Tender For Re-Engineering Work Of Balicha Tiraha. (2901)- 1 Item Code [ NH PWD BSR udaipur 2024 5.6]:Item Type [building] :: Sub Item Code [ NH PWD BSR udaipur 2024 5.6 + NH PWD BSR 2024 5.6.1.2]: Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with Front end loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and filler as per table 500-9 with aggregates in hot mix plant More than 60-90 TPH Transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification : Clause -507 & 112) with all lead.Grading I (19 mm nominal size) - Bitumen @ minimum 5.20% of mix & thickness 50 mm VG 40 GradeGrading I (19 mm nominal size) - Bitumen @ minimum 5.20% of mix & thickness 50 mm VG 40 Grade 2 Item Code [10.2 A ]:Item Type [road] ::Sub Item Code [10.2 A+ (iii)]: Retro-reflectorised Traffic Signs Providing and fixing of retro-reflectorised cautionary , mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801 600 mm circular 3 Item Code [12.43.1 BSR2022]:Item Type [building] :: Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision . New work 4 Item Code [2022 1.3]:Item Type [building] ::Sub Item Code [2022 1.3 + 1.3.1]: Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth 5 Item Code [2022 11.17.3]:Item Type [building] :: 11.17 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Dark shade using ordinary cement. for footpath 6 Item Code [2022 12.2.2 CM 1:4 Pl.]:Item Type [building] :: Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick. 7 Item Code [2022 12.29]:Item Type [building] :: Extra for making Ornamental design like Kangooras Gola etc. as per Jaipur practice in cement plaster 8 Item Code [2022 12.46.1]:Item Type [building] :: Painting withsynthetic enamel paint of approved brand and manufacture to give an even shade two or more coat on new work for railing etc. 9 Item Code [2022 2.1.1]:Item Type [building] :: Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately ) 10 Item Code [2022 9.8 gate & grating]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 11 Item Code [2022 S 3.16.4]:Item Type [building] ::P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia 12 Item Code [2023 17.29.4]:Item Type [RUIDP] :: Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths full round HDPE DWC (double wall corrugated) pipes of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per direction of Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. 300 mm ID 13 Item Code [2023 42.21]:Item Type [RUIDP] :: SITC of Crystal control Road warning Blinker system with solar panel module with 300mm LED Module of minimum 190 Nos., Blinker Units, Charging circuit, suitable SMF Rechargeable Battery (12 Volt,), including wiring, connections etc. complete in all respect. 14 Item Code [2025 10.2 A]:Item Type [road] ::Sub Item Code [2025 10.2 A + (i)]: Providing and fixing of retro-reflectorised cautionary , mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801 900 mm equilateral triangle 15 Item Code [2025 10.4 A (i)]:Item Type [road] :: Providing and erecting direction and place identification retro-eflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801 16 Item Code [2025 11.1]:Item Type [road] ::Sub Item Code [2025 11.1 + I(i)]: Earth work in excavation for structures as per drawing and MoRTH specifications Clause304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth 17 Item Code [2025 11.4]:Item Type [road] ::Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 Sub Item Code [2025 11.4 + I(i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 18 Item Code [2025 16.17]:Item Type [road] :: Providing and laying 25 mm thick Mastic Asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing anti-skid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 100C protruding 1 mm to 4 mm over mastic surface, all complete as per Clause 516. 19 Item Code [2025 16.44]:Item Type [road] ::Sub Item Code [2025 16.44 + 16.44.2]: Providing and fixing stone slab covering over drains (Kota/Bijoliya Quarry) having thickness 75 mm to 150 mm including filling of joints in cement mortar 1:3 with 50 mm thick cement concrete flooring in 1:2:4 mix complete with good finish as per approved drawings and specifications. for drain Opeining Size 451 to 600 mm Stone Patty drain cover size 1000 mm x 600 mm x 100 mm 20 Item Code [2025 16.53]:Item Type [road] :: Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective back ground with additional border of 1.25 cm all arount it. 21 Item Code [2025 4.2 ]:Item Type [road] ::Sub Item Code [2025 4.2+ (iii)]: Granular Sub-Base with Close Graded Material (Table:- 400-1) Plant Mix Method Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1, 400-2 or any other course material as per design mix, as per CBR in subbase course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F. E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete. [MoRTH specification : Clause 401]. By mechanical means. For Grading-III Material 22 Item Code [2025 5.1]:Item Type [road] ::Sub Item Code [2025 5.1 + (i)]: Prime CoatProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502 23 Item Code [2025 5.2 i]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. 