Tender For Repair, Maintenance And Painting Of Steel Furniture Items At Af Stn Naliya Under Ge(Af) Naliya.; 1 CHARPOY GI PIPE WITH PLYWOOD TOP (DRAWING NUMBER FD-220) : Supply and fix in replacement of following new members and tightening including removal/retrieval of unserviceable parts of charpoy GI pipe complete all as shown on darawing and as directed. Note:- Pipes obtained from dismantling shall be cut to size, reused and paid separately under relevent items of this schedule/BOQ. 2 Long rail of charpoy GI Pipe, 32mm diamedium grade, ISI Marked. 3 32mm bore, 3 way Elbow, ISI Marked. 4 32mm Bore Checknuts. 5 Labour only for provision of short rail of charpoy by cutting, threading old pipe obtained from dismantling of serial Item number 1.01 above and fixed to the charpoy complete all as shown on drawing and as directed. 6 Labour only for provision of leg of charpoy by cutting, threading the old pipe obtained from dismantling of serial Item number 1.01 above and fixed to the charpoy complete all as shown on drawing and as directed. 7 Ply wood of 12mm thick BWR grade, commercial (ISI marked) on the top including tighting of loose checknut, elbow, long rail, short rail, legs with nut & bolt complete all as per existing and as directed. 8 Flat iron of size 40x6x900mm for stiffner to charpoy GI pipe welded both ends complete all as shown on drawing and as directed. 9 ALMIRAH LARGE / MED / SMALL STEEL (DRAWING NUMBER FD-1031 & 1032) Supply and fix new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing including removal of old and unserviceable parts / components complete all as shown on drawing and as directed. 10 Mild steel lock 6 livers best quality with brass livers & duplicate key. 11 Mild steel chromium plated handle 125 mm size. 12 Three way locking assembly with iron plate and two rods 10 mm dia and lock cover. 13 Leg made out of 1.00 mm thick mild steel plane black sheet, including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine. 14 CHAIR VERANDAH (DRAWING NUMBER FD/E6/MAP-II/ 15, 6) 15 Supply and fix in repairs, 4.0 mm thick PVC seat for Chair Varandha inlcuding removal of unserviceable/ broken PVC seat complete all as shown on drawing and all as directed. 16 Supply and fix in repairs, 4.0 mm thick PVC back of Chair Varandha including removal of unserviceable/ broken PVC back complete all as shown on drawing and all as directed. 17 Repair to chair varandha by welding the defective frames of the chair where necessary and scribe the tube body with emery paper and painting the same with two coats of white synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 18 Supply and fix in repairs, hard rubber shoe to chair varanadah complete all as specified and directed. 19 TEAPOY VERANDAH (DRAWING NUMBER FD-255) 20 Supply and fix in repairs, 19 mm thick pre laminated partical board, exterior grade (ISI marked), teak face one side and other side balancing white with PVC/Wooden beading, 1.5mm thick all around of table top including removing unserviceable top complete all as per drawing and as directed. 21 Material and labour for preparation of all surface of tubular steel body with emery paper and dusting/cleaning the tube after necessary welding / joining work and painting with two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified and directed. 22 LOCKER STEEL (DRAWING NUMBER FD-257) 23 Supply and fix in repairs, chromium plated MS hasp and staples 75mm long (ISI marked) including removal of unserviceable hasp and staples complete all as shown on drawing and as directed. 24 Supply and fix in repairs, chromium plated MS handle 100mm long cast type including removal ofunserviceable handles complete all as shown drawing and as directed. 25 Supply and fix in repairs, shelves with 1mm thick mild steel sheet duly painted with two coats of synthetic enamel paint over a coat of red exide primer including necessary fixing accessories including removal of unserviceable shelf complete all as per drawing and as directed. 26 CHAIR VERANDAH (DRAWING NUMBER FD-256/ 359) 27 Recanning of seat of Chair Verandah with 4mm thick plastic cane including removal of unserviceable can complete all as specified and as directed. Note :- Pattern of recanning shall be as shown on drwaing. 28 Recanning of back of Chair Verandah with 4mm thick plastic cane including removal of unserviceable complete all as specified and directed. Note :- Pattern of recanning shall be as shown on drwaing. 