|
| 1 | Schedule \"A\" |
| 2 | M & L for attending of breakdown in Fire Detection,Alarm System and Fire Fighting System at 183 MH, detection of nature of defect including carry out minor repairs, loose connection , change of small length of wire as required sizeto make the machine/equipment functional ,opening of switch board / panel board and refixing the same after necessary repair, etc complete all as specified and directed. Note:- (a) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the machine functional for minor repair. If replacements of parts / items is required to make the equipment/machinefunctional the cost of labour and material for the same shall be measured and paid for as\" S & F in repairs/M & L in repairs \" under relevant items of this schedule hereinafter and in that case this item shall not be measured. (c) If breakdown shall not be attended & rectified the same day as recived by the contrcator except rewinding of Motor and other major spares as specified , the recovery will be made @Rs.1000/- per breakdown per day. And after 15 days of nonfunctional of any machine as specified for any reason the recovery will be made @ Rs. 2000/- per day till the machine operational. |
| 3 | S&F in repair gun metal fire hydrant valve 80 mm dia, single headed with flanged inlet and instantaneous out let on the existing stand post with brass nipple, including necessary bolts, nuts and washerscomplete all as spcified and directed.Make : Newage /Essel/Ever safe |
| 4 | S&F in repairS/S female coupling 63mm dia for hydrant valve ISI makred complete all as spcified and directed. |
| 5 | S&F in repairS/S male coupling 63mm dia for hydrant valve ISI makred complete all as spcified and directed. |
| 6 | S&F in repairfirst aid hose reel, wall mounted swinging type complete with drum, bracket, globe valve/ stop cock of size 19 mm dia, 30 mtr long high pressure hose reel tubing with branch pipe PVC shut off nozzle including taking down unserviceable old one , all as specified and as directed. Note :-Hose reell shall be as per IS 884 and hose tubing as per IS 8090 |
| 7 | Supply and fix in repair first aid hose reel nozzle valve PVC type of size 19 mm. |
| 8 | S&F in repair15 Mtr long rubber lined woven jacketed hose pipe 63 mm dia, type A (Reinforced rubber lined) as per IS 636with necessary instantaneous spring lock type coupling at the ends to match with landing valve/hose pipe/branch pipe with S/S male and female coupling conforming to IS 903 all as specified and as directed. |
| 9 | S&F in repair 30 Mtr long rubber lined woven jacketed hose pipe 63 mm dia, type A (Reinforced rubber lined) as per IS 636with necessary instantaneous spring lock type coupling at the ends to match with landing valve/hose pipe/branch pipe with S/S male and female coupling conforming to IS 903 all as specified and as directed. |
| 10 | S&F in repairfabricated MS hose cabinet, made of 18 gauge MS sheet 800mm X 600mm X 250mmdouble door with 3 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side brilliant white inside andcomplete all as spcified and directed. |
| 11 | S&F in repair3 mm thick glass of suitable size for hose boxcomplete all as spcified and directed. |
| 12 | S&F in repair63 mm dia S/S branch pipe instantaneous inlet and made15 mm bore nozzle short all as specified and as directed. Make: Newage /Essel/Ever safe |
| 13 | S&F in repairFire brigade inlet connection 2 way valve ISI marked including taking down unserviceable old one , all as specified and as directed. |
| 14 | S&F in repairofPressure switch Universal typeall as speficied and directed. |
| 15 | S & F in repairofPressure Gauge, 100mm diaL, 0 - 14 Kgs rating complete all as spcified and directed. |
| 16 | S&F in repair of3 phase starter for pump set 50 HP capacity. |
| 17 | S&F in repair of3 phase starter for pump set 15 HP capacity. |
| 18 | S&F in submersible cable 16 sqmm 3 core , all as specified directed. |
| 19 | S&F in repair 80mm bore castiron NonReturnvalve withbypass arrangement complete all as spcified and directed. |
| 20 | S&F in repair 100mm bore castiron NonReturnvalve withbypass arrangement complete all as spcified and directed. |
