Providing Various Tourist Facilities For Pullaveli Falls In Dindigul District- 1 Clearing the Heavy Jungle by deploying JCB and the samestacked away from the work spot for disposal. The rate inclusive of Hire charges for machinary, fuel and driver betta, etc., complete and as directed by the engineer in charge. 2 Clearing the Heavy Jungle by deploying Hitachi and the samestacked away from the work spot for disposal. The rate inclusive of Hire charges for machinary, fuel and driver betta, etc., complete and as directed by the engineer in charge. 3 Earthwork excavation for foundation in all soilsexcept hard rock requiring blasting to a full depth with an initial lead of 10m and lift of 2m in hard stiff clay,stiff black cotton,hard red earth mixed with small sizeboulders etc.,complete and as directed by the engineer in charge. 4 Suppply and Filling in foundation with M sand in suitablethick layers well rammed and consolidated including watering complying with standard specifications etc., complete and as directed by the engineer in charge. 5 Supplying and filling in foundation and basement excavated earth soil in layers not more than 16cm thick well rammed watered, consolidated and compacted etc., complete and as directed by the engineer in charge. 6 Cement Concrete 1:5:10(One Cement five sand ten aggregates)using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc., complete in respects complying with relevant standard specification and as directed by the engineer in charge. 7 Plain cement concrete 1:2:4 (one cement two M.sand four jelly) using 20mm HBS jellyofB.S.S guage for foundation and flooringincluding cost and conveyance of allmatreials, labouretc complete, Complying with standard specification. 8 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such ascolumn footings, column pedestals, plinth beams, grade beams,staircase steps, etc.., requiring nominal strutting using mildsteel sheets of size 90cm x 60cm and 10 BG stiffened with weldedmild steel angles of size 25mm x 25mm x 3 mm for boarding, laidover silver oak joists of size 10cm x 6.5cm spaced at about 75cmcentre to centre or at suitable intervals etc. complete in all floorscomplying with standard specifcation. 9 Centering for soffits of RCC slabs of plane surface like lintels, beams,stair waist slabs & landing slabs ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed by the engineer in charge. 10 Column Footing and Plinth Beam 11 Plain Surfaces Beams, Roof slab 12 Centering forSunshade and Rectangular Column 13 Damp Proof in cement mortar 1:4, (one cement and four sand) 20mm thick mixed with Impermo powder 2% by weight of cement ect., ccomplete complying with standard specification. 14 Brickwork in Cement Mortar 1:5 (One cement and five sand) using IInd class chamber burnt bricks of size 9x4½x3 including cost and conveyance of all materials and labour charges and all other incidental charges etc.,complete complying with standard specification. 15 Upto For Basement 16 In Ground Floor 17 Brick partition wall in Cement Mortar 1:3 (One cement and three sand) 11.40 cum. thickness using II class chamber burnt bricks of 9” x 4 ½” x 3” including both side plastering with CM 1:5, 12mm thick and using hoop iron with reinforcement if found necessary etc.complete complying with standard specification.a)In Ground Floor 18 Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. 19 Upto Basement 20 In Ground Floor 21 Supplying fabricating and placing in position steel reinforcement using mild steel or ribbed star rods for all RCC works as per the design given including cost of steel and binding wire also in all floors steel and binding wire shall be supplied by the contractors etc., complying with standard specifications. 22 Special ceiling plastering for R.C.C slab beam and sunshades with cement mortar 1:3 ,10mm thick including tacking finishing neatly,cost and conveyance of all materials and all labour charges,curing etc., complete complying with standard specifications. 23 Plastering with Cement Mortar 1:5 (One cement and five sand),12mm thick including cost and conveyance of all materials and all labour charges,curing etc., complete complying with standard specifications. 24 Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab,the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required ,well beaten with wooden beater etc.,complete complying with standard specification. 25 Finishing the top of roof with one course of machine pressed tiles of size 23cmx23cmx20mm of approved quality laid in 1:3,12mm thick mixed with water proofing compound 2% by weight of cement used etc., complete with standard specification 26 Supply and fixing Window M.S.Grill of approved design including welding,transporatation and one coat of primer etc., complete complying with standard specification. 27 Supplying and fixing Teak Wood Frames for DOORS, WINDOWS, VENTILATORS and other similar joinery works with the following sizes and sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc.,complete complying with standard specification. 