Tender For Estimate For Interconnection Kodighar S/S To Baktal Dlf Feeder Under Naplakhedi D/C Oandm Dn. Sehore. - H-Beams 152 X 152 Mm., 37.1 Kg./Mtr.-11 Mtr. Long = 408.1 Kg 2 H-Beams 152 X 152 Mm., 37.1 Kg./Mtr.-15 Mtr.Long =565.5 Kg 3 Wpb160x160mm, sehore-Madhya Pradesh

Tender For Estimate For Interconnection Kodighar S/S To Baktal Dlf Feeder Under Naplakhedi D/C Oandm Dn. Sehore. - H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg 2 H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-15 mtr.Long =565.5 kg 3 WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 4 H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-9 mtr.Long= 333.9 kg 5 11 KV(45KN) Composite Polymer Disc Insulators 6 11 KV Strain hardware (T&C type) fittings 7 11 KV Pin Insulator Polymer Composit (5 KN) 8 M S Channel 100X50x6 mm 9 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 10 AAACRaccoon conductor0.075 sq. inch (80 sq.mm. Al.Eq.) 11 M S Angle 65X65X6 mm 12 (v) ACSRDog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) 13 AAACRabbit conductor0.05 sq. inch. (55 sq.mm. Al.Eq.) 14 XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 15 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 16 11 KV VCB, Outdoor Porcelain cladtype with complete structure and accessories excluding CT& pannel 17 11 KV.C.Ts.(Outdoor dry type)300-150/5-5 Amps 18 11 KV D.O. Fuse Unit Polymer type 19 Clamp65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 20 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 21 Stay set 20 mm. complete without Stay wire (Painted) 22 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 23 Stone Block/Pre cast block for base pedding(450X450X75MM) 24 Concreting of structures & foundation (1:3:6) 25 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 26 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 27 Red oxide paint 28 Aluminium paint 29 Danger Boards Enamelled 11 KV 30 M.S.Nuts with Bolts 31 MS strain plate 65x8mm 250mm long 32 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 33 Aluminium Binding wire and tape 34 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 35 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HTtrivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) 36 Danger Boards Enamelled 33 KV 37 9 KVGapless type( 5KA) Polymer for DTR 38 Stay set complete without Stay wire 16 mm. (Painted) 39 STAY WIRE 7/3.15 MM.(7/10 SWG) 40 Stay Insulators 90X65mm 41 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 42 Bi-metallic clamps Distribution Transformers Bushing 43 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 44 G.I. STRIP 25X3 MM1 45 G.I.Pipe 40 mm Dia C grade type 46 Bentonite compound powder 47 Galvanized nut & bolt with washer 48 Erection cost 49 18% (CGST+MPGST) on Erection cost

INR 590 /-

INR 7800.0 /-

INR 2.57 Lakhs /-