Tender For Repair/ Replacement Of Wiring, Lights And Misc Items And Fixture Of Cod Agra Under Ge (West) Agra.; 1.00 Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials to MES stores for segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge. 2.00 M&L for point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC insualted and unsheathed FRLS cable 2.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. (Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.) 3.00 All as above item No-2 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by one 1one way switch on independent board but not below the switch board of light points complete all as specified & directed. 4.00 All as per item No-2 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by 1 one way on the same board with other switches complete all as specified & directed. 5.00 All as per item No-2 here in before but point wiring for one six pin socket outlet 15 & 5 amps (independent) controlled by one modular switch using PVC FRLS cable of size 2.5 sqmm complete all as specified & directed. NOTE-For item Nos 2 to 5 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick wall/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC beams/ coloumns /ceilings etc shall be in surface steel conduit of suitable size fixed on surface with using PVC rawl plug. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade) 6.00 Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed. 7.00 Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed. 8.00 Supply and fix switch piano, flush type, single pole, 20 Amps one way, 230 volts complete all as specified and directed. 9.00 Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed. 10.00 S&F switch, bell push button, single pole, 5/6 Amps, one way, 230 Volts complete all as specified and directed. 11.00 M&L for point wiring concealed type with 1.50 sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 2.5 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, to be terminated in and excluding modular metal GI flush box and its cover plates for fixing modular type switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed. 12.00 All as per item No-11 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the same board with other switches complete all as specified & directed. 13.00 All as per item No-11 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed. 14.00 All as per item No-11 here in before but point wiring for one six pin socket outlet 16 &6 amps (independent) controlled by one modular switch using PVC FRLS cable of size 2.5 sqmm complete all as specified & directed. 15.00 Supply and fixing modular metal GI flush box 1/2 module as per site requirement suitable for 20mm dia conduit with and fixed on walls in CM 1:4 and making good the disturbed surfaces of walls as per existing complete all as specified and directed. 16.00 Supply and fixing modular metal GI flush box modular metal flush box of 3 module complete all as specified and directed. 17.00 Supply and fixing modular metal GI flush box modular metal flush box of 6/8 module complete all as specified and directed. 18.00 Supply and fix modular white cover plate with frame 1 module for mounting modular switches,sockets and regulators etc complete all as specified and directed. 19.00 Supply and fix modular white cover plate with frame 3 module complete all as specified and directed. 20.00 Supply and fix modular white cover plate with frame 6 module complete all as specified and directed. 21.00 Supply and fix modular white cover plate with frame 8 module complete all as specified and directed. 22.00 Supply and fix switch modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed. 23.00 Supply and fix bell push modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed. 24.00 Supply and fix socket outlet, 6 Amps, modular type, 2 module 230 volts complete all as specified and directed. 25.00 Supply and fix switch modular type, single pole, 16 Amps one module,one way 230 volts complete all as specified and directed. 26.00 Supply and fix socket outlet, 6/16 Amps, modular type, 2 module 230 volts complete all as specified and directed. 27.00 Supply & fix rotory stepped type electronic fan regulator modular type,Single module 120 watt 230 Volts complete all as specified & directed. 28.00 Supply and fixing in repair Buzzer,Dingdong AC 230 volts, single pole 29.00 Supply and fix lamp holder with LED Bulb insulated body with back plate for batten fitting complete all as specified and directed. 30.00 Supply and fix in repair LED Bulb rechargable type of 15 watt all as directed by Engr-in-Charge 31.00 Supply and fixing in repair LED lights fitting rechargable type 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 32.00 Supply and fixing in repair LED lights fitting (Trio Colour) 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 33.00 S & F in repair LED light fitting 1x 11W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. 34.00 Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including fixing arrangment at wall/pole all as directed. 35.00 Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. 