| 21 | S&F in repair 150 mm bore Cast iron sluice valve with flanged ends oftype PN 1.6 conforming to IS 14846 with cast iron wheel and brass spindle complete all as spcified and directed. |
| 22 | S&F in repair of 100 mm bore Cast iron sluice valve with flanged ends oftype PN 1.6 conforming to IS 14846 with cast iron wheel and brass spindle complete all as spcified and directed. |
| 23 | S&F in repair of 80 mm bore Cast iron sluice valve with flanged ends oftype PN 1.6 conforming to IS 14846 with cast iron wheel and brass spindle complete all as spcified and directed. |
| 24 | S&F in repair of 65 mm bore Cast iron sluice valve with flanged ends oftype PN 1.6 conforming to IS 14846 with cast iron wheel and brass spindle complete all as spcified and directed. |
| 25 | S&F in repair100mm Cast iron Foot valve including taking down from the suction side of pumpset from the sump and making good the distrubedall as specified and directed |
| 26 | S&F in repair 40mm gun metal, gate valve with iron wheel head, screwed both ends for iron pipe complete all as spcified and directed. |
| 27 | S&F in repair 25 mm gun metal, gate valve with iron wheel head, screwed both ends for iron pipe complete all as spcified and directed. |
| 28 | S&F in repair of three pole power contactorsuitablefor main pumpset of capacity 40 HP to 60 HP complete all as spcified and directed. |
| 29 | S&F in repairof three pole power contactor suitablefor jocky pumpset of capacity 10 HP to 20 HPforpumpset complete all as spcified and directed. |
| 30 | S&F in repairElectronic timerfor control panal any type complete all as spcified and directed. |
| 31 | S&F in repair ofPush button with indicator ( set of three R Y B )for panels all as specified and directed. |
| 32 | S&F in repair12 Volt 130 AHBattery for Diesel Pump setcomplete all as spcified and directed. |
| 33 | S&F in repair 150 mm bore GI tubing Heavygradewith all fittings laid in trenches or fixed to walls and ceilings or laying in floors complete all as spcified and directed. |
| 34 | All as per item No 32.00 here-in-above , but of 100mm bore . |
| 35 | All as per item No 32.00 here-in-above , but of 80mm bore. . |
| 36 | All as per item No 32.00 here-in-above , but of65 mm bore. |
| 37 | All as per item No 32.00 here-in-above , but of 40mm bore. . |
| 38 | All as per item No 32.00 here-in-above , but of25 mm bore. |
| 39 | M&L in repair for disconnecting of suction and delivery pipe and electric connections, from three phasecentrifugalpump sets motor and dismantling the pump sets completefrom the foundation, strip opening the unserviceable motor at site to located the fault and transporting to the local work shop . Strip openingthe motor and cutting/removing burnt out winding and rewinding the motor with as per existing original wire guage super enammelled copper wire including high quality\"F\" class insulating material with heat resistant sleeves, sealing compoundand varnishing and heating the stator upto varnish fully dry and testing the motor at work shop to thesatisfaction of Engr-in-charge. Coupled the motor with pump and installed at site as per existing position.Testing thepump setafter completion of work all as specified and directedof capacity 50 HP |
| 40 | All as per item No 38.00 here-in-above, but of capacity 15HPall as specified and as directed. |
| 41 | M&L for servicing ofcast iron sluice valve of 150 mm size by removing spindle, gate and check nut, cleaning and refixing new gland packing and rubber gasket complete all as specifed and directed |
| 42 | All as per item No 40.00 here-in-above, but of100 mm size. |
| 43 | All as per item No 40.00 here-in-above, but of80 mm size. |
| 44 | All as per item No 40.00 here-in-above, but of65 mm size. |
| 45 | M&L in repair for carry out General Servicing and Maintenance to diesel engine driven pump / fuel ijection pump of capacity 100 BHP including B check and service as per manufactures recommendation ,overhauling including repalcement of oil filter ,air filter ,gland packing ,diesel filter with replace ment of O rings ,Engine Oil and toping up of Coolant up to required leveletc which ever be requiredto making 100 % serviceabiltiy of the engine complete all as specified and as directed . |