28 Upto 2m in Length 29 2m to 3m in Length 30 Supplying and fixing in position of 30mm thick Solid core flush shutters with Teak wood ply on both sides with teak wood lipping alround including cost and conveyance of all materials,Aluminium furniture fittings including labour charges for fixing in position of door shutter etc., complete and as directed by the engineer in charge. 31 Supply and fixing in position of UPVC ventilator .The outer frame will be 62mmx38mmx2mm 21.17Kg/m and the louvers with moving arrangements will be made with Aluminium,channel of size 60x30x4mm @ 1.27kg/m with necessary glass pans for louvers 4mm thick Alulminium clips 19.05x17.27x11.05x0.075mm @0.169kg/m including all materials,labour and power consumption charges required fro fabrication if necessary chipping dismantling making hole sing RCC columns,beams or masonary whereever necessary with power drill to the extent required and make good to the original conditions.complete complying with standard specification. 32 Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size 0.75m x 2.00m& 0.90 x 2.00m including necessary brass furniture fittings such as 125mm x 25mmbrass hinges-3Nos , 200mm x 12mmbrass tower bolt - 1No, 150mm x 12mm brass tower bolt - 2Nos,150mm brass handle - 2Nos, cylindrical lock - 1No, T.W lippings around the shutter etc., including cost, conveyance of all materials and labour charge for fixing complying with standard specification. 33 Flooring with Anti Skid ceramic tiles of approved quality, colourdesignandof size 305mm x305mmlaidincementmortar1:3 (One Cement and Three Sand)20mm thickincluding pointingthejointswithsamecolour cementtothefull depthofthetilesincludingcostandconveyanceofall materials and labour etc. complete complying with standard specification. 34 Dadooingthesidewallswithglazed walltiles ofapprovedqualitycolour, designandofsize300mm x 450 mmin cementmortar1:2- 10mmthickandpaintingwithwhitecementincludingfinishingthejointand polishingthetilessurfaceglassyetc. complete complying with standard specification. 35 Supplying and fixing in position best quality approved make, colour glazed Earthenwarewash hand basin oval shape of size 550x400mm in granite table top including cost of 15mm brass chromium plated pillar cock 32mm dia CP waste coupling with rubber and chain, 15mm dia CP angle valve, 15mm dia brass nipple, 15mm dia Nylon connections including fixing the wash in position with a pair of M.S. angle 50x50x6mm etc.Complete as per standard specification. 36 Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplyingandfixing10litrescapacityPVC/12.5litres capacity porcelin low level flushing tank with a pair of CI brackets, etc.,completewith allfittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications.(The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting 37 Supplying and fixing in positionIndian water closet of size 580x440mm, white glazed earthen ware of approved quality with P trap or Strap conforming to IS 2556-Part XII with 10 lit capacity PVC flush tank and internal fittings with sand cushion and forming, flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to case iron soil pipes by dismantling brick masonary, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition withoutquality with P trap or S trap conforming to IS:2556 leakage etc., complete complying with standard specifications. 38 Supplying and fixing in position Indian make white glazed earthernware Magnum urinal of ISI standard and best approved colour urinal of best approved quality with G.I.pipe connection of 32mm, bell mouthed, waste Pipe, 15mm. dia G.M. Gate value bring the urinal to the wall in position with necessary T.W.Plugs, clamps, shellac etc., including dismantling masonry if necessary and readoing the same to original condition fixing the 15mm. dia G.I.pipe and wheel valve.Painting the pipe with two coats of approved paint over one coat of primer and checked without any breakage complete complying with standard specification. 39 Supplying and fixing 50mm thick (both side polished) marble slabs for shelves (4 tier) with neat finishing. The rate inclusive of cost of slab and labour charges for fixing etc., complete as directed by the departmental officer. 40 Supplying and fixing of CP screw down tap heavy type 15mm dia including testing for leakage etc., complete complying with standard specification. 41 Supply and fixing of Health faucet of approved quality and make includingfixing in position etc., complete. 42 Supply and fixing 4” dia PVC Nahini trap of size with C.P. Gratings of 100mm x 75mmapproved quality etc. complete as directed by the Corporation Officers. 43 Supplying, layingandjointingoffollowing size ofCPVC pipesofapprovedmake and ISI quality includingfixingCPVCspecials but excluding cost of CPVC specials,cutting,threadingofpipesconcealingthepipesintowallwithnecessaryclampsandnails , dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete complying with standard specification anddirected by the Corporation Officers. 