Tender For Repair Renewal Of Wooden Furniture And Steel Furniture At Rms Dholpur Under Ge Bharatpur.; 1.00 Almirah steel large /medium /small ( FD-1031,FD-1032, FD1033, ,FD-67(M), FD-104(M):-Taking out existing old UNSV MS handle of almirah steel largel/medium/small (1031, FD-1032,FD1033, FD-67M,104(M)) and S&F new MS handles chromium plated (ISI marked, make : Godrej/Rina/Link) suitable for Almirah steel large /medium /small complete all as specified. 2.00 Taking out existing old UNSV lock of almirah steel large /medium /small (1031, FD-1032, FD1033, FD-67M,104(M) and S&F new lock with double key (ISI marked, make : Godrej/Link) suitable for Almirah steel large/medium complete all as specified. 3.00 Taking out existing old UNSV lock cap of almirah steel large /medium /small (1031, FD-1032, FD1033, FD-67M,104(M) and S&F for lock cap of almirah steel large /medium complete all as specified. 4.00 Taking out existing old UNSV complete locking device from shutter of Almirah steel large (1031 FD1033,FD-67M,104(M) and S&F new locking device on shutter of Almirah steel large (1031,FD1033, FD-67M,104(M) properly. Shutter locking device MS rod should be not less then 08 mm thick and PGI sheet assy not less then 01 mm thick including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 5.00 Taking out existing old UNSV complete locking device from shutter of Almirah steel small (FD-1032) and S&F new locking device on shutter of almirah steel small (FD-1032) properly. Shutter locking device MS rod should be not less then 0 8mm thick and PGI sheet assy not less then 01 mm thick including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 6.00 Taking out existing old UNSV leg portion of Almirah steel large, Almirah steel with glass door of FD1031, FD-1032, FD1033, FD-67M,104(M) and S&F by welding of leg portion made to shape by plain sheet(1.2mm) of size 470 x 82 x 100 mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 7.00 Removing of old UNSV leg portion of almirah steel medium/small (FD 1032) and S&F by welding of leg portion made to shape by 18 gauge plain sheet (1.2mm) of size 415 x 82 x 100 mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 8.00 (FD 1032, Fixing only of steel sheet shelves in almirah small of any thickness and any size/ shape by providing new screws or brackets or stoppers as in repair as complete all as specified. (shelves to be obtained from old unserviceable steel almirah) 9.00 Removing of old UNSV shelves of almirah steel large ( FD-1031,FD-67M,104(M) and S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet duly painted with two coats of synthatic enamal paint over a coat of red oxide primer complete all as specified. 10.00 Taking out existing old UNSV both shutters of almirah steel large (FD-1031, FD-67(M)) and S&F new both shutters of almirah steel large (FD-1031, FD-67(M). properly including locking device, lock and handle. Shutter should be made of 01 mm thick PGI sheet ISI marked including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 11.00 Taking out existing old UNSV both shutters of almirah steel small (FD-1032) and S&F new both shutters of almirah steel small (FD-1032) properly including locking device, lock and handle. Shutter should be made of 01 mm thick PGI sheet ISI marked including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 12.00 (FD 1031,FD1032, FD 1033, FD-67(M))104(M) S&F godrej pattern MS hinges shape & size as existing in steel almirah fixed by welding complete all as specified. 13.00 M&L for preparing old painted steel surfaces of steel almirah (large) (FD-1031, FD-1033,FD 67(M))104(M) and painted to all internal and external surface complete by spray with one coat of synthetic enamel paint (OG) complete all as specified. 14.00 All as item No 13 but steel almirah medium and small (FD-1032, ) 15.00 Stool steel 510 mm FD 81(M):- M&L for preparing old painted steel surfaces of stool steel 510 mm high and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces (FD-81M) complete all as specified. 16.00 Table dinning T-402DL of (Godrej) :-Taking out old UNSV top of table dinning and S&F new top of table dinning of T-402 DL(Godrej including 4mm thick teak wood beading around the table top fixed to table frame by fevicol & steel screws. Top should be made of 19 mm thick prelaminated particle board ISI marked exterior grade complete all as specified. 