24 Item Code [2025 6.3 (ii) ]:Item Type [road] :: Sub Item Code [2025 6.3 (ii)+ (a)]: Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks) Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 60 mm as per drawings and as per IS 15658:2006. and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category A : Dentated units to key into each other on all four faces Zigzag shape as per IRC:SP:63-2004 25 Item Code [2025 road 10.2 1 iv]:Item Type [road] :: Providing and fixing of retro-reflectorised cautionary , mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801 ,800 mm x 600 mm rectangular 26 Item Code [2025 road 11.1]:Item Type [road] :: Sub Item Code [2025 road 11.1 + 11.1 ii]: .Earth work in excavation for structures as per drawing and MoRTH specifications Clause304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary rock (not requiring blasting) upto 3.0 m heightFor Retaining wall 27 Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] : Sub Item Code [2025 UNIFIED BSR 11.4 + V]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 R.C.C. grade M 25 28 Item Code [2025 UNIFIED BSR 11.6 III (iii)]:Item Type [road] :: Stone masonry work in cement mortar in foundation complete as per drawing and MoRTH specifications Clauses 1402, 1405, 2102 & 2104. Random Rubble Masonry In 1:6 cement mortar 29 Item Code [2025 UNIFIED BSR 16.41]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 16.41 + 16.41.2]: Providing and fixing of Reinforced Ferrocement Drain cover designed for class AA loading duly marked on cover with adequate steel reinforcement having thickness 75 mmto150 mm anti-corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. for drain Opening Size 451 to 700 mm Standard Drain Cover Size 1000mm x 800mm x 100mm 30 Item Code [2025 UNIFIED BSR 16.41]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 16.41 + 16.41.3]: Providing and fixing of Reinforced Ferrocement Drain cover designed for class AA loading duly marked on cover with adequate steel reinforcement having thickness 75 mmto150 mm anti-corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. for drain Opening Size 701to1200 mm Standard Drain Cover Size 1500mm x 600mm x 125mm 31 Item Code [2025 UNIFIED BSR 2.14 ]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 2.14+ (II) By Mechanical Means]: Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202(A) Bituminous Courses & Granular Courses 32 Item Code [2025 UNIFIED BSR 3.4 (i)]:Item Type [road] :: Construction of embankment with approved materials obtained from borrow pits with a lift 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 50 m as per MoRTH Specification Clause 305.3 33 Item Code [2025 UNIFIED BSR 3.5 (iii)]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and sides lopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 34 Item Code [2025 UNIFIED BSR 6.3 (iii)]:Item Type [road] :: Sub Item Code [2025 UNIFIED BSR 6.3 (iii) + (a)]: Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks) Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006. and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category A : Dentated units to key into each other on all four faces Zigzag shape as per IRC:SP:63-2004 Footpath for island crossing 35 Item Code [BSR2022 11.26]:Item Type [building] :: Random rubble dry stone Kharanja under floor. For footpath 36 Item Code [N.H.BSR PWD 20245.25 milling]:Item Type [Other] :: Milling of distress bitumenous layer upto 70mm depth in a single pass with suitable milling machine (capable of milling @ 200&300 sqm of area per hr) fitted with loading conveyer of loading the filled material directly on the trucks i/c hauling and stock pilling the reclaiming to bring to required specification to reuse with the approval of engineer - in - charge for safe disposal; with all leads and lifts complete in all respect as directly by Engineer - in- charge. *Note : The unutilized quality of reclaimed bituminous mix material shall be recovered. 37 Item Code [NH PWD BSR CIRCLE UDAIPUR 8.19]:Item Type [Other] :: Solar Raised Pavement Markers: As per ASTM D 4280 & ASTM D 788 Supply & Installation of Solar Raised Pavement Markers made of Aluminium Alloy Body with Squre shape, solar powered, LED self illumination in active mode. The solar stud marker shall support a load of 25000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to lS:12063:1987 standard and should withstand temperatures in e of 10°C to 75°C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency blinking is 2Hz. There should be super bright LEDs (one gach side with over 5000 (Milicandle) luminous intensity) and its visibilty should not less than l000meter distance in night. The Height, width and length of the marker shall be less than 20mm,125mm, 125mm and it should have one cylinder type shank 30mm + / - 2mm and length of shank should be 60mm +1-5mm. Fixing will be by drilling holes on the road for the shanks ,to go 38 Item Code [NH PWD BSR udaipur 2024 5.4.4]:Item Type [Other] :: Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 & 500-10 and design mix for base/binder course including loading of material with Front end loader, heating of binder (including cost of anti-stripping compound wherever required) aggregate and filler as per table 500-9, in hot mix plant More than 60-90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 505 & 112] with all leads Grading II (26.5mm nominal size) - Bitumen @ minimum 4.5% of mix using VG 40 ( thickness 50 - 75 mm ) 39 Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. zebra 40 Item Code [road 2025 11.8]:Item Type [road] :: Supplying ,fitting and placing TMT bar reinforcement in foundation complete as per drawings and MoRTH specifications Clauses 1009,1600 and 2102 41 Item Code [road 2025 3.14]:Item Type [road] :: Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads ,transporting to site,spreading ,grading to required slope and compacted to meet requirement of Table300-2 with lead upto 50 m as per MoRTH Specification Clause 305.3 42 Item Code [road 2025 4.6]:Item Type [road] :: Providing ,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site ,laying in uniform layers in sub-base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion ,etc as per Tables 400-12&400-13 and MoRTH Specification Clause 406. By Mechanical Means with all lead 43 Item Code [road 2025 5.2 ii]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. 44 Item Code [RUIDP 2023 14.6]:Item Type [RUIDP] ::Sub Item Code [RUIDP 2023 14.6 + 14.6.7]: Providing and laying structural plain/ reinforced cement concrete (design mix) of specified grade in substructure at all levels using concrete mixer and vibrator, including cost of form work, as per drawing and technical specifications complete as per clause 1500, 1700 and 2200 of MoRT&H specification including all material, labour, scaffolding etc. RCC Grade M -35