44 25mm dia 45 20mm dia 46 Supplying, layingandjointingoffollowing size of PVC pipesofapprovedmake and ISI quality includingfixingPVCspecials but excluding cost of PVC specials,cutting,threadingofpipesconcealingthepipesintowallwithnecessaryclampsandnails , dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete complying with standard specification anddirected by the Corporation Officers. 47 40mm dia 48 50mm dia 49 Supplying and fixing of 75mm diaP.V.C pipes 6Kg/SqCm of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.Above ground level upto 4m height. complete complying with standard specification. 50 Supplying and fixing of 110mm diaP.V.C pipes 6Kg/SqCm for Sanitory line of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.Above ground level upto 4m height. complete complying with standard specification. 51 Supply & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of U clamps at the centre of pipes etc.,complete complying with standard specification. 52 Supply and fixing the following PVC pipes and CPVC specials for pipe connection arrangements for inlet outlet sour and overflow etc., including cost of pipes specials valve labour charge fro lifting aligning ,cutting,threading,fixing and painting of GI pipe with two coats of approved quality enamel paint etc.complete complying with standard specification. 53 25 mm Dia CPVC Elbow 54 25 mm Dia CPVC Tee 55 25 mm Dia CPVC coupling 56 25 mm Dia CPVC Union 57 20mm Dia CPVC Elbow 58 20mm dia CPVC Tee 59 20mm dia CPVC Union 60 20 mm dia CPVC elbow 61 75mm dia PVC Plain elbow 62 75mm dia PVC Door Elbow 63 75mm dia PVC Door Tee 64 75mm dia PVCTee 65 110mm dia PVC Door Tee 66 110mm dia PVC Bend 67 110mm dia PVC Cowl 68 Supplying and fixing 20mm dia Brass ball valve, GI fittings, pvc specials of various sizes of approved quality and ISI band as per standard specification 69 Construction of manhole chamber of size 600x600mmx1100mm (above GL 200mm Below GL 900mm)to total height of 1100mm (ID) 200mm above ground level 900mm below ground level with a base concrete of 100mm thick 1:5:10 over a sand cushion of 100mm thick. The chamber should be constructed in brick masonry 230mm thick in CM 1:5 with stock bricks of size 9x41/2x3. The inner side of chamber plastrering in cm 1:5, 12mm thock, the outer chamber of wall to depth of 300mm plastered in cn 1:5, 12mm thick. The Chaber top covered with SRF cover slap 100mm thick. The rate is includuing the cost of material,Labour etc, complete.xincluding all works of earthwork,CC 1:5,10, 200mm thick,Brickwork, plastering in CM 1:5,12mm thick etc., complete complying with standard specification. 70 Providing Pathway hand rails using 304 grade 16 SWG SS pipes 40mm dia as verticals to height spaced at 1m centre with top railing 50mm dia and 25 mm dia pipe intermediate rigidly fixed with spacing of 0.30m centre to centre vertically in the existing concrete/brick wall structure and properly fixed including all materials and labour charges polishing transport charges etc., complete complying with standard specification. 71 Painting two coats with Plastic Emulsion paint of approved quality andcolour including one coat of emulsion primer over new wall surfaces including cleaning and preparing the surface, scaffolding etc., complete complying with standard specification. 72 Painting two coats with Elesto metric acrylic water proof Exterior Emulsion paint ( Dr.Fixit or equivalent) over one coat of primer (Prime seal of Dr. Fixit or equivalent) after cleaning the surface over old wall surfaces including scaffolding etc., complete. as per standered specification. 73 Painting two coats with Ready mixed synthetic enamal paint of approved quality and colour over new Iron surfaces including prepare the surfaces, cost of brushes and all materials, scaffolding etc., complete complying with standard specification. 74 Supply and installation of FRP/PVC storage water tank with double flab cover of approved quality and make including conveyance and lifting to top of terrace and fixing in position etc., complete. In the tank, necessary holes to be made for inlet, outlet and over flow connections. The rate is including cost and conveyance of all materials and labour for erection etc. complete complying with standard specification. 75 Supply and fixing SEPTIC TANK 75 FLUSH BR10 2450x1330x1220 OCEAN BC 4652 - SEPTIC TANKBRAND OCEAN,ITEM SEPTIC TANK,CATEGORY 75 FLUSH,MODEL NAME BR 10,MODEL NUMBER 4652SIZE 2450X1330X1220MM,COLOR TerracottaUNIT NOS,DISCRIPTION Our cost-effective Mini jumbo & jumbo septic tanks are much safe compared to the unconventional tanks since they are leak-free and hinders mosquito breeding. These tanks are designed specifically for longevity and durability. Standard FeaturesSingle LayeredEasy to CleanDurable and cost effectiveFitted with inlet and outlet provisionsAvailable in Black and Terracotta colorGUARANTEE Ten years provided by the manufacturer.Need to register complaint in the manufacturer’s portal to get guarantee and service etc., complete as directed. 