Tender For Toilet, Cabin And Fall Ceiling Work In Treasury In Distt Muzaffarnagar. - (a)Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) As per SI No. 251 (a) 2 Cement Concrete with 4 cm gauge approved quary in proportions of 8:4:1stone Ballast, Coarse sand and cement. including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. As per SI No. 281 3 (B) M-150 Brick Work in in 1:4 (One cement & four Corse sand) mortarin foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the workAs per SI No. 305(a) 4 2 cm thick Damp Proof Course with Cement and approved coarse sand 1:2 with and including water proofing compound (1 Ltr. to 1 bag of cement of 50 Kg.) as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. 2.5 cm thick and of cement concrete consisting of 1part cement, 1½ parts approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer incharge in the proportion as specified by the manufacturer. As per SI No. 361 5 (a) Sand filling in plinth and under floor including supply ofnecessary quantity of sand from a distance not exceeding 8 Kms. fromthe site of work and including watering, dressing etc. labour and T&P etc. required forproper complition of the work.saplings of girth upto 30 cms. measured at a height of 1 M. above ground leveland removal of rubbish upto a distance of 50 M. out side the periphery of areacleared. including cost of sand. As per SI No. 255(a) 6 M-150 Brick Work in in 1:4 (One cement & four Corse sand) mortar in Super Structure including supply of all materials labour, Tools & plants etc. required for proper completion of the work but in superstructure including necessary Cutting. 7 R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of for slabs in 1:1.5:3. inlintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work includingcost of binding wire. The rate excludes making of drip course which shall be paid extra. As per SI No. 284(A) 8 M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. 9 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. in M.S. Grills / Stair case railing / gates / trusher / racks etc. As per SI No. 502(A) (40X40X5 mm angle) 10 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glassto be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 409 butIndian Commercial flush shutters 32 mm. thick (excluding cost of allfitting). As per SI No. 471(A) 11 12 mmthick plaster with 1:4 cement and Corse sand work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. As per SI No. 584 (a) 12 Painting or varnishing work in small areas or new woodwork with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. As per SI No. 641 13 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coatover previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. for every subsequent coat on previously treated surface . As per SINo 647+648 14 Providing wall puttyon New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats As per SI No. Ch. 15 New Item 3 15 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters andalso including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour,Tools & plants etc.required for proper completion of the work. for every coat after the first coat. Si No. 649+650 16 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3approved cement andcoarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- chargeAs per SI Ch.14 New Item 4 17 Dismentling of RCCDSR 15.2.1 18 Dismentling of brick workSOR SI Ch-17=692 19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. As per SI No. 21.11 20 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 21 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 22 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 600x450 mm 23 Providing and fixing toilet paper holder :C.P. Brass 24 Providing and fixing of PVC pipes 100 mmdia 25 Providing and fixing CPVCpipes complete with fittings and clamps, i/c cutting and making good the walls etc.Internal work - Consealed on wall 20 mm nominal outer dia pipes 26 Providing and fixing CPVCpipes complete with fittings and clamps, i/c cutting and making good the walls etc.Internal work - Consealed on wall 25 mm nominal outer dia pipes 27 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore 28 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:893115mm nominal bore 29 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore 30 Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.15mm nominal bore 31 Providing and fixing PTMT grating of approved quality and colourCircular type15mm nominal bore 32 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soilPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 33 P/F of PTMT towel rails 600mm long 34 P/F of PTMT shop dish 35 Wiring point for light with 1.5 sq.mmFR PVC insulated multistrand single core copper conductorcable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slabalong with the reinforcement before concreting,complete with 1.5sqmm. FR PVC insulated multistrand single core copper conductorcable as Earth wire , piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc.complete in all respect as directed including matching colour wash. 36 Wiring point for fan/fresh air fan (light duty exhaust fan) with1.0 sq.mmFR PVC insulated multistrand single core copper conductorcable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with1.5sqmm. FR PVC insulated multistrand single core copper conductorcable as Earth wire, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet,etc.complete in all respect,as directed, including matching colour wash. 37 Power Plug 38 Size 20 mm dia 16SWG (1.5mm)thick 39 Light and Fans Supply and fixing of water tight oblong 10 Watt LEDbulk head luminaire with driver set confirming to IP 65 and above Protection.Complete in all respect. 40 Supply and fixing of Factory made 12 to 20 Watt LED Bulb fitting,cool day light,(65000 K temp.) suitable for Batton/Angle holder including makingconnection.Complete in all respect. 41 Supply of AC 300 mm Sweep, 230/250 Volts, 50 Hz exhaustfan (Heavy Duty) withblades,cover etc. complete as required 42 MCBs and DBs Supply and fixing of 240 volts L series6-32 amp SP miniature circuit breaker (10 K A ) in existing MCB, DB complete with connections as required.(Legrand Lexic) 43 Alluminium pannel board as per Market rate 44 P/F of Matalic False cielling 595x595DSR 12.58.1
