Tender For Rate Of ARCHITECTURAL LIGHTING For Non SSR Rate For M C Parli V , Supplying And Erecting Integrated Led Posttop Light Fitting Min 40-45 Watt, The Lights Shall Be Die Cast Aluminum Housing With Spun Aluminum Top Cover Graphite Grey (Ral 7024), Along Decorative Crown Made Of Aluminum With Broom Golden Yellow (Ral 1032) ?Nished. The Luminiares Shall Come With Anti Corrosive Epoxy Polyester Powder Coated Graphite Grey / Black Finish, Uv Stabilized Clear Pc Diffuser Concealed With Ss Hardwares, Special Designed Die Cast Knob & 3Mm Thickness Ms Pole Mounting Bracket, The Lights Shall Be Highly Efficient Lm 80 Certified Smd Leds (> 150Lm/W) Mounted On Mcpcb, Pre-Wired With Constant Current Integrated Led Driver, Built In Surge 4Kv, The Fitting Shall Be Equiped With Additional Surge Protection Device 10Kv, Wide Operating Voltage Range 140 - 270V~, 50Hz, Driver Efficiency > 85% , Full Load Thdi < 10%, Working Ambient Temperature -10°C ~ + 50°C, Average Light Source Life (L70b50) 50,000Hrs, Instant Start Flicker Free Operation, Environment Friendly, Without Mercury, No Harmful Uv & Ir Radiation, Impact Resistance Ik08, Electrical Class 1 Impact Resistance Ik08, Cri = 70, Power Factory = 0.95, Color Temprature 3000K /4000K/6500K. Lumen Maintenance Data Shall Be Led Testing Per Iesna Lm-80-08 And Projected Per Iesna Tm-21-11 Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Integrated Led Posttop Light Fitting Min 90-100 Watt, The Lights Shall Be Die Cast Aluminum Housing With Spun Aluminum Top Cover Graphite Grey (Ral 7024), Along Decorative Crown Made Of Aluminum With Broom Golden Yellow (Ral 1032) ?Nished. The Luminiares Shall Come With Anti Corrosive Epoxy Polyester Powder Coated Graphite Grey / Black Finish, Uv Stabilized Clear Pc Diffuser Concealed With Ss Hardwares, Special Designed Die Cast Knob & 3Mm Thickness Ms Pole Mounting Bracket, The Lights Shall Be Highly Efficient Lm 80 Certified Smd Leds (> 150Lm/W) Mounted On Mcpcb, Pre-Wired With Constant Current Integrated Led Driver, Built In Surge 4Kv, The Fitting Shall Be Equiped With Additional Surge Protection Device 10Kv, Wide Operating Voltage Range 140 - 270V~, 50Hz, Driver Efficiency > 85% , Full Load Thdi < 10%, Working Ambient Temperature -10°C ~ + 50°C, Average Light Source Life (L70b50) 50,000Hrs, Instant Start Flicker Free Operation, Environment Friendly, Without Mercury, No Harmful Uv & Ir Radiation, Impact Resistance Ik08, Electrical Class 1 Impact Resistance Ik08, Cri = 70, Power Factory = 0.95, Color Temprature 3000K /4000K/6500K. Lumen Maintenance Data Shall Be Led Testing Per Iesna Lm-80-08 And Projected Per Iesna Tm-21-11 Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Wall / Floor Mounted Flush Type Light Fitting Min 3-5 Watt, The Housing Of Flush Type Light Shall Be Stainless Steel Aisi 316L, Diffuser: Toughened Glass Leds : Power Leds With High Efficacy (>120Lm/W), 3000, With Luminous Flux Maintenance Of 70% (L70 B20) At 50,000 Hrs. Mounting: Recessed Driver : Integral With Safety Diode To Protect The Led Module Against Voltage Peaks Up To 2Kv. P.F. > 0.5 Optics: Optics: 12Degree / 25 Degree Symetricsymmetric / 120° Wide /Diffused, Ambient Temperature Zone : -30 °C To +50°C Input Voltage Range : 100V – 280V Ac, 50-60 Hz. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingfloor Mounted Flush Type Lights 35-40 Watt Lights, Input Ac Voltage Shall Be 140V To 270V. Frequency 50/60Hz, Lumen Efficiency 60 To 100Lm/Watt, Cct(K), 3000K/ 4000K/ 5700K/ Single Color (R/ G/ B/ A)/ Rgbw, Optics Shall Be Symmetric: 10 °/ 15 °/ 30 °/ 40 °/ 60 ° Asymmetrical- Forward Asymmetric. The Luminaires Shall Be High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating, Recess Case Material- Abs/ Nylon, Frame Material- Ss316 And 8Mm Thick Extra Clear Toughened Glass With Silicon Moulded Gaskets For Ip67 Rating The Outer Housing Shall Be Stainless Steel - Aisi 304 Grade Hardware, Brass Pg7 Cable Gland For Thermal Management. The Lum Shall Be Having Integral / Non Integral Driver. The Lum Shall Have Osram/ Cree/ Seoul/ Bridgelux 3535 Discrete Smd Leds, With Complete Lm80 Certified Chip. The Lum Shall Have Low Junction Thermal Resistance For Long Life And Low Lumen Depreciation, Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20), The Lum Shall Have Outdoor Rated >85% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 15% & Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C, • Structured On High Performance Optical Grade Lenses In Pmma / Pc The Lum Shal Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015 Ip67, Ik10 As Per Iec-En 62262.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingfloor Mounted Flush Type Lights 18-24 Watt Lights, Input Ac Voltage Shall Be 140V To 270V. Frequency 50/60Hz, Lumen Efficiency 60 To 100Lm/Watt, Cct(K), 3000K/ 4000K/ 5700K/ Single Color (R/ G/ B/ A)/ Rgbw, Optics Shall Be Symmetric: 10 °/ 15 °/ 30 °/ 40 °/ 60 ° Asymmetrical- Forward Asymmetric. The Luminaires Shall Be High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating, Recess Case Material- Abs/ Nylon, Frame Material- Ss316 And 8Mm Thick Extra Clear Toughened Glass With Silicon Moulded Gaskets For Ip67 Rating The Outer Housing Shall Be Stainless Steel - Aisi 304 Grade Hardware, Brass Pg7 Cable Gland For Thermal Management. The Lum Shall Be Having Integral / Non Integral Driver. The Lum Shall Have Osram/ Cree/ Seoul/ Bridgelux 3535 Discrete Smd Leds, With Complete Lm80 Certified Chip. The Lum Shall Have Low Junction Thermal Resistance For Long Life And Low Lumen Depreciation, Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20), The Lum Shall Have Outdoor Rated >85% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 15% & Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C, • Structured On High Performance Optical Grade Lenses In Pmma / Pc The Lum Shal Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015 Ip67, Ik10 As Per Iec-En 62262.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingfloor Mounted Flush Type Lights 6-7 Watt Lights, Input Ac Voltage Shall Be 140V To 270V. Frequency 50/60Hz, Lumen Efficiency 60 To 100Lm/Watt, Cct(K), 3000K/ 4000K/ 5700K/ Single Color (R/ G/ B/ A)/ Rgbw, Optics Shall Be 12Deg / 25 Deg Symetric. The Luminaires Shall Be High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating, Recess Case Material- Abs/ Nylon, Frame Material- Ss316 And 8Mm Thick Extra Clear Toughened Glass With Silicon Moulded Gaskets For Ip67 Rating The Outer Housing Shall Be Stainless Steel - Aisi 304 Grade Hardware, Brass Pg7 Cable Gland For Thermal Management. The Lum Shall Be Having Integral / Non Integral Driver. The Lum Shall Have Osram/ Cree/ Seoul/ Bridgelux 3535 Discrete Smd Leds, With Complete Lm80 Certified Chip. The Lum Shall Have Low Junction Thermal Resistance For Long Life And Low Lumen Depreciation, Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20), The Lum Shall Have Outdoor Rated >85% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 15% & Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C, • Structured On High Performance Optical Grade Lenses In Pmma / Pc The Lum Shal Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015 Ip67, Ik10 As Per Iec-En 62262.