Supply, Installation, Testing And Commissioning Of Sluice Gate Size 1500X1500mm On Nala At Shahdara Drain On The Right Bank 700M Behind Ic Shr 02 A Ganga Vihar., vihar-Delhi

Supply, Installation, Testing And Commissioning Of Sluice Gate Size 1500X1500mm On Nala At Shahdara Drain On The Right Bank 700M Behind Ic Shr 02 A Ganga Vihar.- 1 Supply of manually operated C.I Sluice gate of size 1500X1500mm seating & unseating head, as per IS 13349 complete set with all gear arrangement and S.S shaft etc. as per requirement :- MOC SHALL BE AS UNDER:- Thimble C.I FG 200 IS 210, Frame C.I FG 200IS 210, Shutter & Stiffeners C.I FG 200 IS 210, Seal Retainer Bar S.S: 304, Fasteners S.S: 304, Rubber Seal EPDM Rubber, Spindle S.S: 316, Operating Nut Bronze, Thrust nut Bronze, Size: 1500W x 1500H mm. Make:- Oriental/Jash/BIC/IVC/Any DJB Approved. SOR DJB 2022 Item Code 6.3.7. 2 Making Arrangement for stop water coming in main Channel where gate will be installed and desilting of channel with the help of suction machine and manual labour and making necessary arrangement with gunny bags as per site requirement keeping it safe. Removal of all silt from bottom of the gate chamber to execute the work. 3 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. DSR Civil 2021 Code No. 14.23(Payment will be made as per actual) 4 Making safety arrangement and temporary platform for execution of work at site by using long bamboo with cross bamboo, balli with rassa tools & tackles etc. to execute the work and other safety items for the protection of staff to make the working area safe from all toxic gases and free from accident during working at site as per NHRC guidelines 5 Nut-bolts, Stud and gasket as required. 6 Providing and fixing of horizontal Girder of size ISMB: 250 approx. 3 meter length (2 Nos.) 7 Providing and fixing of 400mmx400mm M.S. plate, 20mm thick length with holes. 8 Providing and laying in position cement concrete platform for sluice gate and operating stand of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as required at siteDSR-2021 (Civil) 4.1.3 9 Fixing/Installation of sluice gate by Lower down C.I. sluice gate with frame in sump. Fixing of frame with anchor bolt in the existing wall. Fixing of C.I. sluice gate with spindle guide bracket. Fixing of headstock on plate over girder M.S. plate. Fixing of plate over girder with nut bolt. Required at site. 10 Fabrication/Fixing MS Jaal of size 2mtrX2mtr MS mesh/jali enclosed Chamber 2 mtr height with 50X50X6mm angle and one side opening & locking arrangement as per site requirement including various work like cutting, welding, grinding, finishing work, painting etc. for safety of sluice gate. 11 Testing and commissioning of Sluice gate by opening and closing at site. Including cartage loading and unloading Charges

INR 500 /-

Refer document