| 46 | M&L in repair for diconnecting suction and delivery pipe lines from unserviceable Electric driven 3 phasecentrifugal pump from motorand opening the pump , cleaning , replacing the worn out part like - ball bearing , gun metal bush , pump shaft repair by lath,repairing of impeller by grinding / polishing ,water sealant of any typeand necessary gland packing etc.which ever be requiredto making 100 % serviceable of pump sets coupledwith motor and installed at site as per existingincluding testing after complete repairs of work all as specified and directedat site of capacity 50HP. |
| 47 | All as per item No 45.00 here-in-above, but of capacity 15 HPall as specified and as directed. |
| 48 | M&L in repair for disconnecting the three phase electric supply from panel board and taking out the burned wireing ofpanel boardand unserviceable spare part like contactor ,relays, timer , push botton, NO/NC volts coil and thermal load relays etc and re-wring the panel boardwith new required size of wire and acessorieswhich be required to make 100 % serviceability suitable forstarter panel for pump sets. |
| 49 | M&L for Painting to outer side of the existing feeder pillar board andpipe lines inside fire fighting installation bytwo coat of synthetic enamelled paint of existing colour after making the surface ready to paintand all as specified and directed.Make : Asian Paints / Shalimar / Nerolac / Berger Paints |
| 50 | All as per item No 48.00 here-in-above, butpainting of pump set of any size complete all as spcified and directed. |
| 51 | All as per item No 48.00 here-in-above, but painting of hose boxcomplete all as spcified and directed. |
| 52 | All as per item No 48.00 here- in-above, but painting of yard hydrant/Fire brigade point complete all as spcified and directed. |
| 53 | All as per item No 48.00 here in above, but painting of fire fighting system pipe line of size 25 mm to 150 mmall as specified and as directed. |
| 54 | M&L in repair of worn out Gland Packing of pump set / sluice valves / hydrantsany make / metal / sizeincludingwashers of any shape / sizeto avoid water leakage as indicatedcomplete all as spcified and directed. |
| 55 | M & L for cleaning of Detectors/ MCP/ Hooter any type in any height as and when required with air blowerfor making all detection system healthy complete all as spcified and directed. |
| 56 | M&L for testing of functionality of Fire Alarm System as and when directed by Engr- in-Charge by random check of devices by artificial smoke and other testing measures in any type of building complete all as spcified and directed. |
| 57 | M&L in repair for Reprograming of Existing fire alarm system installed at Various Locatioin including loope Checking, Changing of Device Location Name and Address of the Roomand preparing as buildDrawingcomplete all as spcified and directed. |
| 58 | S&F in repair addressable type multi sensor detector with smoke& Heat combination complete all as spcified and directed. Make: Edward / GST/ Honey well / morley / Siemens. |
| 59 | S&F in repair addressable Soundercum- storbe complete all as spcified and directed.Make: Edward/GST/Honeywell/Morley/Siemens. |
| 60 | S&F in repair addressable remote response indicators complete all as spcified and directed.Make : Edward/GST/Honey well / Morley / Siemens. |
| 61 | S&F in repair addressable Manual call point resettable type complete all as spcified and directed.Make : Edward/GST/Honey well/ Morley/Siemens. |
| 62 | S&F in repairSprinkler Bulb, 20mm dia, quick response with extended covereage type 57 degree CelsiusPendent / Side wall Type complete all as spcified and directed. |
| 63 | S&F in repair sprinkler rossette 25mm dia complete all as spcified and directed. |
| 64 | S&F in repair2 core4 sq mm PVC insulated unsheathed armoured FRLS multi stranded copper conductor cable complete all as spcified and directed.Make : Polycab/Havells/Finolex |
| 65 | S&F in repair2 core2.5 sq mm PVC insulated unsheathed armoured FRLS multi stranded copper conductor cable complete all as spcified and directed.Make : Polycab/Havells/Finolex |
