Tender For Certain Sanctioned Lbw And Revenue Works Of E/M Nature At Damana Under Ge Jammu; 1 Material and labour for steel swagged poles complete poles 9 mtr long complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 with one coat of red oxide primer and two coats of aluminium paint and including marking alternate 5 nos black and white strip 30 cm height with two coats of synthetic paint over a coat of primer including preparation of new surfaces complete all as specified and as directed. 2 Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection complete all as specified and as directed. 3 Material and labour for PVC insulated and sheathed cable of size 1.5 Sqmm 3 core copper conductor multistranded 1100 volt grade 230 volts running through PVC conduit of dia 20 mm with strip clamping on poles at 3 places complete all as specified and as directed by Engineer-in-Charge. 4 Supply and fixing and fabrication street light bracket made out of GI tubing suitable for 60 watt LED light grade upto 1.2 mtr length 25 mm dia, bend to shape suitable for security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc complete all as specified and as directed. 5 Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed. 6 Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and as directed. 7 Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and as directed. 8 Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and as directed. 9 Material and labour for PVC junction box of size 155 x 210 x 92 mm with locking arrangement suitable for cable connectors, 01 No MCB single pole, 6 Amp complete with suitable size of cable glands and mild steel clamps nuts, bolts and washers etc complete all as specified and as directed. 10 Material and labour for fixing of GI tubing 25 mm bore light grade, on poles for cable from trench to junction box complete, on walls, under floors, road crossing, as required at site complete all as specified and as directed by Engineer-in-Charge.Note: - Clamps, Nut bolts, saddle etc will be measured and paid separately. 11 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in loose/ soft soil and getting out for underground cable/ erection of poles, stays etc complete all as specified and as directed by Engineer-in-Charge. 12 Description all as per Ser item No 11.00 here-in-before but exceeding 1.5 mtr deep but not exceeding 3.0 mtr deep complete all as specified and as directed. 13 Material and labour for sand cushioning for cable with river washed sand and punning to provide required cover as per SSR part - I complete all as specified and as directed by Engineer-in-Charge. 14 Supply, laying and fixing of DWC HDPE pipe for protection for power cable (orange in colour) of size 50 mm dia complete with joint fittings and including cutting, jointing and clamping complete all as specified and as directed. 15 Material and labour for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), mechanically crushed stone for mass filling in pole pit and foundation etc including provision of necessary form work to achieve fair finished surfaces complete all as specified and as directed. 16 Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in pole foundation, stay pits etc including provision of necessary form work to achieve fair finishes surfaces complete all as specified and as directed. 17 Material and labour for PCC (1:2:4) type C-2 (using 40 mm graded crushed stone aggregate) as in pole foundation, coping, stay pits etc including provision of necessary form work to achieve fair finishes surfaces complete all as specified and as directed. 18 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge. 19 Removal of excavated material not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge. 20 Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 4 core complete all as specified and as directed. 21 Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 4 core complete all as specified and as directed. 22 Supply and fixing SMC pole mounted box of size 6 x 4 x 4 with hinged door including clamp, nuts, bolts and washers complete all as specified and as directed. The box includes: -(a) MCB single pole 6 Amp, 10 KA B series mounted on din rail - 1 No.(b) Connector block suitable for 1 phase. 23 Supply and erecting in truly vertical position steel tubular swaged poles 410 SP-55 (11.00 mtrs long) complete with 300 x 300 x 6 mm thick MS base plate continuously welded at bottom of pole and MS sheet 2 mm thick plug welded at top, bolts, nuts and screws including one shop coat of red oxide primer and internally bituminous painted including painting with two coats of aluminium paint and black and white strips 30 cm upto 1.5mtr height from top of coping in strips complete all as specified and as directed. 24 Material and labour cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts and washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat of red oxide primer and two coats of aluminium paint complete all as specified and as directed. 25 Material and labour for new LED flood light fittings of 200 watt, system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, silicon gasket for IP-66 protection suitable for pole mounting SMD LED array with lense, cool white 6500 K, system efficacy 110 lm/W, 240 Volts AC, 50 Hz, CRI >70% operating voltage range 160 V - 270 V, Power factor >0.95, working temperature range - 20º C to 60º C, built in surge protection more than 10 KV with facility including making proper connection complete including cutting, welding, drilling holes, nut bolts, washer complete all as specified and as directed by Engineer-in-Charge. 26 Supply, laying and fixing of DWC HDPE pipe for protection for power cable (orange in colour) of size 75 mm dia complete with joint fittings and including cutting, jointing and clamping complete all as specified and as directed.