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 15-22 Watt 300Mmlinear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700K Optics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 36-45 Watt Min 1000Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 18-25 Watt 600Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumen Depreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 320X60x108mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Flood 75 Watt Flood Light.The Housing Shall Be Of High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating With Multiple Color Options, Robust, Sleek Design With Excellent Heat Dissipation With 360° Cradle Movement For Omnidirectional Precise Focusing The Housing Shall Be With 4Mm Thick Extra Clear Toughened Glass With Silicon Moulded & Extruded Gaskets For Ip66 Rating. The Hosing Shall Come With Separate Integral Driver Compartment Ip 66. Hosing Shall Be Made Of Stainless Steel - Aisi 304 Grade Hardware With Minimised Windage Area (0.0676M²) The Housing Designed With Thermal Managment Of Radiator Fins In Vertical Direction To Ensure Proper Air Convection. Their Shall Be Separate Integral Driver Compartment For Thermal Isolation & Not To Affect Led Compartment During Maintenance, Provided With Brass Pg9 Cable Gland. The Luminiar Shall Be As Per Is 10322 (Part5/ Sec.5) & Ip66, Ik08 As Per Iec-En 62262 With Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Leds Shall Be High Efficacy (>145Lm/W) Outdoor Illumination Grade Smd Leds, Luminous Flux Maintenance 80%, 50,000 Hrs (L80b20), High Color Rendering :Cri-70, Thevarious Cct 4000K/3000K. The Lum Shall Be Outdoor Rated >90% Efficiency Constant Current Drivers With Over Voltage (440V Ac)/Undervoltage, Short Circuit & Open Circuit Protection 4Kv / 5Kv / 6Kv Inbuilt Surge Protection With Optional 10Kv / 20 Kv External Spd And Low Current Harmonics : Thd < 10%. The Lum Shall Be Low Flicker :<3% With Ambient Temperature Range : -30°C To 45°C. The Lum Shall Come With High Performance Optical Grade Lenses In Pmma / Pc And All Photometric Design Data For All Optics Available. The Frequency Of Lum Shall Be In Range Of 50 / 60 Hz With Luminous Efficacy Up To 120 Lumens /Watt. The Lum Shall Come With Cct (K) Option Of 3000K / 4000K / Rgb / Rgbw /Single Colour. The Lum Shall Have Optics In Degree : Symmetric : 10° /25° /35° /50° /60° /90° Asymmetric : 20°X 90° Elliptical / Fn - Forward Asymmetric 45Deg.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting 15W/Mtr Ip67 Mono Flexible Strip Along With All Accessories. The Plane Profile Allows Installation And Application In Surface Mount Or Flush Mount. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M[16.4Ft.],Compared With Traditional Fragile Glass And Harden/Yellowing Easily Pvc, Sheathing Material, Silicon Extrusion Technology Is An Advanced Process With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture.Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Constant Voltage Output- 24Vdc, Current O/P- 6.3A Max, High Power Factor >0.97(240Vac& Full Load),100-200Watt Thd<10%, Surge Immunity: Dm 6Kv, Cm 10Kv, Ip67. Approved Make Shall Be Philips, Moso, Invetronics, Bag, Or As Per Suitable Strip Light Manufacturer. , Supply & Installation Of Integrated Solar Poles With Decorative Post Top Type Led Luminiares Lights With Spun Almunium Housing Materials. Solar Poles Shall Be Included With Decorative Led Lights With 24 Watt (-/+5%) With Lumen Output Ofnot Less Then 2200 Lumens. The Led Light Shall Comes With Options Of Color Temperaturein Range Of 3000K / 4000K / 6500K. The Panel On The Pole Shall Be Made Of Solar Module High Efficiency Mono Crystallinewith Min 200W. The Complete Solar Module Efficiency >18%, Voc Of Solar Module Battery 17 V. Battery Used In The Pole Must Be Lithium Ferro Phosphate Battery 12.8 V 60Ah With Bis Approved Cell. The Poles Shall Come With 24 Hours With Dimming Back Up. Solar Charge Controller Type And Capacity Shall Be Mppt & 12.8 V 10 Amp. The Complete System Shall Support Dusk To Dawn Operation To Save Battery Life And Increase The Life Of System. The Poles Must Comes With Inbuilt Over-Charge Protection, Deep-Discharge Protection, Over-Current Protection, Short-Circuit Protection, Over- Voltage Protection. The Led Lumiare Shall Be Ip65 And & Ik 07 Rating. Height Of The Pole Shall Be 04 Meter Including Brackets. Column Cross-Section Shall Not Be More Then 158X158 Mm. Max Weight Of The Poles Shall Not Be More Then 75 Kg (±10%) And Shall Come With Powder Coated Paint. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Urbanspark, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of 10Watt Led Bollard With Extrused Aluminum And Die Cast Aluminum Housing With Uv Stabilized Translucent Pc Diffuser. The Bollard Shall Be Glare Controlled ?Tment For Smooth Illumination And Anti-Corrosive Epoxy Polyester Powder Coating ?Nish. The Bollard Shall Be Moulded Silicon Gaskets & Stainless Steel Fasteners And Must Have Energy Saving Upto 50% Compared To Conventional Luminaires. The Lum Shall Be Pre-Wired Built-In Constant Current Class 1 Led Driver And Eco-Friendly Without Any Harmful Uv & Ir Radiation. The Bollard Shall Be Of Graphite Da Grey (Ral 7024)With Impact Resistance Of Ik08 And Ingress Resistance Of Ip65. The Lum Shall Be Of Cri >70, With Lm80 Led Chip With Beam Angle Of 360 Degree. The Voltage Range Shall Be 140-270Vac. With System Lumens 850Lm. Driver Efficacy > 85%, Power Factor > 0.95 @ Fullload & Rated Voltage, Thd Shall Be < 10% @ Fullload & Rated Voltage With In Built Surge Protector 4Kv (Built-In), The Bollard Shall Have Avg Life Of 50000 Hrs (L70b50). Electrical Safety Classs I, Working Ambient Temp -10°C ~ + 50°C. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approvedmake Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supply Of 3100Mm Kedareshwar Frp Single / Double Arm Poles Made Of Marine Grade Composites (Marine Grade Corrosion Resistant & Hydrocarbon Solvent Resistant). The Inner Column Frame Made Of 60 Mm Od Mild Steel Pipe As Per Is: 1161 Or Is: 1239 Hot Dip Galvanized 65 Microns, Post Fabrication. The Gap Between Ms Pipe & The Frp Camouflaged Shall Be Filled With Pu Foam For Better Stability. The Pufoamis A Formulated, Cfc & Hcfc Free Polyether Polyol Blended With Zero Odp Blowing Agent Forexcelentflow Ability, Even Density Distribution, Good Dimensional Stability & Low Thermal Conductivity Properties. The Pu Foam Should Have 340 Mg Koh/Gm Oh Values, Viscocity@ 25°C Of 500 +/-50 Cps., Specific Gravity Of 1.0 To 1.15. Sections Is The Hdg Pipes & Cladded With Glass Reinforced Polymer Using Unsaturatedpolysterresin Along With 300 & 450 Gsm Emulsion Chopped Strand Mat Comprising Viscocity@ 25°C Should Be 300 To 400 Cps With Acid Value Of 25 Mg Koh/G. Volatile Content Of 35%. Specific Gravity 1.12 @25°C. Barcolhardness Of 40-42, Heat Deflection Temperature Of 60-63°C, Tensile Strength 525 Kg/Sqcm, Tensile Modulus Of 3000, Flexural Strength Of 1000 Kg/Sqcm, Flexural Modules Of 3200 Mpaformulated To Meet Speccphysical Requirements: Weatherability, Heat Resistance, Chemical Resistance, And Electrical Properties. The Glass Fibrescomplies With Din En-2.2 & Din En 10204-3.1. The Camouflaged Frp Grooved Column Is 90Mm Od. The Bracket Arm Is Hdg Post Fabrication, Further Fibrecoated & Given A Pu Paint Treatment For A Classic Surface Finish. All Hardware Is Of Stainless Steel. The Product Is An All Weather Proof & Maintenance Free. Its Self Colouredtextured Surface Finish With Scratch Resistant, Aliphatic Grade Uv. Stabilized Pu Paint With Uv Stable Polyurethane 120 S+/-5 Viscosity Aliphatic Paint, With Minimum Standing Life Of 05 Years. These Lamp Posts Are Individually Hand Crafted To Replicate Steel And Cast Iron. The Base Bollard Of The Lamp Posts Consist Of Access Door For Integral Fitment Of Electrical Accessories. The Base Pcd Is 250Mm With Adjustable Pattisof 50X6mm, Anchor Bolts Of Size M12x120mm, 4 Nos. The Base & Foundations Bolts Are Camouflaged With A Designer Detachablefrp Covering/Ring To Give It Appeasing Appearance. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supply Of Decorative Pole Of 7Mtr Height Trishul Single/Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 4000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 12Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Trishul Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supplying And Erecting Of Wall / Floor Mounted Type 15-22 Watt 300Mmlinear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation.The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : Dmx Rgbw / Single Colour R/G/B/A Optics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 36-45 Watt Min 1000Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 18-25 Watt 600Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumen Depreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 320X60x108mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Flood 75 Watt Flood Light.The Housing Shall Be Of High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating With Multiple Color Options, Robust, Sleek Design With Excellent Heat Dissipation With 360° Cradle Movement For Omnidirectional Precise Focusing The Housing Shall Be With 4Mm Thick Extra Clear Toughened Glass With Silicon Moulded & Extruded Gaskets For Ip66 Rating. The Hosing Shall Come With Separate Integral Driver Compartment Ip 66. Hosing Shall Be Made Of Stainless Steel - Aisi 304 Grade Hardware With Minimised Windage Area (0.0676M²) The Housing Designed With Thermal Managment Of Radiator Fins In Vertical Direction To Ensure Proper Air Convection. Their Shall Be Separate Integral Driver Compartment For Thermal Isolation & Not To Affect Led Compartment During Maintenance, Provided With Brass Pg9 Cable Gland. The Luminiar Shall Be As Per Is 10322 (Part5/ Sec.5) & Ip66, Ik08 As Per Iec-En 62262 With Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Leds Shall Be High Efficacy (>145Lm/W) Outdoor Illumination Grade Smd Leds, Luminous Flux Maintenance 80%, 50,000 Hrs (L80b20), High Color Rendering :Cri-70, Thevarious Cct Rgbw. The Lum Shall Be Outdoor Rated >90% Efficiency Constant Current Drivers With Over Voltage (440V Ac)/Undervoltage, Short Circuit & Open Circuit Protection 4Kv / 5Kv / 6Kv Inbuilt Surge Protection With Optional 10Kv / 20 Kv External Spd And Low Current Harmonics : Thd < 10%. The Lum Shall Be Low Flicker :<3% With Ambient Temperature Range : -30°C To 45°C. The Lum Shall Come With High Performance Optical Grade Lenses In Pmma / Pc And All Photometric Design Data For All Optics Available. The Frequency Of Lum Shall Be In Range Of 50 / 60 Hz With Luminous Efficacy Up To 120 Lumens /Watt. The Lum Shall Come With Cct (K) Option Of 3000K / 4000K / Rgb / Rgbw /Single Colour. The Lum Shall Have Optics In Degree : Symmetric : 10° /25° /35° /50° /60° /90° Asymmetric : 20°X 90° Elliptical / Fn - Forward Asymmetric 45Deg.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supply And Erectionand Programming Of 2Universe (1024Channels) Dmx Controller With Following Features & Specifications: Programmable With Software Offeringincredible Power With Multi-Zone, Extended Triggers And 16-Bit Channels Management. Intuitive Backlit Keyboard With 10 Presets And Zone Selection. With An Ethernet Connection And Wifi, The Scontroller Can Be Controlled Using Remote Apps From A Smartphone Or Tablet. This Is Built On The Latest Generation Of Lighting Controllers And Combines All Recent Innovations. 