| 66 | S&F in repair2 core1.5 sq mm PVC insulated unsheathed armoured FRLS multi stranded copper conductor cable complete all as spcified and directed.Make : Polycab/Havells/Finolex |
| 67 | S&F in repairPVC rigid conduit 20 mm dia complete all as specified and as directed. |
| 68 | S&F in repairPVC rigid conduit 25 mm dia complete all as specified and as directed. |
| 69 | S&F in repair 12 V96 AH Battery complete all as spcified and directed.Make : Exide /Amaron/Panasonic. |
| 70 | M&L for comprehensive maintenance of 25KVA/15 KVA/12.5 KVA UPSincluding cleaning of UPS and battery, Distle water and acid filling of battery complete all as spcified and directed.(25 kva-01 No, 15 KVA 2 NOS & 12.5 kva - 01 No) |
| 71 | S&F in repair transformer of suitable for 25KVA/15kva/12.5KVA UPScomplete all as spcified and directed. |
| 72 | Repairs/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door simplex, collective control system with repair/maintenance of unserviceable damage parts such as bearings bushes all type of shoes headers, hangers, car door, door locks, control cards, connector/links, welding of crack/broken MS parts, Repairs/maintenance of unserviceable damage of door safety edge and or sensor mechanical safety lock, magnetic lockor contact, car position indicator, door sill, car door sill necessary wiring hall push button assembly,Landing Operating Panel of any Size and capacity including all connected Accessories, complete with illuminated push button & direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for luminating of push button of each floors and cutting wall making good distrubed surface with masnary work to make with existing surface & cable as per requirement or safe operation of lifts minor repair to cabin, cabin light, fan etc ensure safety and smooth functioning of lift and disconnecting and repairs/maintenance of unserviceable/worn out parts such as warm wheel, warm shaft bushes, thrust bearing and pedestal bearing and necessary packing including overhaling, cleaning alignmentof gear box assembly and after Repairs/replacementof wornout parts re-assembley and fixing with existing machine with proper alignment complete maintanance of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing complete all as specified and directed.Note : -One mechanics shall be available at the lift complaint cell for safe & smooth functioning of the lift and to carry-out rescue operation. (a) 16 person lift (G+2) (Total 01 lift). |
| 73 | Repairs/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door simplex, collective control system with repair/maintenance of unserviceable damage parts such as bearings bushes all type of shoes headers, hangers, car door, door locks, control cards, connector/links, welding of crack/broken MS parts, Repairs/maintenance of unserviceable damage of door safety edge and or sensor mechanical safety lock, magnetic lockor contact, car position indicator, door sill, car door sill necessary wiring hall push button assembly,Landing Operating Panel of any Size and capacity including all connected Accessories, complete with illuminated push button & direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for luminating of push button of each floors and cutting wall making good distrubed surface with masnary work to make with existing surface & cable as per requirement or safe operation of lifts minor repair to cabin, cabin light, fan etc ensure safety and smooth functioning of lift and disconnecting and repairs/maintenance of unserviceable/worn out parts such as warm wheel, warm shaft bushes, thrust bearing and pedestal bearing and necessary packing including overhaling, cleaning alignmentof gear box assembly and after Repairs/replacementof wornout parts re-assembley and fixing with existing machine with proper alignment complete maintanance of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing complete all as specified and directed.Note : -One mechanics shall be available at the lift complaint cell for safe & smooth functioning of the lift and to carry-out rescue operation. (b) 16 person lift (G+1) (Total 02 lift). |
