|
| 1 | Name of Work: Upadhyaksh Jhansi Vikas Pradhikaran mahoday ke Camp Office me Electrification and Plumbing ka karya.Note :-(1)-GST Excluded on the aforesaid work. |
| 2 | PLUMBING Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: DSR E&M 2022- Item no17.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests (17.1.1) |
| 3 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR E&M 2022- Item no17.3 W.C. pan with ISI marked white solid plastic seat and lid. (17.3.1) |
| 4 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. As per D.S.R. No. 17.4.1 |
| 5 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR E&M 2022- Item no17.7 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.( 17.7.1) |
| 6 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.As per D.S.R. No. 17.31 |
| 7 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. As D.S.R. No. 17.33 |
| 8 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. As per D.S.R. No. 17.71 |
| 9 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.As per D.S.R. No. 17.73.2 |
| 10 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore. As per D.S.R. No. 18.21.2.1 |
| 11 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729. As per D.S.R. No. 17.38.1.1 |
| 12 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729. As per D.S.R. No. 17.38.2.1 |
| 13 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand cast iron S&S as per IS: 3989. As per D.S.R. No. 17.60.1.1 |
| 14 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand cast iron S&S as per IS - 3989. As per D.S.R. No. 17.60.2.1 |
| 15 | Extra for Providing & Fixing 125mm dia C.P. grating in place of CI. Grating over floor traps. As per Market Rate. |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes. As per D.S.R. No. 18.8.1 |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes. As per D.S.R. No. 18.8.2 |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal outer dia Pipes. As per D.S.R. No. 18.8.3 |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 40 mm nominal outer dia Pipes. As per D.S.R. No. 18.7.5 |
| 20 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore. As per D.S.R. No. 18.18.3 |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per D.S.R. No. 18.48 |
| 22 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore. As per D.S.R. No. 18.16.1 |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal inner dia Pipes. As per D.S.R. No. 18.9.8 |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal inner dia Pipes. As per D.S.R. No. 18.9.9 |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm nominal inner dia Pipes. As per D.S.R. No. 18.9.10 |
| 26 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. As per D.S.R. No. 2.10.1.2 |
| 27 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe. As per D.S.R. No. 19.2.1 |
| 28 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. As per D.S.R. No. 19.4.2.1 |
| 29 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : As per D.S.R. No. 19.7.1.1 |
| 30 | Supply & fixing 4 way diverter concealed. As per Market Rate. |
| 31 | Supply & fixing bib cock.As per Market Rate. |
| 32 | Supply & fixing angle cock.As per Market Rate. |
| 33 | Supply & fixing BathTub.As per Market Rate. |
| 34 | Supply & fixing Short Body.As per Market Rate. |
| 35 | Supply & fixing Long Body.As per Market Rate. |
| 36 | Supply & fixing dual flush tank.As per Market Rate. |
| 37 | Supply & fixing 5mm tuffan (colored) glass.As per Approved Rate. |
| 38 | Wax Polishing new wood work with approved ready made wax polish or approved French polish after rubbing down with sand paper including supply of all materials, labour and T&P etc. required for proper completion of the work. As per S.I. No. 658 |
| 39 | Providing of textile designer embroidery king size double bed sheet with two pillow cover pure cotton. |
| 40 | Providing of door mat. |
| 41 | Supply of generic glass 02 LED mirror including all fixing. |
| 42 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concretiong, complete with 1.5 Sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. Earth continuity wire and piano type switch etc. complete in all respects. As per SOR No. 138(C) |
| 43 | Wiring point for two ways light with 1.5 sq. mm. F.R. PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth contunuity wire and two number two way piano type switches & ceiling rose/angle/batten holder on 3 mm thick phanolic laminated Bakelite sheet etc complete in all respect as directed, including matching color wash.As per SOR. No. 139 (B) |
| 44 | Writing point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sqmm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire piano type switch & ceiling roase on 3mm thick Bakelite sheet etc. complete in all respect including matching color wash.As per S.O.R No. 140 (C) |
| 45 | Wiring point for 5 amp. Plug with 141 (B) but in PVC conduit with 1.5 Sqmm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit. As per SOR No. 141 @ |
| 46 | Wiring point for call bell with 1.5 Sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab along with reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc. complete in all respect including matching color wash.As per SOR No. 142 (C) |
| 47 | Wiring point for H.P.M.V./ Sodium Vapor lamp with 1.5 Sqmm FRLSH PVC insulated multistrand single core copper conductor in PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete in all respect including matching color wash. As per SOR No. 143 (C) |
| 48 | Wiring point exhaust fan with 1.5 askew mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire , Piano type switch & ceiling roase on 3mm thick Bakelte sheet etc. complete in all respect including matching color wash.As per SOR No. 144 (C) |
| 49 | Supply and fixing of power plug with 15A/250 volt flush switch and 5 pin 15A/250 volt flush type universal socket in suitable M.S. box of 1.75 mm X 50mm sixe with phenolic laminated bakelite sheet cover 3mm thick fixed with brass matching screw and cup washer. As per SOR No. 1139 |
| 50 | As in item no. 221(B) but in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq. mm. FRLSH PVC insulated multistrandcopper conductor cable as earth continuitywire drawn in conduit. As per SOR No. 221 (C) |
| 51 | Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy gauge rigid PVC counduit partly laid in slab along with reinforcement before concreting with 8 SWG GI earth continuity wire etc. complete in all respects. As per SOR No. 222(C) |
| 52 | Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy gauge rigid PVC counduit partly laid in slab along with reinforcement before concreting with 8 SWG GI earth continuity wire etc. complete in all respect. As per SOR No. 223 (C) |
| 53 | Supply and wiring submain with two number As in item No. 219 (B) but in 25mm dia heavy duty (2mm thick) PVC conduit with one number 10 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. As per SOR No. 219(C) |
| 54 | Supply and fixing of single light wall bracket on matching M.D.F.E.G. Board base etc. complete in all respect.As per SOR No. 412 |
| 55 | Supply and fixing of LED BULB. As per Market rate. |
| 56 | Supply and fixing of recess/ Surface/ Pendent mountinground 12 to 15 Watt LED Down Lighter havingPowder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT-AAA. As per SOR No. 1402 |
| 57 | Supply and fixing of 55 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with body with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect.As per SOR No. 1407 |
| 58 | Supply and fixingof factory fabricatedM.S. box in existingsunk of size 600mm x 480mm x 200mm deep with Godrej type almirah, cover with handle etc. fabricated from 18 SWG (1.25mm) M.S. sheet duly painted with red oxide primer followedby two coats of synthetic enamel paint complete with necessary conduit entry and D.P./T.P.N.; fixingarrangementsand provisionfor compartmentfor loose wires openable housingon the top and hold fast etc. including supply of all material, labour, T&P etc. required for proper completionof the work.As per SOR No. 1147 |
| 59 | Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. As per SOR No. 1116 |
| 60 | S&F of 40 Amp. 4 pole MCB (10 KA). As per SOR No. 1020 (CAT A ) |
| 61 | Supply and fixing of polished MDFEG / Teak ply cover for surface type B.D.B. above 4 ways complete with 50mm hinges,aluminium kunda, chhapka and handle etc. complete in all respect. As per SOR No. 1127 |
| 62 | Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. As per SOR No. 1122 |
| 63 | Supply and fixing hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG MS sheet incorporating 10mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material,labour, T&P etc. required for proper completion of the work. As per SOR No. 1149 |
| 64 | Construction of recess of 600mm x 480mm x 200mm size of main boards, distribution boards of all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all materials labour T&P required for proper completionof work. As per SOR No. 1141 (B) |
| 65 | Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no.8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. As per SOR No. 705 |
| 66 | Supply and fixingof electronicfan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.As per SOR No. 1203(C) |
| 67 | S & F surface/Flush mounting 6ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.As per SOR No.1027(C)(CAT A) |
| 68 | Supply and fixing of 240 Volts \"L\" series miniature circuit breaker in exiting MCB, DB completed with connections as required. As per SOR No.1002(CAT A) |
| 69 | Supply and fixing of MCCB (16KA) Thernal Magnetic release. As per SOR no. 1021 (CAT A ) |
| 70 | S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge.As per SOR No. 1025 (a) (CAT A ) |
| 71 | Supply of AC 230/250 Vlt5, 50 HZ ceiling fan with strandard down rod blades 2 Nos caps etc. complete (Make : bajaj/ Crompton Greavs) 1400mm sweep. As per Market Rate. |
| 72 | Supply of AC 230/250 volts 50 HZ exhaust fan including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj/ Crompton Greavs). As per Market rate |
| 73 | Providing and erection of stabilizer 4 KVA. As per Market Rate. |
| 74 | Instalation Charges as required for completion of work. As per Market rate. |
| 75 | Stand for oul door unit as required for completion of wall. As per Market rate. |
| 76 | Providing and fixing of drain pipe complete. As per Market rate. |
| 77 | Supply and fixing of Refengrent copper pipe. As per Market rate. |
| 78 | Supply & laying of aluminium conductor, PVC insulated, served, sheeted cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface the cable run shall be fixed on M.S. clamp etc. of suitable size as per direction of Engineer-in-charge. complete in all respect the armouring of the cable shall be properly connected with the earth conductor by clamp etc. 150sqmm 3-1/2 core. As per S.I. No. 379(a) |
| 79 | S&F of 200 AMP four pole Mouled case type on laod on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge.As per SOR No. 379(A) |