2X Dmx512 Universes In Live Mode (Computer/Tablet) • 2X Dmx512 Universes In Stand Alone Mode • Expandable From 2 To 4 Dmx512 Universes • Intuitive Backlit Keyboard With 10 Presets • 99 Scenes (Total) Across 5 Zones • Usb & Ethernet For Programming/Control • Multi-Zone Microsd Memory • 16 Dry Contact Trigger Ports Via 20-Pin Idc Socket • Clock And Calendar With Sunrise/Sunset Triggering • Network Communication. Control Lighting Remotely • Oem Customization, • Windows/Mac Software To Set Dynamic Colors/Effects, • Phone/Ipad/Android Remote And Programming Apps • Metal Bracket, Mount To A Wall Or Under A Desk, • Dmx In Or Out. Rdm Ready. • Extended Triggering Possibilities (Tca). Technical Data Input Power 5-5.5V Dc 0.6A Output Protocol Dmx512, Programmability Windows, Mac Os, Ios, Android Connections Type C Usb, Xlr3, Ethernet, 20-Pin (2X10) Male Idc Socket, Battery, Tcp Connections 2, Memory Microsd Sd & Sdhc (32Gb Max), Environment Ip20. 0°C - 50°C Buttons 10 Buttons For Direct Access 2 Buttons To Change Scene + 1 Button To Change Zone Dimensions: 160X90x45mm 268G , Supply And Erection Dmx/ Rdm Splitter/ Amplifier 1:4 Used In The Dmx/Rdm Lighting Control System. Automatically Recognize Dmx/Rdm Signals. 1 Channel Input, 4 Channels Distributed Output, There Is A Independently Photoelectricity Insulation Of >3Kv Between Input And Output Terminals, And Output Terminals Among 4 Channels, And 1 Bypass Channel, Bypass Function For Expanding Dmx Device Number. O/P Port- 3Pin Xlr-4, Relay Function For Amplifying Weak Dmx/Rdm Signals And Extending The Signal Transmission Distance. , Supply And Erection0.75 Sq Mm 3 Pin Jumper Cable Of 3Mtr Length For Dmx , Supply And Erection Dmx Cables 3 / 5 Core , Supply And Erectionof 6 Push Button Keypad/Panel Made Of Aluminium Brushed Cnc Style Modular With 6 Individual Push Buttons That Can Trigger The Dry Port Contacts. The Button Shall Be Quoted Along With Controllers Compatile With Dmx Controllers Protocal , Supply And Erection Of Underwater Light Rgb For Water Boies , Supply And Erection Of Decorative Pole Of 7Mtr Height Trishul Single/Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 4000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 12Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Bajrang Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supply And Erection Of Decorative Pole Of 9Mtr Height Trishul Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 6000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 20Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Trishul Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supply And Erection Of Decorative Pole Of 9Mtr Height Trishul Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 6000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 20Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Trishul Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only , Supply And Erection Of Frp Designer Lighting Pole Made Of Marine Quality Composite. It Is Reinforced With Glass Fibre Chopped Strand Mat Emc450, With Area Weight Of =/- 7.5% As Per Iso3374, Moisture Content Of <20% As Per Iso3344, Size Content Of 3.7(1+31%) As Per Iso 1887 And Breakage Strength Of >140N As Per Iso 3342. Isophthalic Unsaturated Polyester Laminating Resin Having Medium Viscosity And Low Reactivity Based On Isophthalic Acid And Standard Glycols, Dissolved In Styrene Monomer Is Used In Making The Product. The Resin Has Viscosity At 25°C ( P ): 400 To 500, Acid Value (Mg Koh/Gm): 15-20, Specific Gravity At 25°C: :1.11‡0.02, Volatile Content (%): 38 +/-3, Gel Time At 30°C (Minutes), (With Resin = 100 Grams; Accelerator 3% Cobalt Octoate = 1.0 And Catalyst Mekp M-50= 1.5 Ml): 8 To 12.Curedclear Cast Resins Comes With The Following Properties: Barcol Hardness: 42, :42 Heat Deflection Temperature (°C): 94, Tensile Strength (Kg/Cm2): 600, Tensile