| 74 | Disconnecting and taking out unserviceable COP assembly for G+1/G+2 storey building, supply and fix new car operating panel assembly completed with illuminated push button for floor position alarm, non stop door open , door close, cabin fan, cabin light stop, attend out key etc with direction indicator,with LED displey with CPI card of stainless steel face plate in and including necessary wiring for laminating push button of each floors and cutting wall, making good disturbed surface with machinary work to complete all as specified and directed by Engineer-in-charge. |
| 75 | S&F in replacement of unserviceable cabin fan from car cabin, supply and fix, new cabin fan, non-oscilating type, axial flow, single speed 300mm sweep, 240 volts ISI marked with grill complete all as specified and directed. |
| 76 | S&F in replacement of automatic door drive unit with motor on car top with VVVF of 1 HP capaicity complete all as specified and directed. Make : Yasakava / Sneider complete all as specified and directed. |
| 77 | Dismantling and taking out unserviceable safety edge of anytype & supply and fixing new full beam infrared sensor upto full length of car doors (2.00 mtr) complete all as specified and directed. |
| 78 | Supply and fixing in repair Emergency alarm with complete accessories including rechargeable batteries alongwith box including connecting cables for G+1/G+2 storey building all as specified and directed by Engineer-in-Charge. |
| 79 | Dismantling and taking out unserviceable old landing push button box along with illuminated call button with control wiring and supply & fix landing push button box alongwith illuminated call button withcontrol wiring for G+1/G+2 storey building complete all as directed by Engineer-in-Charge. |
| 80 | Taking down old UNSV Announcement system and supply and install, testing and commissioning of MP3 voice announcement system in the controller and high quality speaker on car top, with necessery provision of shaft wires and travelling cable complete as specified. The audio indicator shall anounce floor position, ARD made operation, overload announcement etc and continious mild music in hindi and can be programmable for more music. The announcement system shall be in hindi and english. |
| 81 | S&F in replacement of sealed maintenance free batteries ( Set of Four) each of 12 volts, 18 AH ( Five year maintenance free) Make :- Exide/Amaron |
| 82 | Taking down old unserviceable OSG Pully from the position and supply and fix New OSG Pully both top and bottom for 8 & 13 Ps Lift as specified and directed by Engr-in-Charge. |
| 83 | Disconnecting and taking out old/unserviceable shaft wiring, supply and fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanished sheet metal trucking of 24 SWG up to ground floor in hoist for control to all function including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch all as specified and directed by the Engineer-in-Charge. |
| 84 | Disconnecting and taking out old/unserviceable Governer rope of size 8 mm dia(8/19 Construction) ungalvanised including necessery connection with pully in machine room and shaft pit complete with clamps, nuts bolts, and washers etc complete all as specified and directed by Engr-in-Charge. |
| 85 | Comprehensive Maintenance/ Repair and servicing of Mechanical laundry machines installed at 183 MH electrically operated , to provide trouble free service to the users for24 hours including Sunday / holidays such as function ofall controlling relays, Sensors , Valves etc.completeall as specified and as directed. Quoted rate includes Inspection and Testing of equipments during breakdown / On call basis for making the system/ Plant functional as per OEM standards, minor repair such as hose pipe, hose pipe clip,socker servecing, No extra payment will be done forsame. Details of machines as follows:-Details of Machines:- (a) Industrial washer extractor machine 50 KG Capacity 415 Volt Fully programmable with Micro processor control - 02 Nos (b) Drying Tumbler Machine Front Loading 50 Kg 415 Volt AC - 02 Nos (c) Ironing table 1480 Mm X 770 MM x 1830 mmwith padding , 415 Volt AC- 02 Nos (d) Industrial Flat Bed Press of Size 750 Mm X 1500 MMHead , Pneumatically operated , Electrically