Tender For Repair Of Various Types Of Wooden Furniture Held With Ge (West) Jabalpur.; 1 Table Dining 6/8 Persons Drg No. FD-273 & FD-30 (M) 2 (a)Dismantling existing unserviceable top and providing new top table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layertype BWP grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg, and as directed by Engineer-in-Charge. 3 (b) Dismantling existing unserviceable top and providing new top table dining 6 Persons of size 1500 x 900 x 18/19mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layertype BWP grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg, and as directed by Engineer-in-Charge. 4 (c) Replacement of unserviceable legs of size 75 mm x 40 mm x 742 mm 1st Class seasoned teak wood all as specified and shown on drg, and as directed by Engineer-in-Charge. 5 (d) Replacement of unserviceable long rail made out of 1st class teak wood 25 mm thick and 100 mm wide complete all as shown on drg, and as directed by Engineer-in-Charge 6 (e) Replacement of unserviceable short rail made out of 1st class seasoned teak wood 25 mm thick and 100 mm wide complete all as shown on drg, and as directed by Engineer-in-Charge. 7 (f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 8 (g)S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. 9 Table 3 x 2 with/ without Drawer (Drg No FD-284 & FD-55) 10 (a) Dismantling existing unserviceable top and providing new top table 3x2 of size 900x600x18/19mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layertype BWP grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg, and as directed by Engineer-in-Charge. 11 (b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom complete all as per drg and as directed by Engineer-in-Charge. 12 (c )Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section all as specified and shown on drg, and as directed by Engineer-in-Charge. 13 (d )Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mmin section all as specified and shown on drg, and as directed by Engineer-in-Charge. 14 (e )Removing unservicable drawer and S & F of new drawer made of 1st class seasoned teak wood and 6 mm thick plywood BWP including chromium plated knob. Rest all as specified and shown on drg , and as directed by Engineer-in-Charge. 15 (f ) Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak wood all as specified and shown on drg, and as directed by Engineer-in-Charge. 16 (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 17 (h) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. 18 Table 3 x 3 ( Drg No FD-291) 19 (a) Dismantling existing unserviceable top and providing new top of size 900 x 900 x 18/19 mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWP grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg, and as directed by Engineer-in-Charge. 20 (b)Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood all as specified and shown on drg, and as directed by Engineer-in-Charge. 21 (c)Removing unserviceable rail and S & F of new rail made of 1st class seasoned teak wood all as specified and shown on drg, and as directed by Engineer-in-Charge. 22 (d)Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 23 (e)S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. 24 Chair Dining/ Chair Dining JCOs ORs (Drg No FD-279) & FD /MAP-II/05) 25 (a)Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning as per drg, and as directed by Engr-in-Charge. 26 (b)Replacement of unserviceable front legs made of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 27 (c)Replacement of unserviceable rear legs made of 1st class seasoned teak woodas per drg, and as directed by Engr-in-Charge. 28 (d)Replacement of unserviceable stiffenersmade of 1st class seasoned teak woodas per drg, and as directed by Engr-in-Charge. 29 (e)Replacement of unserviceable back rest made of 1st class seasoned teak woodas per drg, and as directed by Engr-in-Charge. 30 (f) Replacement of unserviceable PVC seat with new PVC seat of appropriate size all as per drg and as directed by Engr-in-Charge. 31 (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 32 Chair Writing (Drg No FD-250 & FD-280) 33 (a)Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning as per drg, and as directed by Engr-in-Charge. 34 (b)Replacement of unserviceable front legs made of 1st class seasoned teak wood as per drg. 35 (c)Replacement of unserviceable rear legs made of 1st class seasoned teak woodas per drg, and as directed by Engr-in-Charge. 36 (d)Replacement of unserviceable stiffenersmade of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 37 (e)Replacement of unservicable arm rest made of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 38 (f) Replacement of unservicable back rest made of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 39 (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 40 Chair Easy (Drg No FD-229) 41 (a)Replacement of unserviceable rail/bead for caning made of 1st class seasoned teak wood with suitable holes for caning as per drg, and as directed by Engr-in-Charge. 