29 Removing unserviceable cane and scraping the tube body of chair verandah with emery paper and dusting / cleaning the tube after necessary welding / joining work and painting with two coats with synthetic enamel white paint over a coat of red oxide primer complete all as specified and directed. 30 Supply and fix in repairs, hard rubber shoe to chair varanadah complete all as specified and directed. 31 TABLE OFFICE STEEL (OFFICER) (DRAWING NUMBER FD-84M & 1003) 32 Supply and fix in repairs, 19mm thick, pre laminated partical board, exterior grade, teak face, (ISI Marked) one side and other balancing white with PVC/Wooden beading best quality 1.5mm thick all round of table top including removal of unserviceable table top complete all as shown on drawing and as directed. 33 Supply and fix in repairs drawer inlcuding denting / cleaning / dusting / greasing the same for smooth functioning after removal of old unserviceable drawer complete all as shown on drawing and as directed. 34 Supply and fix in repairs, MS lock 4 lever 75mm with duplicate keys (ISI Marked) including removal of old unsrveceable lock of drawer complete all as shown on drawing and as directed. 35 Supply and fix in repairs, hard rubber shoe all as shown on drawing and as directed. 36 TABLE OFFICESTEEL (CLERK)(DRAWING NUMBER FD-84M & 1002) 37 Supply and fix in repairs, 19mm thick, pre laminated partical board, exterior grade, teak face, (ISI Marked) one side and other balancing white with PVC/Wooden beading best quality 1.5mm thick all round of table top including removal of unserviceable table top complete all as shown on drawing and as directed. 38 Supply and fix in repairs drawer inlcuding denting / cleaning / dusting / greasing the same for smooth functioning after removal of old unserviceable drawer complete all as shown on drawing and as directed. 39 Supply and fix in repairs, mild steel lock, 4 lever, 75mm size with duplicate keys (ISI Marked) for drawer including removal of unsrveceable lock complete all as shown on drawing and as directed. 40 Supply and fix in repairs, hard rubber shoe complete all as specified and directed. 41 TABLE STEEL OF SIZE 900x900x760mm(DRAWING NUMBER FD-1009) 42 Supply and fix in repairs, 19mm thick, pre laminated partical board, exterior grade, teak face (ISI Marked), one side and other balancing white with PVC/Wooden beading best quality 1.5mm thick all round of table top including removal of unserviceable table top complete all as shown on drawing and as directed. 43 TABLE STEEL 900x600x760mm (DRAWING NUMBERFD-1007) 44 Supply and fix in repairs,19mm thick, pre laminated partical board, exterior grade, teak face (ISI Marked) one side and other balancing white with PVC/Wooden beading best quality 1.5mm thick all round of table top including removal of unserviceable table top complete all as shown on drawing and as directed. 45 CHAIR REVOLVING (LOW/MEDIUM/HIGH & EXECUTIVE) 46 Supply and fix in repairs, foam cushion 75 mm thick, 40 kg/cubic metre density with tapestry including removal of existing old foam & tapestry of seat complete all as shown on drawing and as directed. 47 All as per serial item number 11.01 here-in-before but back of chair revolving. 48 All as per serial item number 11.01 here-in-before but arm of chair revolving. 49 Supply and fix in repairs, caster wheel including removal of the existing unservicabale casteor wheel complete all as specified and directed. 50 Supply and fix in repairs, lever system (hydraulic) for adjustment of height including all necessary fittings after removal of old unserviceable lever system complete all as specified and directed. 51 Supply and fix in repairs, complete plate base stand assembly including all necessary fittings after removal of old unserviceable plate base stand assembly complete all as specified and directed. 52 CHAIR SCHOOL WITH HAND BOARD (DRAWING NUMBER FD-E6/MAP/05) 53 Supply and fix in repairs, hand board made out 19 mm thick pre laminated partical board, exterior grade, (ISI marked) teak face one side and other side balancing white with 4mm teakwood edging including removal of old unseriviceable hand board complete all as shown in drawing and as directed. 54 CHAIR VERANDAH BLACK (DRAWING NUMBER FD-E6/MAP/II) 55 Supply and fix in repairs, flat Iron 65x4x410mm and welded on both side complete as shown on drawing and as directed. 56 BED HARD STEEL (DRAWING NUMBER FD/E6/MAP/08) 57 Supply and fix in repairs, 18 mm thick pre laminated particle board exterior grade both side laminated teak face shade for Head Side Board including 1 mm thick PVC edging all around including removing old unserviceable particle board and complete all shown in drawing and as directed. 