36.00 Wiring for circuit/submain wiring alongwith earth wire with 2x4.0 sq. mm + 1x2.5 sq. mm earth wire of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required 37.00 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. 38.00 S&F in replacement rugged LED midbay/highway LED light fittings of capacity 100 Watts, 13000 lm with black colour, powder coated aluminum heta sink for efficent heat dissipation and high purity anodized refelector with electro chemically anodised matt finish inside, the effective glass optics for maximum illumination radious of aluminium reflector not less than 240 mm dia of outer peripherals. Driver and accessories prewired power consumption less then 100 W, with luminaire lumen 13000lm, colour temprature not less than 6600k, ingress protection IP-65 teh high lumen output minimum 130lm/Watts including 3 core flexible copper conductor cord of size 0.75 Sqmm from ceiling rose to light connector complete all as specfied and directed. 39.00 Supply & fix in replacement rugged LED midbay/highway LED light fittings of capacity 80 Watts, powder coated aluminum heat sink for efficent heat dissipation and high purity anodized refelector with electro chemically anodised matt finish inside, the effective glass optics for maximum illumination radious of aluminium reflector not less than 240 mm dia of outer peripherals. Driver and accessories prewired power consumption not less then 80 W, with luminaire lumen >8000 lm, colour temprature not less than 6600k, ingress protection IP-65 teh high lumen output minimum 130lm/Watts including 3 core flexible copper conductor cord of size 0.75 Sqmm from ceiling rose to light connector complete all as specfied and directed. Note for item No. 38 & 39 :- The work ref to be carried out in hangers at the height 12 to 15 Mtrs. therefor units rate quoteds by the contractor should be including of required necessary TNP. 40.00 Supply & fix in replacement, surface/ recased 2 ft x 1 ft mounting type 28 watt LED luminaire flat panel with high brightness with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. 41.00 Supply & fix, surface square mounting type 12 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. 42.00 Supply & fix in replacement, LED garden light (Bollard) with aluminium pipe housing withg glare free mushroom shaped PMMA diffiuser 15 W LED luminaire light fitting, IP 65 protection, H=600mm (Available with H=800mm & 1000 mm) with fixing accessories and connecting up with & including twin twisted 3 core flexible copper conductor cord of size 0.75 Sqmm connecting from Main DBs or nearest light point complete all as specfied and directed. 43.00 M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25x4 mm galvanised iron or steel strip. 44.00 S&F in replacement of Air termination, single pointed rod 25mm dia and 1800mm long of GI on Hanger roof at height upto 11 mtr with necessary arrengment for fixing on roof with insulating material of minimum 6 mm thick PVC insulation between roof structure amd air termination point including necssary screws, nuts, bolts & washer of GI with suitable size base plate to fixed in a manner to insure non conductivity with bldg structure complete all as directed and specified Note:- Rate for required T&P, Ladders/ Lifter & necessary safety equipment deemand to be included to the qoated rate. 45.00 S&F in replacement of GI strip 32x6 mm with saddles/insulators and fixing screws not less than 50 mm long with PVC plug & gutties etc. for roof conductors and down conductors above ground on Hanger at height upto 11 mtr all as directed and specified. 46.00 S&F in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled screwed including 3 Nos, 8mm dia, 25mm long hex head screw all as directed and specified. 48.00 Refixing of hanging Aluminium/GI strip on same location with saddles/insulators, screws not less than 50 mm long with PVC plug & gutties etc. for roof conductors and down conductors on Hanger at height upto 11 mtr all as specified and directed 49.00 Supply and fixing GI Pipe 40mm Light grade , for Earth strip protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed at site,. 50.00 Supply and fin in repair 100 watt outdoor LED Flood Light luminaire comprise of die cast aluminium housind powder coated and toghen flass wide angle Beam (Cool day light 6500k) 51.00 Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps. 52.00 Supply and fixing in repair Distribution board of 08 Way with 200 amps rated bus bar sheet Metal enclosure double door all as directed by Engr-in-Charge. 53.00 Supply and fixing in repair Distribution board of 12 Way Vertical Triple pole and neutral sheet Metal enclosure double door suitable upto 250 Amps MCCB as incomer all as directed by Engr-in-Charge. 54.00 Supply and fix MCCB 4 Pole, 415 V, fixed type, 100 to 160 Amps with breaking capacity 16 KA 55.00 Supply and fixing in repair MCB SPN/RCCB 40 to 63 amp rating 240V, 10KA C. 56.00 Supply and fixing in repair MCB/RCCB SP 5 to 32 amp rating 240V, 10KA C. 57.00 Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB 58.00 Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the 4 mm GI wire by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009Part-I and connecting to CBDB’s as specified or indicated including testing on completion .