42 (b) Replacement of unservicable front legs with newlegs made of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 43 (c) Replacement of unservicable rear legs with newlegs made of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 44 (d) Replacement of unservicable seat frame with new of 1st class seasoned teak wood of section 75 mm x 40 mm of size 510 mm long in frontand 480mm long in rear as per drg, and as directed by Engr-in-Charge. 45 (e) Replacement of unservicable back frame with new of 1st class seasoned teak wood of section 75 mm x 40 mm of size 510 mm long in frontand 480mm long in rear as per drg, and as directed by Engr-in-Charge. 46 (f)Replacement of unservicable arm rest with new of size 65x25mmx 610mm as per drg, and as directed by Engr-in-Charge. 47 (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 48 Table Writing (Drg No FD-33, FD-249 & FD-275 ) 49 (a) Dismantling existing unserviceable top and providing new top of size 1145 x 600 x 18/19 mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layertype BWP grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg, and as directed by Engr-in-Charge. 50 (b) Replacement of unservicable legs with newlegs made of 1st class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 51 (c) Repair of drawers (replacement of ply wood 6mm) including chromium plated knobs etc complete all as specification and directed by Engr-in-Charge. 52 (d)Replacement of unservicable stiffeners with 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 53 (e) Replacement of unserviceable drawers side with new of size 600 x 500 x 18 mm pre laminated MDF board exterior BWP grade ISI marked all as per drg, and as directed by Engr-in-Charge. 54 (f) Replacement of unserviceable lock of drawers with new brass lock 6 lever 50 mm all as per drg,and as directed by Engr-in-Charge. 55 (g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 56 Table Centre (Drg No FD-274 & FD-235) 57 (a)Dismantling of unserviceable top and providing new top made of prelaminated MDF board exterior grade 18/19 mm thick BWP including 6mm thick teak wood beading all round all as specified and directed by Engr-in-Charge. 58 (b)Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 59 (c)Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 60 (d)Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 61 (e) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. 62 Teapoy Wooden (Drg No FD-278) 63 (a)Dismantling of unserviceable top and providing new top made of pre laminated MDF board exterior grade 18/19 mm thick BWP including 6 mm thick teak wood beading all round all as specified and directed by Engr-in-Charge 64 (b)Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 65 (c)Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 66 (d)Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 67 (e)S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. 68 Peg Table (Drg No FD-277) 69 (a) Dismantling of old and unserviceable top and providing new top made of pre laminated MDF board exterior grade 18/19 mm thick BWP including 6 mm thick teak wood beading all round all as specified and directed by Engr-in-Charge. 70 (b)Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood as per drg. 71 (c)Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 72 (d)Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood as per drg,and as directed by Engr-in-Charge. 73 (e)S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs and as directed by Engr-in-Charge. 74 Stool Dressing (Drg No FD-252 & FD-282) 75 (a)Replacement of broken legs with new 1st Class seasoned teak wood legs as per drg,and as directed by Engr-in-Charge. 76 (b)Replacement of broken short rails with new 1st Class seasoned teak wood short rails as per drg, and as directed by Engr-in-Charge. 77 (c )Replacement of broken longrails with new 1st Class seasoned teak wood Longrails as per drg,and as directed by Engr-in-Charge. 78 Table Bed Side (Drg No FD-276) 79 (a)Taking out unservicable top of table bed side and providing new top of Prelaminated MDF board exterior grade 18/19 mm thick BWP grade of same size and shape as shown in drg, and as directed by Engr-in-Charge. 80 (b)Taking out unservicable sides of table bed side and providing new sides of Prelaminated MDF board exterior grade 18/19 mm thick BWP gradeof same size and shape as shown in drg, and as directed by Engr-in-Charge. 81 (c)Taking out unservicable shelf of table bed side and providing new shelf of Prelaminated MDF board exterior grade 12 mm thick BWP grade of same size and shape as shown in drg,and as dierected by Engr-in-Charge. 82 (d) Taking out old ply from the back and providing new commercial ply wood 6 mm thick conforming to IS: 303 BWP grade all as specified and shown in drg and as directed by Engr-in-Charge. 83 Table 600 x 600 mm (Drg No FD-293) 84 (a) Dismantling existing unserviceable top and providing new top of size 600 x 600 x 18/19 mm made of prelaminated MDF board exterior grade in teak shade flat pressed three layer type BWP grade ISI marked and teak wood beading all round 6 mm thick shall be provieded all as specified and shown on drg,and as directed by Engr-in-Charge. 85 (b)Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood all as specified and shown on drg,and as directed by Engr-in-Charge. 86 (c)Removing unserviceable rail and S & F of new rail made of 1st class seasoned teak wood all as specified and shown on drg,and as directed by Engr-in-Charge. 