58 Supply and fix in repairs, 18 mm thick pre laminated particle board exterior grade both side laminated teak face shade for Foot Side Board including 1 mm thick PVC edging all around including removing old unserviceable particle board and complete all shown in drawing and as directed. 59 Supply and fix in repairs, top made out of 12 mm thick plywood, BWR grade quality approved in single piece as per drg without any joint ,fixing to the bed frame with suitable screw wood / steel including old unserviceable plywood complete all as shown in drawing and as directed. 60 CHARPOY IP HARD TOP (DRAWING NUMBER FD/MAP-II/01) 61 Supply and fix in repairs, top made out of 12 mm thick plywood, BWR grade quality approved in single piece as per drg without any joint ,fixing to the bed frame with suitable screw wood / steel including old unserviceable plywood complete all as shown in drawing and as directed. 62 TABLE DINING ORs (DRAWING NUMBER FD-165 (M) 63 Supply and fix in repairs, top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side with PVC/Wooden beading all around including removal of old unserviceable top complete all as shown in drawing and as directed. 64 Material and labour for preparation of old painted surfaces appying sand paper and filling with putty where ever required and apply one coat of black synthetic enamel paint complete all as specified and directed. 65 Supply and fix in repairs, legs made out of 25 mm MS square tube, 1.6 mm thick, size and shape as shown on drawing including removal of old unservicable legs. 66 Supply and fix in repairs, hard rubber shoe of superior quality completed as approved and all as shown on drawings and as directed. 67 TABLE COMPUTER (DRAWING NUMBER FD/E6/MAP/03) 68 Supply and fix in repairs, top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC/Wooden beading all around including including removal of old unserviceable top complete all as shown in drawing and as directed. 69 Material and labour for drawer made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC/Wooden beading all aroundas per manufacturers instructions and other side French polishing with 02 NosTelescopic Channel of best qualityas approved by GE/Engineer-in-Charge including removal old unserviceable drawer complete all as shown in drawing and as directed. 70 All as per serial item number 17.02 here-in-before but for Pull Out Tray. 71 All as per serial item number 17.02 here-in-before but for Key Board. 72 Table BED SIDE (MAP) (FD/E6/MAP/15®) 73 Supply and fix in repairs, top along with the side portion made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around including removal of old unserviceabale top complete all as shown in drawing and as directed. 74 Material and labour for drawer made out of 12 mm thick, commercial BWR plywood of three sides with front portion of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC/Wooden beading all around complete all as shown in drawing and as directed. 75 Supply and fix in repairs, 6 mm thick commercial face plywood for back complete all as shown in drawing and as directed. 76 Supply and fix in repairs, Handles complete all as shown in drawing and as directed. 77 Material and labour for spot welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of welding 6 mm, including scraping preparing surface of welded portion by grinding and buffing to match with existing complete all as specified and directed. 78 Material and labour for preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of puttywherever necessary andapply one coat of synthetic enamel paintwith spray gun as per existing colour complete all as specified and directed. 79 Almirah med steel (Drawing Number - FD243 /1032) 80 Almirah large steel (Drawing Number - FD 67/1031) 81 Table Bed Side (MAP) (Drawing Number-FD/E6/MAP/15®) 82 Table Dining ORs (Drawing Number- FD-165 (M) 83 Rack 6 tier steel(Drawing Number - FD-1038) 84 Rack Shoe Steel (Drawing Number - FD E6 MAP 02) 85 Steel Shelving Small (Drawing Number - FD E6 MAP 18) 86 Steel Shelving large (Drawing Number - FD E6 MAP 19) 87 Table office officers steel (Drawing Number- FD 84 M,1003) 88 Table office clerksteel (Drawing Number - FD 84 M,1004) 89 Table 900 x 900 x 760 Steel (Drawing Number - FD-1009) 90 Teapoy verandah(Drawing Number - FD 35 / 255 / 383) 91 Bed hard steel(Drawing Number - FD / E6 / MAP / 8 (R)) 92 Charpoy IP with hard top (Drawing Number - FD /MAP- II /01) 93 Chair School Hand Board (Drawing Number - FD / E6 / MAP / 05) 94 Locker Bed Side” (Drawing Number - FD - 1029) 95 Chair varandah Steel (Drawing Number-FD/E6/MAP/)