Heated- 02 Nos (e) Industrial Vaccum finishing Table with Irin 1200 MM X 750 MM with silicon Padding-02 Nos (f) Washer extractor 25 kg - 02 nos(f) Mobile table of size 1150mmx720mmx850mm - 02 nos(g) Sluicing Machine of capacity 15 KG - 02 nos(h) dry Linen trilley- 4 nos(j) Electrical control panel - 01 nos(k) General utility press- 1(l) hydro extractor - 02 Nos(m) Diesel gas steam generator - 02 nos(n) Air compressor Single stage Low pressure (2-6 Kg/Cm2)with 100 Ltrs Air tanl with motor 5 HP - 01 Nos Note :-Scope of work Include following:-(a) Conduct the routine checking of all Machines once in month or as when required as per breakdown/Trouble shooting as required at site including necessary T & P.(b) Generate reports about condition of machine and listout the spare parts if required, to be replaced.(c) Replacement of minor spare parts like indicating lamps in panel boards, Small piece of control panel wire , cleaning of panel boards etc as required to make system functional. (d) Contractor has to arrange necessary T & P as per scope of work .(e) Contractor has to arrange necessaty T & P for repair work as per scope of work.(f) Contractor has to attend the complaints from Department with in 24 Hrs irrespective of Sunday/ Holiday /nature of complaints.(g) Buffing of Steel surface and general cleaning of all laundry machines complete all as specified and directed by Engr-in-Charge. (h) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the machine functional for minor repair. If replacements of parts / items is required to make the equipment/machinefunctional the cost of labour and material for the same shall be measured and paid for as \" S & F in repairs\" under relevant items of this schedule hereinafter.(j) If brekdown shall not be attended & rectified the same day as recived by the contrcator except rewinding of Motor and other major spares as specified , the recovery will be made @Rs 500/- per breakdown per day. And after 15 days of nonfunctional of any machine as specified for any reason the recovery will be made @ Rs 2000/- per day till the machine operational. |
| 86 | S&F in repair main bearing housing for Industrial washer extractor machine 50 KG Capacity complete all as specified. |
| 87 | All as per item No 85.00 here-in-above but main bearing housing seal cover. |
| 88 | All as per item No 85.00 here-in-above buthousing bolt high tension. |
| 89 | All as per item No 85.00 here-in-above but main drive pulley bolt . |
| 90 | All as per item No 85.00here-in-above buthose pipe drain 50 mm. |
| 91 | All as per item No 85.00 here-in-above buthose pipe for detergents of size 50 mm . |
| 92 | All as per item No 85.00 here-in-above but3 way water solenoid valve. |
| 93 | All as per item No 85.00 here-in-above but door gasket . |
| 94 | All as per item No 85.00 here-in-above butoil seal . |
| 95 | All as per item No 85.00 here-in-above but\" O\" ring . |
| 96 | All as per item No 85.00 here-in-above butrear bearing . |
| 97 | All as per item No 85.00 here-in-above butfront bearing. |
| 98 | All as per item No 85.00 here-in-above butdrain valve . |
| 99 | All as per item No 85.00 here-in-above but\" V \" belt . |
| 100 | All as per item No 85.00 here-in-above butmotor pulley. |
| 101 | All as per item No 85.00 here-in-above but door limit switch. |
| 102 | All as per item No 85.00 here-in-above but door lock electromagnetic . |
| 103 | All as per item No 85.00 here-in-above but mechanical door lock. |
| 104 | All as per item No 85.00 here-in-above buttemperature sensor probe . |
| 105 | All as per item No 85.00 here-in-above butemergency stop push button . |
| 106 | All as per item No 85.00 here-in-above butSMPS. |
| 107 | All as per item No 85.00 here-in-above butelectric heater 6 KW. |
| 108 | All as per item No 85.00 here-in-above but electric heater contactor . |
| 109 | All as per item No 85.00 here-in-above butDoor Glass. |
| 110 | All as per item No 85.00 here-in-above but Door Glass outer ring including all fixing accessories. |
| 111 | All as per item No 85.00 here-in-above butShock Observer including all fixing accessories. |
| 112 | All as per item No 85.00 here-in-above butTension Spring including all fixing accessories. |