76 Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete complying with standard specification. 77 Supplying and laying of 83mm thick high strength type of interlocking using rubber mouldfor the paver blocks with design and approved colour and manufacture with concrete mix 1:1:2 using 10 to 12mm size HBG stone jelly, in required shapes and sizes having minimum compressive strength of 40N/m2 to be laid in flurrying bone pattern with approved non sticking surface at top.the rate is inclusive of levelling the site, providing M Sand cushion 100mm thick below 6mm thick graded chipsgrouting and also inclusive of transportation charges, loading, unloading and labour charges for laying the paver block etc. completecomplying with standard specification and as directed 78 Supplying and fabricating the Mild steel steps and handrails using MS angle sections suitable sizes of . 150mm x 75mm x 6.5mm , 75mm x 40mm x 5mm and M.S sheet - 6mm thick The rate inclusive of cost of all materials, labour charge for fixing in position, one coat of metal primer and conveyance, etc., complete as directed 79 MS Channel section 80 M.S sheet - 6mm thick 81 Supply and erection metal framed petro reflected information signage board of high intensity grade of size 2.10m x 1.85m made with 3mm thick alco panel sheet board fixed over the metal framed M.S angle frames made with ISA 40mm x 40mm x 6mm angles for all-round and intermediate frames at a spacing of not more than 0.75m on vertical direction and 0.60m on horizontal direction including fixing of petro reflected information signage letters over the alco panel sheet board. The sign board is to be erected with two numbers of ISMC 150 x 75mm vertical poles of 5.45m height with necessary foundation concrete of C.C. 1:2:4 using 20 mm HBG Jelly to a size of 0.60m x 0.60m x 0.90m. The rate is including cost and conveyance of all materials, painting the iron works with two coats of enamel paint over one coat of primer, erection of the signage board in true alignment in the location as directed by the corporation officers complying with specification. 82 Supplying and fixing truss as shown in the sketch made out of 4x2 Rectangle sectionpurlin using 2x11/2 square tube6 round pipe 3 Round Pipevertical post and M.S plateas per standared specification 83 Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. 84 Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., completecomplying with standard specification. 85 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. 86 Manufacturing, Supplying and Fixing of Stainless Steel Hand railsfor staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm fromfinished floor level welded to 38mm diaStainless Steel pipe post of 1.00mm thick as vertical at900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges, etc. complete complying with standard specification. 87 Flooring with Pre-polished cement concrete Antiskid step tiles of 20mm thick of approved quality, colour and size of 0.30m x 0.30m over a base layer ofcement mortar 1:3, 20mm thick including pointing the joints with the same colour cement cost and conveyance of all materials complying with standard specification. 88 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V gradein suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) 89 Supply and Run of 2 of 2.5 sq.mm.(56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour 90 Supply and laying of 3 -1/2 x 35 SqmmPVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. 91 Supply and fixing of brass cable gland for 3 1/2 x 35 sqmm PVC LTUG aluminium armourd cable with earth connection 92 Supply and providing cable end termination of 3 1/2 x 35sqmm PVC LTUG aluminium armoured cable necessary aluminum cable sockets by crimping etc with eelctrical connection complete. 93 Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP43 protection with 40A 4 pole MCB isolator as incoming and 12 Nos 6A to 32 A SP MCB as outgoing inflush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB`s should be with the ISI mark. 94 Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2 x 1-1/2 x 1/4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1 x 1/4 with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete. 95 Earthing as per standard with an earth electrode of 2 meter class B GI pipe of dia not less than 32mm complete with necessary masnort work. 96 Supply and installation of 22W 4 feet LED tube light fitting with its electrical connection etc., complete. 97 Supply and installation of 18W 2 feet LED mirror light fitting with its electrical connection etc., complete. 98 Supply and installation of 15W LED Bulkhead fitting with its electrical connection etc., complete. 99 Supply and fixing of8 Brisk air ventillation exhaust fan with its electrical connection to make good condition. 100 GST at 18%