17.00 M&L for preparing old painted steel surface of table dinning and one coat of synthatic enamal paint on surfaces complete all as specified. 18.00 Chair CB steel without arms (FD 75(M)): M&L for back frame of chair CB steel without arms (FD 75(M)). Back frame should be made of well seasoned IInd class HW free from all knots and defect duly caned with white coloured of 2 to 2.5 mm wide half round cane and bordered with 3.5 mm half round cane and painted with two coats of black synthatic enamal paint over a coat of wood primer after preparation of surface and fixing to chair with 75 mm long full threaded steel screw, washers and nut bolts as applicable including taking down old unserviciable back complete all as specified. 19.00 All as per items ser No18 but seat frame of chair CB steel without arms complete all as specified. 20.00 M&L for preparing old painted steel surface of chair CB steel with arms or without arms (FD-75(M)) with one coat of synthatic enamal paint on wooden surfaces complete all as specified. 21.00 Book self open large steel FD-69(M)):-Removing of old UNSV shelves of book shelf open large steel and S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint over a coat of red oxide primer as complete all as specified. 22.00 M&L for preparing old painted steel surfaces of book self open large steel FD-69(M) and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete all as specified. 23.00 Table Writing (1145x 600 x 760mm) (FD-275, ) :Taking out of old unserviceable top of table writing (1145 x 600 x 760) mm and S & F new top of table writing including 4mm thick teak wood beading alround of top. Top should be made of 19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white complete all as specified. 24.00 Taking out of old unserviceable legs of Table writing (1145 x 600 x 760mm) and S & F new legs of Table writing (1145 x 600 x 760mm) including one coat of wood primer over wooden surface. Legs should be made of 1 st Class hard wood well seasoned (Teak wood) free from all knots & creck, all as shown in drawing and complete all as specified. 25.00 All as per items ser No 23 but Top (long) rail of Table writing (1145 x 600 x 760mm). 26.00 All as per items ser No 23 but Top (short) rail of Table writing (1145 x 600 x 760mm). 27.00 All as per items ser No 23 but Lower rail of Table writing (1145 x 600 x 760mm). 28.00 Taking out of old unserviceable drawers of Table writing (1145 x 600 x 760mm)and S & F new drawers of Table writing (1145 x 600 x 760mm) including best quality fancy type PVC knob 32 mm dia and fixing of locking device all as per shown in drawing and complete all as specified. 29.00 M&L for repair of all loose wooden parts of table writing (1145 x 600 x 760mm) and M&L two coat of french polish on all exposed surface of Table writing (1145 x 600 x 760mm) including preparation of surface all as shown in drawing complete all as specified. 30.00 Table (900 x 900 x 760 mm) FD-291:-Taking out old UNSV particle board top/part of table 900 x 900 x 760 mm, and S&F new top/part on the same items. Top should be made of 19 mm thick prelaminated particle board ISI marked decorated type exterior grade, including half round teak wood beading around the table top with fixed to table frame by steel screws & fevicol complete. Beading should be made of teak wood not less than 6 mm thick. all as shown on drawing and complete all as specified. 31.00 Taking out old UNSV leg of Table (900 x 900 x 760 mm), and S&F new leg of Table (900 x 900 x 760mm), including one coat of wood primer of lower wooden surface, legs should be made of 1st class hard wood well seasoned (Teak wood) free from all knots & crack all as shown in drawing complete all as specified. 32.00 All as per items ser No 30 but top long rail of table (900 x 900 x 760 mm), all as shown in Drawing complete all as specified. 33.00 Table Steel Tublar 920 x 920 x 760mm :- M&L for preparing old painted steel surface of table with one coat of synthatic enamal paint (OG) with spray machine to table steel tubular 920 x 920 x 760 mm complete all as specified. 34.00 Charpoy GI Pipe 32mm MDF withTop (FD-220):-Taking out old UNSV long rail of charpoy GI MDF Top (FD-220) and S&F new long rail made of GI pipe 32 mm dia medium grade ISI marked. One nos new flate iron size 900mm x 25mm x 6mm long in the centre of long rail of each charpoy to be fixed by welding duly one nos hols for fixing of MDF board by flat head nut bolt with washer complete all as specified. 