Tender For Replacement Of Windows With Modulars Window Epfo Officw Karnal - DISMANTLING AND DEMOLISHING 3 Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50 metres lead. 4 Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : 5 Of area beyond 3 sq. metres 6 MASONRY WORK 7 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 8 Cement mortar 1:4 (1 cemernt :4 coarse sand) 9 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : 10 Cement mortar 1:4 (1 cement :4 coarse sand) 11 WOOD AND P.V.C. WORK 12 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 13 Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). 14 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 nmm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. 15 Casement cum fixed panel window having single casement panel at both ends & middle fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. 16 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above ) x (60 mm & above). (Height upto 1.2 metre; each openable shutter upto 0.8m width) 17 FINISHING 18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 19 12 mm cement plaster of mix : 20 1:4 (1 cement: 4 fine sand) 21 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 22 Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour. 23 Two coats 24 NEW TECHNOLOGIES AND MATERIALS 25 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately ) 26 12 mm thick 27 18% GST 28 PART B 29 P/f Window blinds - Venitian blinds 30 Providing and fixing 12mm thick toughened soundproof securityglass for uPVC door & window of approved brand and manufacture, including providing and fixing top & bottom pivot for fixing required door fittings, all complete as per direction of Engineer-in-charge.(Toughened soundproof securityglass) 31 Providing and FixingSS Handle of approved quality & make 450mm with complete accessories & screws as per direction of Engineer-in-charge. 32 Providing and Fixing glass door lock of approved quality & make with complete accessories & screws as per direction of Engineer-in-charge. 33 Providing and Fixing Antik Brass Sliding door Bolt of approved quality & 300x16 mmmake with complete accessories & screws as per direction of Engineer-in-charge. 34 Providingandlaying12mmthickAC-5, grade laminatewooden flooring & skirting of Lamiwood, Vista or equivalent make having 0.2mm thick direct laminate on top of specially developed substrate core (high densityfibreboard)ofplanksizeasper manufacturers specifications having smartlock,jointtongueandgroove constructionincludingto ofskirting should be sealed with 4mm thick teak wood lipping. The under layer has to be a 0.02mmthickalkaliresistantpolythyene sheet of density 920-935 Kg per Cum with a 1.5mm thick extructed polythylene foam ofdensity30-32KgperCumontopto secure the floor. The work shall be carried outaspermanufacturersinstallation procedure and as per direction of Engineer-In-Charge. 35 Providing and fixing wooden moulded beading of size 20x20mmto wooden flooring with iron screws on unexposed surface etc. Complete asperdirection of Engineer-In-Charge. 36 Providing and fixing L profile of size 38x38 to wooden flooring with iron screws on unexposed surface etc. Complete asperdirection of Engineer-In-Charge.
