy GI pipe complete all as specified and directed. 54 (c) Converting of broken long rail retrieved in replacement from item No. 11.02 here in before into two short rail of size 804 mm long threading on both ends upto 22 mm and fixing the same to charpoy GI frame complete all as specified and directed 55 (d) Converting of broken short rail retrieved in replacement from item No. 11.02 here in before into two legs of size 400 mm long threading on both ends upto 22 mm and fixing the same to charpoy GI frame complete all as specified and directed 56 (e) S & F in replacement three ways GI Elbow 32mm size 60mm long make Jolly/RK/ISI marked as approved by GE complete all as specified and directed 57 (f) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed 58 (g) Preparation of legsof GI pipe out of broken short rail after cutting and threading and made suitable for fixing . Rest as directed 59 CHARPOY STEEL WITH PLY TOP 60 (a) Taking out unserviceable ply wood top from charpoy plywood top and s & F 12 mm thick plywood topBWR grade make Archid/Century ply/Green ply with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet including tightening/assembling of loose frames/componenet andincluding fixing 4 nos hard rubber shoes to be provided on the legs of charpoycomplete all as specified and directed 61 (b) All joints welding & fixing shall be done in accordance with the standard work manshop/specification the weldingjoints shall be filled smooth before application complete all as specified and directed 62 (c)Paintpainting shall be done with two coats of synthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed 63 (d)6 Nos of MS Plate of size 25x60MMx6mm MS Cleat welded frame to support ply 64 (e) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed 65 CHAIR VERANDAH STEEL 66 (a) Removing of old unsv plastic cane from chair verandah and recaning to seat & back by 4 mm wide half round oval shape plastic cane andincluding fixing 4 nos hard rubber shoes to be provided on the legs of chair verandah restall as specified and shown on drg and directed 67 (b) M & L for steel painting of complete exposed surfaces of chair verandah steel after preparation of surfaces with one coat of synthetic enamel paint complete all as specified and directed 68 ALMIRAH LARGE/MED STEEL WITH SELVES/LOCKER BED SIDE STEEL 69 (a) Removing of dent and bent and preparation the old painted surface of Almirah large steel as per as per drawing no. FD-1031 67 (M) esternally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, applying putty and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey with spray machine complete all as specified and directed 70 (b) All as per item No. 14.01 herein before but internally with shelves complete all as specified and directed 71 (c) Removing of dent and bent and preparation the old painted surface of Almirah Med steel as per as per drawing no. FD-1032/ 67 (M) externally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, applying putty and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey with spray machine complete all as specified and directed 72 (d) All as per item No. 14..03 herein before but internally with shelves complete all as specified and directed 73 (e) Removing of dent and bent and preparation the old painted surface of Locker bed side steel as per as per drawing No. 1029 externally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, applying putty and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey with spray machine complete all as specified and directed 74 (f) All as per item No.14.05 here in before but internally with shelves complete all as specified and directed 75 (g)S & F as in replacement of unservicealble lock with new lock having duplicate key of same size/specification to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed. 76 (h) S & F as in replacement of unserviceable handle with new chromium plated steel handle of same size /specification to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed. 77 (j)S & F new chromium plated hasp & staple of same shape and size dixing the same appropriate size of nut & bolt to locker bed side FD-1029 wherever reqd as inreplacement of old/unsv as shown on drg and directed. 78 (k) S & F as in replacement of unserviceable locking device set complete including locking bar, lever and cover with 3 way new locking device set to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed 79 (l) S & F as in replacement of unserviceable/broken aluminium hanging rod with new chromium plated steel hanging rod of 19 mm dia and 1 mm wall thickness with one pair of fixing brackets to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed 80 CHAIR CB STEEL WITH ARMS 81 (a) Removing existing unserviceable seat of chair CB steel with arms. Cleaning rebated portion and welding wherever required, smoothing with emery paper and painting with one or more coat required with synthetic enamel paint OG to steel frame complete all as specified and directed. 82 (b) Supply and fixing of new seat of chair CB steel with arms made out of 1st class hardwood (Shisham) duly painted and canning with cane plastic 2 to 2.5 mm thick Godrej pattern and border with 4 mm cane plastic and fixing the same with appropriate size of nuts & bolts to steel frame as shown on drg and as directed. 83 (c) S & F New back rest frame for steel chair CB with arms steel made of 2nd class hardwood of size 480x350mm/440x380mm/460x360mm duly painted complete all as specified and directed. 84 (d)Removing of existing unsv pvc shoes & PVC plug of chair CB steel with /without arms and S & F new shoes with screw at botom of steel frame and steel frame and PVC plug at notches holes at top complete al as shown in drg complete all as specified and directed. 85 (e) S & F flat iron strip 500x25x3 mm 4 Nos undereach seat and 02 Nos of each back of chair fixed with running welding to steel frame duly providing holes for screws and all as directedby Engr -in -charge

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-08-2025	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	30-08-2025

INR 500 /-

INR 12 Lakhs /-