35.00 Taking out existing old broken short rail Charpoy GI pipe 32mm with MDF top and providing in position short rails made out of old broken longs rail obtained from item No 34 were in before including threading on both ends Fixing all as specified and shown on drawing complete all as specified. 36.00 Taking out existing old UNSV broken leg from charpoy GI pipe 32 mm with MDF top and providing in position made out of GI pipe 32 mm dia obtained from item No 35 and S&F IInd class HW block fitted at bottom of leg with screw and two Nos MS clamp of size 25mm x 3 mm size welded on legs incl painting of clamps with two coat of synthetic enamel Silver paint over a coat of red oxide primer complete all as specified. 37.00 Taking out old unserviceable MDF Top from each charpoy GI pipe 32 mm with MDF Top(FD-220) and S&F new commercial plywood ISI mark 12mm thick of size 66 x 3 on the top with flate head nut & bolt with washer complete all as specified. 38.00 Taking out old unserviceable three way elbow from long rail /short rail etc of Charpoy GI pipe with MDF Top (FD-220) and supply and fixing in position new three way eilbow 32mm dia med. grade (ISI marked) complete all as specified. 39.00 Taking out old unserviceable check nut from long rail /short rail etc of GI pipe Charpoy (FD-220 ) and supply and fixing in position new check nut 32mm dia 6mm thick complete all as specified. 40.00 Desk Steel FD 1020-Taking out old unserviceable top, seat & back portion of Desk and S&F new top, seat and back in the same place of desk with nut and bolt. Top seat & back should be made of 19 mm thick prelaminated particle board on both faces decorated type exterior grade, including half round teak wood beading around the table top fixed to table frame by steel screw complete all as specified. 41.00 M&L for preparing old painted steel surfaces of desk steel spray painted with one coat of synthetic enamel paint white to all internal and external surfaces of desk steel complete all as specified. 42.00 Two Seater Chair with Desk achiver model No 2&3:- Taking out old unserviceable MS conduit pipe part of desk achiver and S&F new MS conduite pipe (25 x 25 x 2 mm thick) on the same place by welding. All loose part of desk achiver model No 2 & 3 will be fixed by welding and nut bolt including one coat of synthetic enamel paint of all steel complete all as specified. 43.00 Two Seater Chair with Desk achiver model No 2&3:- Taking out old unserviceable PGI sheet part of desk achiver and S&F new PGI sheet (1mm thick) on the same place by welding. All loose part of desk achiver model No 2 & 3 will be fixed by welding and nut bolt including one coat of synthetic enamel paint of all steel complete all as specified. 44.00 Taking out of old unserviceable top, seat & Back of two seater chair with desk achiver moder (2 & 3) S & F new top, seat & Back of desk encluding 4mm thick half round teak wood beading alround the top. Top should be made of 19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white all as per shown in drawing complete all as specified. 45.00 M&L for preparing old painted steel surfaces of desk achiver model No 2&3 and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of desk achiver model No 2&3 complete all as specified. 46.00 Bed MS Godrej, Model Opal:-Taking out old unserviceable leg from head rest side of bed MS Godrej, model Opal and S&F new leg on the same places with nut and bolt including all wood work surface shall be painted with one coat of wood primer except where painting is indicated in Drg, legs should be made of Ist class well seasoned hard wood free from all knots & creck all as per shown in drawing complete all as specified. 47.00 Taking out old unserviceable leg from foot rest side of Bed MS Godrej, Model Opal and S&F new leg on the same places with nut and bolt including all wood work surface shell be painted with one coat of wood primer except where painting is indicated in Drg. Legs should be made of Ist class well seasoned hard wood free from all knots & crecks all as per shown in drawing complete all as specified. 48.00 Taking out of old unserviceable ply wood from bed ms godrej model opal and S & F new ply wood 12mm thick, ISI marked commarcial BWR with phenol fromaldehyde, all as per shown in drawing complete all as specified. 49.00 Locker bed side steel (FD-1029):-Taking out existing old MS handle of Locker bed side steel (FD-1029). S&F new MS handle (150mm long) chromium plated suitable for Locker bed side steel. MS handle chromium plated will fixed with shutter of Locker bed side steel all as per drawing complete all as specified. 50.00 Taking out existing old UNSV Hasps and staple of locker Bed side steel (FD-1029). S&F new Hasps and staple suitable for locker bed side steel all as per drawing complete all as specified. 51.00 Removing of old leg portion of locker bed side steel (FD-1029). S&F new leg of locker bed side by welding of leg portion made to shape by plain sheet (1.2mm thick) duly painted by two coats of synthetic enamel paint over a coat of red oxide primer all as per drawing complete all as specified. 52.00 M&L for preparing old painted steel surface of Locker bed side steel (FD-1029) and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surface complete all as specified. 53.00 Side board FD-26:- Taking out old unserviceable drawer handle of side board and S&F new U type stainless steel drawer handle 100 mm x 40 mm of side board l with necessory fitting arengement. all as per shown in drawing and directed by GE. 54.00 M&L for preparing old painted steel surface of Book case open small steel and spray painted with one coats of synthetic enamel paint(OG) to all internal and external surfaces complete all as specified. 55.00 Form with back FD-78 :- Taking out old unserviceable seat of form with back ( FD-78 ) and S&F new plank Size (1800x150x18 mm ) on seat and back of form with back with nut and bolt with washer of size 65x6mm.Plank should be made of Ist class hard wood well seasoned free from all knots & crecks all as shown in drawing complete all as specified. 56.00 Taking out old unserviceable MS conduit pipe of Form with back and S&F new MS conduite pipe (25x25x2mm thick) on the same place by welding including one coat of black colour synthetic enamel painting of all steel surface complete all as specified. 57.00 M&L for preparing old painted steel surface of form with back( FD-78,) with one coats of synthetic enamel paint complete all as specified. 58.00 Form with out back FD 77(M):- Taking out old unserviceable seat of foam without back (FD-77M,) and S&F new plank on seat of Form without back with nut and bolt with washer of size 65 x 6mm . Plank should be made of Ist class hard wood well seasoned free from all knots & crecks all as shown in drawing complete all as specified. 59.00 Taking out old unserviceable MS conduit pipe of Form with out back and S&F new MS conduite pipe (25x25x2mm thick) on the same place by welding including one coat of black colour synthetic enamel painting of all steel surface complete all as specified. 60.00 M&L for preparing old painted steel surface of form without back(FD-77M ) with one coats of synthetic enamel paint complete all as specified. 61.00 Table centre (FD-274) :- Taking out of old unserviceable top of table centre and S & F new top of table centre (900X450X400)mm encluding 4mm thick half round teak wood beading alround the top. Top should be made of 19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white all as per shown in drawing complete all as specified. 62.00 Table Centre (FD-274) :- Taking out of old unserviceable legs of table centre and S & F new legs of table centrer including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & crecks all as per shown in drawing complete all as specified. 63.00 All as per items ser No 61 but long rail of Table Centre. 64.00 All as per items ser No 61 but short rail of Table Centre. 65.00 All as per items ser No 61 but Bottom rail of Table Centre. 66.00 Prepration of surface of Table Centre repairing to all loose wooden parts and M&L two coat french polish on all exposed surface of Table Centre complete all as specified. 67.00 Peg Table FD-227, FD/MAP/11 : Taking out of old unserviceable top of peg table and S & F new top of peg table encluding 4mm thick half round teak wood beading alround of top. Top should be made of 19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white all as per shown in drawing complete all as specified. 