Installation Of Submersible Eletro Motor Pumping Set In Existing Tube Well And Repairing Of Water Transmission Arrangement At Ten Nos Different Hdtw/Dtw/Mdtw Sites Under Gangarampur Ai Sub Division Of Balurghat Ai Division Balurghat Dakshin Dinajpur
Tender Overview
Project Description
Installation Of Submersible Eletro Motor Pumping Set In Existing Tube Well And Repairing Of Water Transmission Arrangement At Ten Nos Different Hdtw/Dtw/Mdtw Sites Under Gangarampur Ai Sub Division Of Balurghat Ai Division Balurghat Dakshin Dinajpur
BOQ
| Sl. No. | Item Description |
| 1 | Withdrawal of electro motor submersible pumping set of fOllowing capacities from within the tubewell housing pipe of the fOllowing length by using all necessary requisites tools and plants and carefully as per direction of Engineer-in-Charge and stacking the same properly at site within the tubewell premises complete.(a) 100/150/200 cubic metre per hour capacity electro motor pumping set. Length of pump assembly of any length exceeding 18 metre length. |
| 2 | Joining water proof cable with the leads of the motor including soldering withrequisite water proof insulation and proper joining compoundNulcanized rubber Each set 99.01tape so that proper water proof insulation is assured. |
| 3 | Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the fOllowing depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controllerlstarter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.)(a)100/150/200 cubic metre per hour capacity electro motor pumping set. Length of pump assembly of any length exceeding 18 metre length. |
| 4 | Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve, column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends.(A) Carriage by road(a) Distance upto 50 km100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set) |
| 5 | Triming of damaged threaded portions(Single Ends) of 150 mm dia column pipe 3 Mtrs. Long and making new threads(Single Ends) of the same pipe including transportation charges of the pipes from Gangarampur(A-I) Sub-Division store to the site. |
| 6 | Electric welding charges upto 8 mm M.S. plate, M.S. channel etc. and other member of the barge including hiring charges of all tools and plants. Welding of M.S structural work with gas/electric. (b) Continous weld. |
| 7 | Supply of M.S Hexagonal Head Bolt and nut 16 x 65 mm |
| 8 | Supply of Rubber Insertation 150 mm dia |
| 9 | Add GST@ 18.00%(on it no 01 to 08) |
| 10 | Add cess@ 1.00% (on it no 01 to 16) |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender