Improvement Work At Ganapathy Nagar Park In Ward No 1. In Villupuram Municipality- 1 Earth work excavation with initial lead of 10m and lift of 2m for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil,wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may bedirectedexceptinhardrockrequiring blastinginclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Narrow Foundations 2 Earth work excavation with initial lead of 10m and lift of 2m for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil,wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may bedirectedexceptinhardrockrequiring blastinginclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Open Earth Work Excavation(First 2m Depth) 3 Supply and filling in foundation with Filling Stone dust in each layer of not more than 15cm thick well water rammed to consolidation including cost and conveyance of Stone Dust to site incluidng labour charges for water and compacting etc., complete as per standard specificataion 4 Plain Cement Concrete 1:4:8 (one cement, four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site, and labour and all incidential charges such as water providing etc., complete as per standard specification 5 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam 6 Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such asrectangular or square RCC columns, etc. 7 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -Upto Basement 8 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - Ground Floor 9 Supply and fabrication of M.S or RTS (Fe 415)steel required for all RCC items of works involved in the schedule, cost of steel and binding wire at site , labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification 10 Brick work in CM 1:5 (one cement & five sand) using IIclass ground moulded bricks of size 9X43/8X 2 3/4 including cost and conveyance of all materials and all labour charges for finishing and curing, etc., complete complying with standard specification Upto Basement (Ground floor) 11 Plastering in cement mortar 1:5 mix (one cement & five sand) with12 mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications. 12 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 13 Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m 14 Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost and conveyanceof all materials etc.,complete, in all floors. 15 Plain Cement concrte 1:2:4 mix ( one cement, two sand and four aggregate ) including the cost and conveyance of all materials and excluding the cost of steel and including thelabour charges for mixing, laying of concrete and curing etc complete as per the standard specifications. 16 Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH 17 Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 18 Drilling of 150 mm dia vertical bore wellin hard rock area includingdrillingcharges and including injectionof casing pipein the drilledhole etc complete (Page No:219) 19 Supply and delivery of 150 mm dia PVC causing pipe6KSC/CM2 including cost of pipe ea complete 20 Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete(165 mm/168 mm dia PVC Casing pipes Assembly) 21 Supply and delivery of Wet type Submergible including all labour charges etc., complete., Submergible Motor 15 lpmx 80m.head 1 H.P (Page No:96) 22 Supply of 32mm PVC Pipes specially made fordeep borewell Submersible motor erection (ISI Make)including all cost materials, conveyance labours etc., complete as directed by departmental officers. 23 Cost and supply of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:118) 24 Cost and supply ofNylon rope including cost and conveyance of materials etc., complete 25 Cost and supply of 32mm GI pipeinculding cost and conveyance of materials etc., complete (Page No:36) 26 Cost and supply of 32mm GI Couplinginculding cost and conveyance of materials etc., complete (Page No:40) 27 Cost and supply of 32mm GI Union inculding cost and conveyance of materials etc., complete (Page No:40) 28 Cost and supply of 32mm GI Gatevalve inculding cost and conveyance of materials etc., complete (Page No:43) 29 Cost and supply of 32mm GI Elbow inculding cost and conveyance of materials etc., complete 30 Cost and supply of 32mm GI Tee inculding cost and conveyance of materials etc., complete 31 Cost and supply of 32mm PVC Ball Valve. inculding cost and conveyance of materials etc., complete 32 Cost and supply of Brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type). As per PWD schedule rates pg.no 158 33 Cost and supply of 40mm Clamp Set including cost and conveyance of materials cost etc., complete (Page No:42) 34 Cost and supply of 160 mm pvc end cap including cost and conveyance of materials cost etc., complete 35 Cost and supply of Panel Boardincluding cost and conveyance of materials cost etc., complete 36 Labour charges for Errection of submergible Pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth values Errection clamps pressure gauges up to the exterior wall of pump room and errction of panel board consisting of TPICN switches starter volmeter ammeter three pilot indicator lamps complete and testing the pump set and trail run for 10 days up to 5 HP.(Page No:226) 37 OVER HEAD MAINS;Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 38 Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1 x 1/8 Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-125 39 Supplying and fixing of Double Swing of height 2.40m height with 40mm diaM.S. pipes support as legs and top bar is 50mm dia.The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixingetc, complete as directed by the departmental officers. (LR) 40 Supplying and fixing of four seater SeeSaw to a height of 0.50m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixingetc, complete as directed by the departmental officers. (LR) 41 Supplying and fixing of Slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. PipeThe cost shall inclusive of all materials, labours and fixingetc, complete as directed by the departmental officers. (LR) 42 Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. PipeThe cost shall inclusive of all materials, labours and fixingetc, complete as directed by the departmental officers. (LR) 43 Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.etc, complete as per standard specifications SD 54(250) 44 GI STEEL TUBULAR POLE FOR STREET LIGHT 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 4000mm Length 45 GI STEEL TUBULAR POLE FOR STREET LIGHT 4 Metre Length Double Bracket Pole with Base Plate (250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 4000mm Length as per TWAD sor page 201. 46 Supply and fixing of 30W LED White Street Light Fittings with casting Water proof doom and low voltage power savings with long time high solution luminance, IP66 Led Safe® optical compartment, a separate IP66 control gear compartment, an extruded aluminium painted housing, a toughened glass protector,permaently sealed with a robotically dispensed silicone sealant, closed at one end by an end cover and the other end by a frame and door assembly (to access control gear) both made of injection moulded polycarbonate, a removable control gear plate, safety plug and socket system, high pressure die cast aluminium painted mounting spigot suitable for horizontal mounting (Ø32-42mm) with tilt flexibility of ± 10 degrees, with lensoFlex2® technology,PMMA lenses with wide photometry for increased pole spacing,50,000 hours =L70,Ta = 55º,surge protection of 10Kv ( in differential and common mode),Power factor ≥0.90,colour rendering index≥65 and neutral white light (4,100ºK.) with necessary clamps, brackets and accessories etc complete 47 Earthing as per PWD standard specification with on earth electrode of 2m class B pipe of dia not less than 32mm complete. Brass cable event for suitable armoured LTUG cable with earth connection suitable of 4 X 16sqmm etc complete 48 Supply and fixing of 20lit capacity tilting type stainless steel garbage bins in park area as per the site condition and as directed by the departmental officers. 49 Supply and fixing of neccesary flower plants of 2 feet to 4 feet height including cost and conveyence of plants and fixing charges for neccesary earth work and manure and watering and maintanence the plants to 30 days and handed over to departments. 50 Neem tree 51 Pungai tree 52 Puvarsan 53 Providing Double Seater arrangements with Granite Slabs over the 100mm thick Precast Slab with 230mm thick, 600mm height side walls and Plastered with C.M. 1:5, 12mm thick, white washing two coats. The cost shall include all labour and materials and as directed by the departmental officers. (LR) 54 GST. 18%(CGST-9%,SGST-9%)