| 113 | S&F in repair motor pulley for tumbler dryer 50 KG Capacity complete all as specified and directed. |
| 114 | All as per item No 112.00 here-in-above but idler bearing . |
| 115 | All as per item No 112.00 here-in-above but main bearing . |
| 116 | All as per item No 112.00 here-in-above but \" V \" belt - idler drive . |
| 117 | All as per item No 112.00 here-in-above but \" V \" belt - main drive . |
| 118 | All as per item No 112.00 here-in-above but door gasket for tumbler . |
| 119 | All as per item No 112.00 here-in-above butdoor Glass for tumbler. |
| 120 | All as per item No 112.00 here-in-above butdoor Glass outer ring for tumbler. |
| 121 | All as per item No 112.00 here-in-above but antivibration pad . |
| 122 | All as per item No 112.00 here-in-above but door handle with latch . |
| 123 | All as per item No 112.00 here-in-above but bearing of electric motor. |
| 124 | All as per item No 112.00 here-in-above but contactorfor tumbler . |
| 125 | All as per item No 112.00 here-in-above but reversing timer . |
| 126 | All as per item No 112.00 here-in-above but Digital timer selection . |
| 127 | All as per item No 112.00 here-in-above but temperature controller . |
| 128 | All as per item No 112.00 here-in-above but heater 2 KW. |
| 129 | All as per item No 112.00 here-in-above but thermostat fortumbler. |
| 130 | All as per item No 112.00 here-in-above but heater contactor fortumbler . |
| 131 | S&F in repair main roller bearing gear side for Flat work Ironer Single Roller electric Heater Roller 450 mm X 2130 mm with padding , 415 Volt AC Pneumatically operatedcomplete all as specified. |
| 132 | All as per item No 130.00 here-in-above but roller bearing blower side . |
| 133 | All as per item No 130.00 here-in-above but bearing for conveyer roller. |
| 134 | All as per item No 130.00 here-in-above but pressure gauge for air regulator. |
| 135 | All as per item No 130.00 here-in-above butpolyester paddingfor Flat work Ironer. |
| 136 | All as per item No 130.00 here-in-above but SS ball valve 1 \". |
| 137 | All as per item No 130.00 here-in-above but \" V \" belt for Flat work Ironer . |
| 138 | All as per item No 130.00 here-in-above but gear drive pulley for Flat work Ironer . |
| 139 | All as per item No 130.00 herein above but VFD suitable for 5 HP motor.Make : L&T / ABB / Kirloskar / Schneider / Danfoss |
| 140 | S&F in repair Air solenoid valve for flat bed press Size 750 mm X 1500 mm Head , Pneumatically operated , Electrically Heatedcomplete all as specified. |
| 141 | All as per item No 139.00 here-in-above butcoir padding . |
| 142 | All as per item No 139.00 here-in-above but silicon form padding. |
| 143 | All as per item No 139.00 here-in-above but steam hose pipeof size 1/2 \" X 30 \" . |
| 144 | All as per item No 139.00 here-in-above butairhose pipe of size 1/2 \" X 30 \". |
| 145 | All as per item No 139.00 here-in-above butpneumatic cylinder . |
| 146 | All as per item No 139.00 here-in-above but tension spring . |
| 147 | All as per item No 139.00 here-in-above butelectric blower motor . |
| 148 | All as per item No 139.00 here-in-above butcontactor for motor 18 Amp . 3 pole. |
| 149 | All as per item No 139.00 here-in-above butcontactor for heater . |
| 150 | All as per item No 139.00 here-in-above but electric heater. |
| 151 | S&F in repair silicon form padding for Industrial Vaccum finishing Table with Iron 1200 mm X 750 mm complete all as specified. |
| 152 | All as per item No 150.00 here-in-above but padding cloth cover . |
| 153 | All as per item No 150.00 here-in above butsilicon iron rest pad . |
| 154 | All as per item No 150.00 here-in-above butthermostat 50 - 300 . |
| 155 | All as per item No 150.00 here-in-above butpaddle micro switch . |
| 156 | All as per item No 150.00 here-in-above but electric heater. |