68.00 Taking out of old unserviceable legs/ top rail of peg table and S & F new legs/top rail of peg table including all wood work surface shell be one coat of wood primer except where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & crecks all as per shown in drawing complete all as specified. 69.00 Sofa set 5/4 Seater (FD-281) :- Taking out of old unserviceable cushioned seat & back of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mmx560 mm for seat & back of sofa set 5/4 seater . Cushion shall be covered with best quality tapestry cloth duly stitch. Colour /quality of cloth shall be approved by GE all as per shown in drawing. 70.00 Teapoy Wooden 600x450x540mm (FD-278, ) : Taking out of old unserviceable top of Teapoy wooden and S & F new top of Teapoy wooden including 3mm thick teak wood beading alround of top. Top should be made of 19 mm thick prelaminated particle board bonded with phenol fromaldehyde confirming IS- 3087-1985 one side decorative type other side balansing white all as per shown in drawing complete all as specified. 71.00 Taking out of old unserviceable legs of Teapoy wooden and S & F new legs of Teapoy wooden including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (Teak wood) free from all knots & crecks all as per shown in drawing complete all as specified. 72.00 All as per items ser No 70 but Top long rail of Teapoy wooden. 73.00 All as per items ser No 70 but Bottom rail of Teapoy wooden 74.00 Prepration of surface of teapoy wooden with fixing all loose wooden parts of furniture and M&L two coat french polish on all exposed surface of teapoy wooden complete all as specified. 75.00 Table 1520x860x760 mm FD-280 : Taking out of old unserviceable top of table 1520x860x760 mm and S & F new top of 1520x860x760 mm including 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white all as per shown in drawing complete all as specified. 76.00 Taking out of old unserviceable legs of table 1520x860x760 mm and S & F new legs of table 1520x860x760 mm including all wood work surface shell be one coat of wood primer except where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & crecks all as per shown in drawing complete all as specified. 77.00 All as per items ser No 75 but long rail of Table 1520x860x760 mm 78.00 All as per items ser No 75 but short rail of Table 1520x860x760 mm. 79.00 All as per items ser No 75 but Stiffner of Table 1520x860x760 mm 80.00 All as per items ser No 75 but Bracket of Table 1520x860x760 mm 81.00 Prepration of surface of Table 1520x860x760 mm with fixing all loose wooden parts of table and M&L two coat french polish on all exposed surface of Table 1520x860x760 mm complete all as specified. 82.00 Bed Ply wood top (FD-246/247):- Taking out of old unserviceable ply wood from bed ply wood top and S & F new ply wood 12mm thick, ISI marked commarcial BWR quality bonded with phenol fromaldehyde on bed ply wood top all as per shown in drawing complete all as specified. 83.00 Taking out of old unserviceable head rest of bed ply wood top and S & F new Head rest with short rail of plywood top. head rest made of commercial ply wood 4 mm thick (both side i.e. Inside & outside)with teak wood beading 35mm wide and 6mm thick around of the head all as per shown in drawing complete all as specified. 84.00 Taking out of old unserviceable foot rest of bed ply wood top and S & F new foot rest with short rail of plywood top. Foot rest made of commarcial ply wood 4 mm thick (both side i.e. Inside & outside)with teak wood beading 35mm wide and 6mm thick around of the head all as per shown in drawing complete all as specified. 85.00 Taking out of old unserviceable long rail of bed ply wood top and S & F new long rail of plywood top including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (Teak wood) free from all knots & crecks all as per shown in drawing complete all as specified. 86.00 Taking out of old unserviceable wooden short rail of Bed ply wood top and S & F new short rail of bed ply wood top including all wood work surface shell be one coat of wood primer. short rail should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck all as per shown in drawing complete all as specified. 87.00 Taking out of old unserviceable wooden legs of Bed ply wood top and S & F new legs of bed ply wood top including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck all as per shown in drawing complete all as specified. 