Modulus Map Of 3100; Elongation At Break: 2.5%; Flexural Strength (Kg/Cm2): 1050, Flexural Modulus (Mpa) Of 3200, Water Absorption @25°C (Mg) (After 24Hours) Of 20. The Method Of Testing And The Tolerances Are As Prescribed In Is-6746-1994. The Product Is Weatherproof And Maintenance Free With Long Design Life. Pre-Paint Treatments It Is A Self-Coloured Textured Surface Finish With Scratch-Resistant, Aliphatic Grade U.V. Stabilized Pu Paint With Uv Stable Polyurethane With Viscosity Of 80(+/-3 Sec), Gravity 97(+/-3)Grams, Fineness Of Grind 3 Micron With Long-Standing Life. The Frp Is Of Minimum 2 Mm Thickness With 10% Tolerance. The Frp Pole Is 4000 Mm Ht & 1500 Mm Wide. The Pole Has 1 Pc Luminaire On Top Which Is Suitable For 50Wt Led& 4 Diya In Fountain Shapes At The Base Bollard. The Pole Has Metal Section Reinforced With Frp For Product Stability. The Pole Comes With A Base Plate To Mount It On The Floor Surface.. All Hardware Is Ss304. The Pole Should Be As Per Designed By Pmc And Approved By Engineer In Charge. With 2 Years Warranty.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only , Supply And Erection Of Lader Bollardthe Bollard Shall Be Customized Should Be As Per Designed By Pmc And Approved By Engineer In Charge. With 2 Years Warranty.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only , Supplying And Erecting Of Flood 200 Watt Flood Light.The Housing Shall Be Of High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating With Multiple Color Options, Robust, Sleek Design With Excellent Heat Dissipation With 360° Cradle Movement For Omnidirectional Precise Focusing The Housing Shall Be With 4Mm Thick Extra Clear Toughened Glass With Silicon Moulded & Extruded Gaskets For Ip66 Rating. The Hosing Shall Come With Separate Integral Driver Compartment Ip 66. Hosing Shall Be Made Of Stainless Steel - Aisi 304 Grade Hardware With Minimised Windage Area (0.0676M²) The Housing Designed With Thermal Managment Of Radiator Fins In Vertical Direction To Ensure Proper Air Convection. Their Shall Be Separate Integral Driver Compartment For Thermal Isolation & Not To Affect Led Compartment During Maintenance, Provided With Brass Pg9 Cable Gland. The Luminiar Shall Be As Per Is 10322 (Part5/ Sec.5) & Ip66, Ik08 As Per Iec-En 62262 With Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Leds Shall Be High Efficacy (>145Lm/W) Outdoor Illumination Grade Smd Leds, Luminous Flux Maintenance 80%, 50,000 Hrs (L80b20), High Color Rendering :Cri-70, Thevarious Cct Rgbw. The Lum Shall Be Outdoor Rated >90% Efficiency Constant Current Drivers With Over Voltage (440V Ac)/Undervoltage, Short Circuit & Open Circuit Protection 4Kv / 5Kv / 6Kv Inbuilt Surge Protection With Optional 10Kv / 20 Kv External Spd And Low Current Harmonics : Thd < 10%. The Lum Shall Be Low Flicker :<3% With Ambient Temperature Range : -30°C To 45°C. The Lum Shall Come With High Performance Optical Grade Lenses In Pmma / Pc And All Photometric Design Data For All Optics Available. The Frequency Of Lum Shall Be In Range Of 50 / 60 Hz With Luminous Efficacy Up To 120 Lumens /Watt. The Lum Shall Come With Cct (K) Option Of 3000K / 4000K / Rgb / Rgbw /Single Colour. The Lum Shall Have Optics In Degree : Symmetric : 10° /25° /35° /50° /60° /90° Asymmetric : 20°X 90° Elliptical / Fn - Forward Asymmetric 45Deg.