87 (d)Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. 88 (e)S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs. 89 Removing old polish dust dirt etc from entire surface of wooden furniture items by specified method, filling up holes cracks and patches with specified material preparing the surfaces smooth and clean and polishing the surfaces with french polish superior quality complete all as directed by Engineer-in-Charge for following items:- 90 (a) Chair Dining/Chair Dining JCOs/ ORs (Drg No FD 279) & FD/MAP-II/05 91 (b) Chair Easy (Drg No FD-229) 92 (c) Chair writing (CB) (Drg No FD-280) 93 (d)Book case open small (Drg No FD-237) 94 (e) Bin soiled linen (Drg No FD-212) 95 (f) Stool dressing. (Drg No FD-27 ) 96 (g)Table bed side. (Drg No FD-248) 97 (h)Teapoy. (Drg No FD-34) 98 (i) Table dining 6/8 persons. (Drg No - FD30 & FD-237) 99 (j) Table 3 x 3. (Drg No FD-291) 100 (k)Peg table. (Drg No FD-277) 101 (l)Table 3 x 2 with drawer(Drg No FD-283) 102 (m) Table 3 x 2with out drawer. (Drg No FD-41) 103 (n) Locker Bed side. (Drg No FD-4074) 104 (o)Table office officer (Drg No FD-4119) 105 (p) Almirah large wooden with shelves & 1/2 H 1/2 S (Drg No FD-4016) 106 (q) Almirah wooden medium/ small with shelves & 1/2 H, 1/2 S (Drg No DB-3959) 107 (r)Table writing(Drg No FD-275) 108 (s)Table centre(Drg No FD-274) 109 (t)Book Shelves Open Large (Drg No FD-69) 110 (u)Book Shelves Open Small (Drg No DB-2281) 111 (v) Hat Stand with mirror (Drg No FD-233) 112 (w)Rack Side 3/4 Spaces (Drg No FD-96) 113 (x)Table 4-6 x 1-8 (Drg No F-63) 114 (y) Table 5 x 2-10 (Drg No F-91) 115 (z)Table 600x600x760mm (Drg No FD-293) 116 (aa) Table dressing gents(Drg No FD-230) 117 (ab)Table dressing ladies (Drg No FD-251, FD-378 &DB-1980) 118 Table dressing Ladies With Mirror (Drg No (FD-251, FD-378 & DB-1980) 119 (a)Taking out existing old faded looking mirror of size 1200 x 380 x 5 mm thick with frame and providing new looking mirror of same size and shapeduly framed with teak wood and replacement of ply wood back with new commercial 6 mm thick plywood conforming to IS: 303 BWP grade on the back of mirror. 120 (b)Taking out unserviceable drawer plywood, knob and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWP grade and MS CP knobas shown on drawing,and as directed by Engr-in-Charge. 121 (c)Replacement of unserviceable top and providing new top of prelaminated MDF board exterior grade in teak shade flat pressed three layertype BWP grade as per the size and shape as shown on drg,and as directed by Engr-in-Charge. 122 (d)Replacement of unserviceable bottom and providing new bottom made of prelaminated MDF board exterior grade 18/19 mm thick BWP of the same shape and size complete all as specified and shown on drg,and as directed by Engr-in-Charge. 123 Chairs All Type (Drg NoDB-3922, DB-2799, FD-15, FD-17, FD-20, FD-27, FD-228, FD-229, FD-279, FD-280 & FD-282) 124 Removing existing cane from chairs/couches/ stool dressing CB/Bin soiled linen, etc (back & seat) and weaving with and including new cane 2 mm wide half round and 4 mm wide on borderscomplete all as directed by Engr-in-Charge. 125 Chair Revolving / Chair Visitor (Drg No TP) 126 (a) Taking out unserviceablecasters wheel from chair,Revolving and S & F new caster wheels of approvedmake as per sample in Chair Revolving. 127 (b) Taking down Unserviceable foot of Chair Revolving, S&F new chromium platedheavy duty Iron foot including 5 Nos casters wheels of approved make as per sample of appropriate size as directed by Engr-in-Charge in chair Revolving/ Chair Executive. 128 (c) Taking down Unserviceable handrest from Chair Revolving/ Chair Visitor, S& F new handrest of appropriate size as directed by Engr-in-charge. 129 (d) Taking down Unserviceable hydrolic jack from Chair Revolving, S&F new hydrolic jack of approved sample of appropriate size as directed by Engr-in-charge. 130 (e) Taking down Unserviceable tapestry cloth from seat of Chair Revolving/Chair Visitor, S&F new tapestry cloth of approved quality as per sample which should not be less than Rs 275/- per metreto the seat of the Chair Revolving/ Chair Visitor. 131 (f) Taking down Unserviceable tapestry cloth from back of Chair Revolving/Chair Visitor, S&F new tapestry cloth of approvedquality as per sample which should not be less than Rs 275/- per metreto the back of the Chair Revolving/Chair Visitor. 132 Chair Dining Officer (Drg NoFD MAP-II/04) 133 (a) Opening and taking out old unserviceable cushion cover 440X410X75mm and supply & fixing new cushion cover made out of approved tapestry cloth not less than Rs.275/- per meter as approved by GE duly stitched with fine standard thread and providing best quality chain with runner on one side ,and as directed by Engr-in-Charge. 134 (b)Taking out old unserviceable cushion foam440X410X75mm and supply new cushion foam sheet on/MM Foam32 density as directed by Engr-in-Charge. 135 (c)Replacement of unserviceable front legs made of 1st class seasoned teak wood as per drg, and as directed by Engr-in-Charge. 136 (d)Replacement of unserviceable rear legs made of 1st class seasoned teak woodas per drg, and as directed by Engr-in-Charge. 137 (e)Replacement of unserviceable stiffenersmade of 1st class seasoned teak woodas per drg, and as directed by Engr-in-Charge.