88.00 Desk and Chair for Single Student of overall size Make Durian:- Taking out old unserviceable MS conduit pipe part of Desk and Chair for Single Student of overall size and S&F new MS conduite pipe (25x25x2mm thick) part on the same place by welding. All loose MS part of Desk and Chair for Single Student of overall size will be fixed by welding and nut bolt including one coat of synthetic enamel painting of all steel surface complete all as specified. 89.00 Desk and Chair for Single Student of overall size Make Durian:- Taking out old unserviceable PGI sheet part of Desk and Chair for Single Student of overall size and S&F new MS PGI sheet (1mm thick) part on the same place by welding. All loose MS part of Desk and Chair for Single Student of overall size will be fixed by welding and nut bolt including one coat of synthetic enamel painting of all steel surface complete all as specified. 90.00 Taking out of old unserviceable top , seat & Back of desk and chair for single student of overall size make durin S & F new top, seat & back of desk encluding 4mm thick half round teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board (Blue colour) bonded with phenol fromaldehyde one side Blue colour type other side balancing white all as per shown in drawing complete all as specified. 91.00 M&L for preparing old painted steel surfaces of Desk and Chair for Single Student of overall size Make Durian and spray painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of Desk and Chair for Single Student of overall size Make Durian complete all as specified. 92.00 Table Steel 900 x 900 x 760 mm FD 1009:-Taking out old UNSV particle board top/part of table steel 900 x 900 x 760 mm, and S&F new top/part on the same items. Top should be made of 18 mm thick prelaminated particle board ISI marked decorated type exterior grade, including half round teak wood beading around the table top with fixed to table frame by steel screws & fevicol complete. Beading should be made of teak wood not less than 6 mm thick as shown on drawing and complete all as specified. 93.00 Chair Writing (FD/E6/MAP/12):- Taking out of old unserviceable Seat and Back of Chair Writing with arms (FD/E6/MAP/12) and S & F new Seat & Back of the same. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55kg per cubic meter thick and hardness 20 +/-2 kg on hampden machine. back foam shall be designed with cintoured lumber support for extra comfort and 120mm thick hot pressed plywood upholstered with fabric( Acrylic, polyester, poly propylene) and moulded polyesthane foam with PVC lipping all around,welding work all as per shown in drawing complete all as specified. 94.00 Taking out of old unserviceable Arm rest of Chair writing (FD/E6/MAP/12) and S&F new Arm rest of the same. One peace of arm rest made of black integral skin polyurethane wih 75-85 shore A hardness and reinforced with MS insert. It shall be scratch & weather resistant, both hand rest section to have slope towards front all as per shown in drawing complete all as specified. 95.00 Charpoy with Hard Top (FD/MAP-II/01):-Taking out old unserviceable MDF Top from each Charpoy with Hard Top (FD/MAP-II/01) and S&F new 12 mm thick plywood commercial Both face BWR grade ISI mark fixed with flate head nut & bolt with washer complete all as specified. 96.00 Chair CB steel with arms (FD 75(M)): M&L for back frame of chair CB steel with arms (FD 75(M)). Back frame should be made of well seasoned IInd class HW free from all knots and defect duly caned with white coloured of 2 to 2.5 mm wide half round cane and bordered with 3.5 mm half round cane and painted with two coats of black synthatic enamal paint over a coat of wood primer after preparation of surface and fixing to chair with 75 mm long full threaded steel screw, washers and nut bolts as applicable including taking down old unserviciable back Complete all as scecified. 97.00 All as per items ser No 96 but seat frame of chair CB steel with arms. 98.00 All as per items ser No 96 Removing unserviceable/worn out handle from chair CB Steel with arm and S&F new handle made out of second class hard wood duly two coats of black colour synthetic enamel paint over a coat of pink primer complete all as specified on drawing. 99.00 Book self open Small steel FD-69(M)):-Removing of old UNSV shelves of book shelf open Small steel and S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint over a coat of red oxide primer as complete all as scecified. 100.00 Notice Board with Glass 1830 X 1220 MM FD 99 (M)):- Taking out old unserviceable back of Notice Board with Glass 1830 X 1220 MM FD 99 (M) and S&F new plank on the same place. Plank should be made of Ist class hard wood well seasoned free from all knots & crecks all as shown in drawing complete all as specified. 101.00 Notice Board with Glass 1830 X 1220 MM FD 99 (M)):- Taking out old unserviceable glass of Notice Board with Glass 1830 X 1220 MM FD 99 (M) and S&F new glass on the same place all as shown in drawing complete all as specified. 102.00 Stool Revolving Adjustable Steel FD-354 ):- M&L for preparing old painted steel surfaces of Stool Revoling Adjustable Steel (FD-354) high and spray/Brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces (FD-354) complete all as specified. 103.00 Stool Revolving Adjustable Steel FD-354 ):- Taking out of old unserviceable Seat of Stool Revoling Adjustable Steel ( FD-354 ) S & F new Seat of the same. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 kg per cubic meter all as per shown in drawing complete all as specified. 104.00 Supreme Diva Chair (Green Colour) Make: Supreme - Taking out of old unserviceable Transparent back of supreme Diva Chair (Green Colour) Make: Supreme S & F new Transparent back of the same all as per shown in drawing complete all as specified. 105.00 Chair Dining Officer (FD/MAP/02)- S&F of new back rail made out of 1st class hard teak wood well seasoned free from cracks & dead knots and tightening the whole frame and remoing existing unserviceable rail shown in drawing complete all as specified. 106.00 All as per items ser No 105 but taking out of old unseviceable cushion foam with cover existing size and supply & fix new cushion foam sheet 75mm thick and haing 40 density covered with tapestry cloth not less than 350 per meter fabric fitted on 12 mm thick commercial plywood BWR grade of existing size all as specified and shown shown in drawing complete all as specified. 107.00 All as per items ser No 105 rear leg of Chair dining officer. 108.00 All as per items ser No 105 back of Chair dining officer. 109.00 All as per items ser No 105 but Front leg of Chair dining officer. 110.00 Chair Dining JCO/OR FD/26/MAP- Taking out of old unserviceable wooden front leg of chair dining and S & F new leg of chair dining including all wood work surface shell be one coat of wood primer.leg should be made of 1st class hard wood well seasoned (teak wood ) free from all knots & creck all as per shown in drawing complete all as specified. 111.00 All as per items ser No 110 but rear leg of Chair dining JCO/OR 112.00 All as per items ser No 110 but front rail of Chair diningJCO/OR 113.00 All as per items ser No110 but rear rail of Chair diningJCO/OR 114.00 All as per items ser No 110 but side rail of Chair dining JCO/OR 115.00 All as per items ser No 110 but stiffner rail of Chair diningJCO/OR. 116.00 Taking down of old canning from chairs dining JCOs/ORs M&L for recanning of chair with best quality white plastic cane 2 to 2.5mm wide and border with 4mm wide plastic cane,weaving of chairs shail be godrej pattern all as per shown in drawing complete all as specified. 117.00 Chair Easy FD-229- Taking out of old unserviceable wooden front leg o chair easy and. S&F new front leg of chair easy including all wood work surface shell be one coat of wood primer leg should be made of 1st class hard wood well seasoned (teak wood) free from all knots & crack all as per shown in drawing complete all as specified. 118.00 All as per items ser No 117 but rear leg of Chair Chair Easy . 119.00 All as per items ser No 117 but back frame of Chair Chair Easy . 120.00 All as per items ser No 117 but side frame of Chair Chair Easy . 121.00 All as per items ser No 117 but arms of Chair Chair Easy . 122.00 Taking down of old canning from chair easy M&L for recanning of chair with best quality white plastic cane 2 to 2.5mm wide and border with 4mm wide plastic cane,weaving of chairs shail be godrej pattern all as per shown in drawing complete all as specified. 