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Integrated Led Posttop Light Fitting Min 140-150 Watt, The Lights Shall Be Die Cast Aluminum Housing With Spun Aluminum Top Cover Graphite Grey (Ral 7024), Along Decorative Crown Made Of Aluminum With Broom Golden Yellow (Ral 1032) ?Nished. The Luminiares Shall Come With Anti Corrosive Epoxy Polyester Powder Coated Graphite Grey / Black Finish, Uv Stabilized Clear Pc Diffuser Concealed With Ss Hardwares, Special Designed Die Cast Knob & 3Mm Thickness Ms Pole Mounting Bracket, The Lights Shall Be Highly Efficient Lm 80 Certified Smd Leds (> 150Lm/W) Mounted On Mcpcb, Pre-Wired With Constant Current Integrated Led Driver, Built In Surge 4Kv, The Fitting Shall Be Equiped With Additional Surge Protection Device 10Kv, Wide Operating Voltage Range 140 - 270V~, 50Hz, Driver Efficiency > 85% , Full Load Thdi < 10%, Working Ambient Temperature -10°C ~ + 50°C, Average Light Source Life (L70b50) 50,000Hrs, Instant Start Flicker Free Operation, Environment Friendly, Without Mercury, No Harmful Uv & Ir Radiation, Impact Resistance Ik08, Electrical Class 1 Impact Resistance Ik08, Cri = 70, Power Factory = 0.95, Color Temprature 3000K /4000K/6500K. Lumen Maintenance Data Shall Be Led Testing Per Iesna Lm-80-08 And Projected Per Iesna Tm-21-11 Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingof 25M Trishul Mast With Shaft In Three Sections Suitable For 47M/Sec Wind Speed (As Per Is 875),Comprising Of Trishul Head And Damro On The Top Of The Mast. A. Base Dia. And Top Diameter (A/F) Top : 150 Mm / Bottom : 540 Mm Three Section Shall Be Of 520 B. Plate Thickness: Top : 4 Mm Middle : 4 Mm Bottom : 5 Mm. Cross Section Of Mast : 20 Side Polygon. Standard For Of Galvanisation : As Per Bs En Iso 1461 Size Of Opening And Door At Base : 1200 X 250 Mm Diameter Of Base Plate : 730 Mm Thickness Of Base Plate : 30 Mm Lightning Protection Finial : G.I Single Spike Max.Wind Speed : 50M/S As Per Is : 875 (Part - Iii) Number Of Foundation Bolts : 12 Nos. Pcd Of Foundation Bolts : 650 Mm Type / Diameter / Length Of Foundation Bolts : Ts 600 / 30 Mm Dia / 850 Mm Long. Material Construction : Hot Rolled Steel Plate Conform To Is 2062/Bsen 10025 Or Equivalent Grade. The Trishul Mast Should Be As Per Designed By Oem And Approved By Architect / Pmc /Engineer In Charge.Approved Make Bajaj, Valmont Philips Only , Supplying And Making Of Foundation Along With Foundation Bolts Manufactured From Special Steel Along With Nuts,Washers,Anchor Plate And Common Template With All Required Materials And Accessories As Per The Approval. The Foundation Design Shall Be As Per Designed Approved By Pmc And Engineer In Charge. , Supplying And Erecting Of Single Dome Aviation Obstraction Led Lamp Fixtures. , Supplying And Erectingof Outdoor Feeder Pillar With 32A Tpn Mcb Incomer, Single Dial Time Switch, 25A Tp Contactor For The Automatic Switching Of Luminaries, Power Tool Control With 2 No 9A Contactors And Raise/Lower Push Button, Incoming 35 Sq. Mm And Out Going 16 & 2.5 Sq. Mm Terminals. , Supplying And Erecting 24V, 240W, Ip67 Cv-Cc Driver Poweroutpur- 240W (±10%)Driver Featuring The Constant Power Mode. Power Sitc Should Operate From140~300Vac And Offers Models With Different Rated Current Ranging Between <3.1A At Full Load. High Efficiency Up To 80%, With The Fanless Design, Must Be Able To Operate At -0°C ~+45°C Case Temperature Under Free Air Convection. Output Parameters: I. Line Regulation: ±5% Ii. Load Regulation: ±5% Iii. Output Current Tolerance: ±5% Iv. Output Voltage Ripple: <3% Driver Protection: I. Input Voltage Protection: Cut-Off Voltage : >300Vac ± 15V , Cut-In Voltage : 290Vac ± 15V Ii. Output Short Circuit Protection: Auto Recovery - Hiccup Mode Iii. Output Open Circuit: Available Iv. Ouput Overload: Auto Recovery - Hiccup Mode V. Over Temperature: Shutdown & Auto Recovery Vi. Isolation B/W Input & Output: Withstand 1.5Kv For 1Minute Vii. Insulation Resistance : Between L & N To Dc Output:>10M? (To Be Measured With Test Voltage Of 500Vdc) Viii. Surge In Dm: 5Kv Driver Should Have En 61000-4-5 Approval For Surge Voltage Protection & Is 15885-2-13 For Bis Approval. Dimension: 219 X 63 X 35 Mm