| 157 | M&L for disconnecting and dismantling of electric motor of 15 HP capacity , strip opening the unserviceable motor at site to located the fault and transporting to the local work shop . Strip openingthe motor and cutting/removing burnt out winding and rewinding the motor with as per existing original wire guage super enammelled copper wire including high quality\"F\" class insulating material with heat resistant sleeves, sealing compoundand varnishing and heating the stator upto varnish fully dry and testing the motor at work shop to the satisfaction of Engr-in-charge. Refix the motor with machine and installed at site as per existing position.Testing themachine after completion of work all as specified . |
| 158 | All as per item No 156.00 here-in-above but 5 HP. |
| 159 | All as per item No 156.00 here-in-above but 3 HP. |
| 160 | S&F in repairPLC of Industrial washing machine (extractor) 50 KG Capacity including all nesessary wiring, programming complete all as specified and directed . |
| 161 | S&F in repairPLC of Industrial drying tumbler 50 KG Capacity including all nesessary wiring, programming complete all as specified and directed. |
| 162 | S&F in repairPLC of Flat work Ironer including all nesessary wiring, programming complete all as specified and directed. |
| 163 | S&F in repairMain Drive (controlling of all functionas of machine) for Industrial washing machine ( extractor) / Drying tumbler50 KG Capacity complete all as specified. |
| 164 | M&L for servecing and overhauling of waste autoclave including changing of PVC pipe , cleaning of chamber, changing of unserviceable belt complete all as specified and directed by Engr-in Charge. |
| 165 | M&L for servecing and overhauling of paper shreder including cleaning of chamber, changing of unserviceable belt complete all as specified and directed by Engr-in Charge. |
| 166 | M&L for servecing and repairing of nurse calling system including reprogramming / testing of system complete all as specified and directed by Engr-in Charge. |
| 167 | Supply and fixinginrepair onground /wall /hanging on roof 2D sign boardmade out of 4 mm thick acrylic sheet with reflective vinyl film letters of suitable size including necessary LED light fitting ,hanging arrangements./ fixing on ground with stainless steel pipeComplete all as specified and as directed Note : The size of board andthe size of writing letters as per site requirement. Complete all as specified and as directed |
| 168 | Supply and fixing in repair 3 D acrylic steel letters with lightfor making signage boards complete all as specified and directed |
| 169 | Supply and fixing in repairACP board for fixing 3 D letters for making signage boards complete all as specified and directed |
| 170 | Supply and fixing in repair 3 Dlogo with light fixing the signage boards complete all as specified and directed |
| 171 | Supply & fixing in repair Shadowless Light Fittings, Mountable Type, Ceiling suspended comprising of one Dome, 700mm dia, Lamps 12 Volt 50 Watt each, 7 No. halogen Lamp and Low Voltage Unit with CVT and DC Battery backup system 3.0 KVA for 30 Minute, etc. having light output 120000 Lux, complete all as specified and as directed.NOTE :FEATURES OF OT LIGHT : Cold bluish white light of high intensity with less shadow.The halogen Lamps to ensure substantial saving on Energy, while enhancing the output.Easy maneuver- ability to be ensured by spring balance and sterilisable handle and comprising of the following :-(a)Spring Balance Control(b)Colour Correction Filters(c)Special Gasket to prevent collection of dust(d)Parabolic Reflectors(e)Constant Voltage Transformer(f) Sterilisable-cum -Focussing HandleMake :HOSCO/ Meditech / Philips |
| 172 | Supply & fixing in repair Shadowless Light Fittings, portable type with Emergency Light Unit comprising 4 No. Bulb, having light output 70000 Lux, complete all as specified and as directed.NOTE :FEATURES OF OT LIGHT : Cold bluish white light of high intensity with less shadow.The halogen Lamps to ensure substantial saving on Energy, while enhancing the output.Easy maneuverability to be ensured by spring balance and sterilisable handle and comprising of the following :-(a)Spring Balance Control(b)Colour Correction Filters(c)Special Gasket to prevent collection of dust(d)Parabolic Reflectors(e)Constant Voltage Transformer(f) Sterilisable-cum- Focussing Handle |
| 173 | S&F in repair 12 V9 AH Battery all as specified and directed. Make : Exide /Amaron/Panasonic. |