123.00 Chair Varanda FD-359 - Taking out of old unserviceable plastic cane from chair varandah ,belding the loose/broken portion of chair frame wherever required and applying one coat of synthetic emamel paint white on frame, Re-caning the chir with 5mmx0.4mm thick plastic cane good quality (recycled cane shall not be used) .Provided with 04 Nos rubber shoes to legs of chair varandah. all as per shown in drawing complete all as specified. 124.00 Table Officer Steel FD-1003- M&L painting complete table by means of spray painting with one coat synthetic enamel paint OG color to the tabe frames,drawers and cabinet inside and outside after preparation of surfaces by scrapping as directed after completion of welding work where-ever required all as per shown in drawing complete all as specified. 125.00 Table Steel 900 x 900 x 760 mm FD 1009 M&L for preparing old painted steel surfaces of Table Steel 900 x 900 x 760 mm FD 1009 and spray/brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of Table Steel 900 x 900 x 760 mm FD 1009 complete all as specified. 126.00 Peg set of three (FD-253) M&L two coat french polish on all wooden exposed surface of peg set of three with best work man ship all as per shown in drawing and complete all as specified. 127.00 Table Office Clerk Steel (FD-1004) Taking out of the UNSV table top and providing new top of size 1220mm lengthx610mm width, made out of 18mm thick pre-laminated particle board including 4mm thick teak beading all round the table top complete duly French polished all as per shown in drawing complete all as specified. 128.00 Table Office Clerk Steel (FD-1004) Painting complete table by means of spray painting with one coat of synthetic enamel paint OG colour to the table frames, drawers and drawer cabinet in side out side after preparation of surfaces by scrapping after completion of necessary welding work wherever required all as specified on drawing complee all as specified. 129.00 Almirah large with glass door steel (glazzed) FD-104(M) Taking out old UNSV glass of almirah large steel glazed FD-104M and S&F new transparent glass made of 6 mm thick as specified ISI marked best quality of Size 750 mm x 230 mm wiith necessory fitting arrangement all as per shown in drawing and complete all as specified. 130.00 Bed MS Godrej, Model Opal:- M&L for preparing old painted surfaces of MS Godrej, Model Opal and painted to all external surface complete by spray/brush with one coat of synthetic enamel paint (Black ) complete all as specified. 131.00 Chair Writing Black (Drg No GEB/FUR/01):- Taking out of old unserviceable Seat and Back of Chair Writing Black (Drg No GEB/FUR/01) and S & F new Seat & Back of the same. The cloth and foam shall be 50 mm thick and shall be moulded with density 50-55kg per cubic meter thick and hardness 20 +/-2 kg on hampden machine. back foam shall be designed with cintoured lumber support for extra comfort and 120mm thick hot pressed plywood upholstered with cloth and foam moulded. all as per shown in drawing complete all as specified. 132.00 Taking out of old unserviceable Arm rest of Chair Writing Black (Drg No GEB/FUR/01) and S&F new Arm rest of the same. both hand rest section to have slope towards front all as per shown in drawing complete all as specified. 133.00 Table bed side :- Taking out old unserviceable drawer handle of table bed side and S&F new U type stenless steel drawer handle 100 mm x 40 mm with necessory fitting arengement all as per shown in drawing and directed by GE. 134.00 Table 900x600mm FD -223 Taking out of old unserviceable top of table (900 x 900 x 760 mm) and S & F new top of table (900 x 900 x 760 mm) encluding 4 mm thick teak wood beading around of top. Top should be made of 18 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, all as per shown in drawing and directed by GE. 135.00 Table without drawer (900 x 600 x 760mm) (FD-223, FD-284) : Taking out of old unserviceable top of table without drawer (900 x 600 x 760) mm and S & F new top of table without drawer (900 x 600 x 760 mm) encluding 4 mm thick teak wood beading around of top. Top should be made of 18 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white all as per shown in drawing and directed by GE. 136.00 Receiptical large steel FD-1044:-Removing of old UNSV Bucket of receiptical large steel and S&F new bucket on the same place. Bucket should be made of 1 mm thick plain GI sheet. Complete all as specified per directed by GE.
