Tender For Pipeline Extension Work In The Degree College Road In Tauriyapura Ward No. 8 In Kulpahar Nagar Panchayat. - Excavation In Foundation In Ordinary Soil ( Loam Clay Or Sand) Including Lift Up To 1.5 Meter (5Ft) And Lead Upto 30M (100Ft) And Includ, kulpahar-Uttar Pradesh

Tender For Pipeline Extension Work In The Degree College Road In Tauriyapura Ward No. 8 In Kulpahar Nagar Panchayat. - Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. (as per S.I. No. 251) 2 Sand/Dust filling in plinth including supply of necessary quantity of coarse sand from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work (as per S.I. No. 255) 3 Cement Concrete with 40 mm gauge stone ballast sand of 1.25 FM and cement in proportion of 1:6:12 in making sub base of C.C. road in 7.5 cm/ 10 cm. compacted thickness in foundation and under floors, including supply of all material, labour and T&P etc. required for proper completion of the work. . (as per S.I. No. 273) 4 RCC work with cementapproved coarse sand and 2cm. (3/4) gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost.As in item (283) above but in RCCcolumns in1.1.5.3 (SI No.289) 5 RCC work with cementapproved coarse sand and 2cm. (3/4) gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost.As in item (283) above but in RCC T-beam and slab roof in1.1.5.3 (SI No.288) 6 Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. 7 Mild steel or iron work in heavy sizes such as trusses built up gates doors frames records racks roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also including supply of steel, bolts nut wasrage etc. and their fixing required for proper completion of the work in new item.503 8 Class-150 brick work in 1:4cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work.(as per S.I. No. 305) 9 12mm15 mm thick plaster As in item (580) above but with cement and fine sand of fineness modulus mortar in 1:4.(item 584) 10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.13.8 11 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).13.47.1 12 Painting roof or other iron work in large areas with one coat priming and one coat of approved (above one sq. meter) paint (British antisol or equivalent) including supply of all materials, labour and tools and plants etc. required for proper completon of the work the ISI no. 103-1950.item 644 13 Providing and fixing G.I Pipe completewith G.I Fittingsincluding trenching and refilling etc.18.12.5 14 Providing and fixing chlorinated cpvc pipes having thermal stabilityfor hot & cold water supplyand all cpvc brass threaded fittings including fixing the Pipe fittingswith one step cpvc solvent complete ,testingas per direction of engineer in chargs.18.7.4 (32MM) 15 Providing and fixing chlorinated cpvc pipes having thermal stabilityfor hot & cold water supplyand all cpvc brass threaded fittings including fixing the Pipe fittingswith one step cpvc solvent complete ,testingas per direction of engineer in chargs.18.7.4 (15MM) 16 Brass bib cock heavy quality (Gem Mikado/Encesss williams or eqv.) 15mm dia 400gm 17 Boring/Drilling bore well of required dia for casing starainer pipe by suitable prescribedin IS:2800(part) including collecting samples from different srata.preparing and submittingstrata chart/bore log.including hire & running changes of all equipment toolsplants & machinery requiredfor thejob all complete as per direction of engineer in chargs,up to 90 metre depth below ground levels .23.1.1.2 18 Supplying assembling loweringandfixingin verticalspositionin bore well unplasticized PVC medium well screenpips with ribs confirmingto IS:12818 includingof all equipment toolsplants & machinery requiredfor thejob all complete as per direction of engineer in chargs.23.4.2 19 Supplying fillingsspreading& leveling gravels of size 5mm to 10 mm in the recharge pit over the existing layerof bolders in requerd thinkfor all leads & lifts all complete as per direction engineerin charges 20 Development of tube well in accordance with IS Part 1 and to estsblish maximum rate of usable water yield without sand content with required capacity air compressor running ,and V notch mathod.collected samples mathod and gettingliborty testing .labour changes .tools including .all complete as per direction engineerin charges 21 S/F of low density polythene seamless one piec moulded tankand placingthe same inproper position including all taxes labourand placing the same in proper position including all taxes labour and T&Petc for proper completion of the work.Tankshould be ISIMarked (for 5000 litre) complete S.I NO. New Item-1 22 Supply and assembling 1.5 HP Submersible pump.all t&p fittingetc all complete 23 Supply and assembling Electricity cable, Stater,all t&p etc all and covering box complete . 24 Supply & fixing of sign bord size 4x3 etc required for proper completion of the work

INR 1062 /-

Refer document