Proposed Furniture Work In Treasury Office Lal Bunglow Campus At Jamnagar, Jamnagar-Gujarat

proposed Furniture Work In Treasury Office Lal Bunglow Campus At Jamnagar-1 Dismantling wooden partition shutters including fixtures and other attachment etc. complete and stacking them within all lead and lift. 2 Providing and fixing alluminium section with powder coated partition using aluminium section for frames 63x38mm including peneling the lower half panel with 9mm thick Eco board and upper half panels with 5mm tick sett glass including necessary accessories etc. complete. (Panels should not be more than 1.0 x 1.00Mt) 3 Providing and fixing Anodized aluminium single shutter door with 5mm thick glass top rail and 12mm thick Both side Laminated particle Board to bottom panel to shutter and side with window pivoted quality aluminium anodised section door with frame of 101.16 x 44.45 x 2.01mm and shutter 85.00 x 44.25 x 1.80mm style top, bottom rail and top fixed ventilator of fully glazed with using 5mm thick transparent approved quality of glass locking arrangement including all anodized alluminium fitting and fastening etc. comp. as directed and as per detailed drawing. 5 4 Providing & laying both side POLISHED KOTAH STONE SHELVES to C.B. with making the grooves in the walls and fixing the kotah stone finishing the same with cement mortar 1:2 etc. complete. Making Frame type cupboard of 18mm thick water proof plywood shutter with 1.00 mm lamination for outside and inside 0.8mm lamination for cupboard incl. necessary hydraulic type SS hinges, fixtures and fastening and locking arrangement complete 6 7 Making box type wardrobe including frame work with 18mm thick water proof plywood, rear side 8mm water proof plywood and shutter 18mm plywoodwith necessary drawers with 1mm laminate outside and 0.8mm inside laminate incl. sliding channel etc. complete Providing and supply wooden L shape Workstations size of 1500mm X 750mm & 900mm X 450mm-in (Frame Thickness: 60 mm with 1.3 mm thick Aluminium Channel: extruded aluminium section with slide in tiles), Laminate Tile on 1st module & Fabric / Laminate Marker on 2nd module and Electrical raceway above the worktop level on raceway and skirting level. Work top considered in 25mm thick Prelam Particle Board finish with PVC edge lipping 2mm thick. worktop height considered 750mm from ground level. Pedestal-450 X 450 X 675H, Top and Side made of 18 mm thick Prelam Particle Board with 0.8mm thick PVC edge bidding finish. G mm thick Prelam Particle Board at back side. Front drawer made of 18 mm thick Prelam Particle Board with 0.8mm PVC edge bidding finish. Drawer & Keyboard tray run on Telescopic Channel with lock and handle and 3 nos drawer unit with telescopic channel with lock and handle etc. All necessary hardware included. 8 Supplying of Med. Back Rev. Chair Upholstered with Leatherette seat made up of 12 mm +/- 1 mm thick hot pressed Mr grad plywood and back in two Pieces 12 mm Rear Back and 6 mm inner Back. Moulded polyurethane foam used in making seat with moulded density 45+/- 2 kg/m³. Back is made out of 32 Density Block Foam covered with 14 mm thick 32 density foam sheet (Block foam). Spine bracket made of M.S plate 8 mm Thickness connecting back with mechanism. Armrest top is soft touch polyurethane moulded of 250 to 300 density insert in chrome finish pipe having unique BIRD BEAKshape. The mechanism of the chair have following features: 360° revolving type 3.5mm Thk CRCA seat plate with 4mm thk CRCA channel plate synchro Mechanism, Tilt tension adjustable, Single position locking, Plastic component inside the mechanism of Grade MI 3530 and Epoxy Powder coated 70 Microns with tested 1.2 lacs cycles as per BIFMA Standard The chair provided with pneumatic height adjustment which have have stroke of 100 mm +/- 5 mm. The five leg Base is made up of 38mm dia x 1.2mm thick tubular with 3.15 mm thick centre hub CRC fabricated chrome finish. It have be fitted with 50 mm dia Twin wheel castor. The size of the base have be 660 +/- 1 mm pitchcentre-diameter. Load test as per BIFMA compliance. The twin wheel castors have be made of Nylon injection moulded in black colour. Overall dimensions of Chair have be, Width of Chair 630 mm, Depth of chair 630 mm as measured from base below. Height of back from ground min 950 to max 1050 mm. Seat height -min 470 mm to max 570 mm. Dimensions tolerance / variations have be within +/- 10 mm and directed by EIC 9 Providing and fixing Staff Table 36mm thick (partical board, interior grade) Size 1500 x 750 x 750mm post forming laminated top in approved shade with telescopic suspended metal keyboard with mouse tray with 36mm vertical legs made by pre-laminated partical board approved shade help with 30mm Dia S.S.leg &. Appron should be made from pre-laminated partical board approved shade with laminated finish Drawer unit box (0.60x 0.41 x 0.600) with 2mm thick pvc lipping with hotmelt gllued help on nylon castors with lock and telescopic channel should be made from 18mm pre-laminated MDF board with laminate finish as well as 19mm post forming Outside of shutter with Auto hinges of HAFELE or equivalent and drawer should made from 19mm post forming laminated in approved shade and CPU Trolley should be supplied of metal powder coated, Footrest (0.91 x 0.30) should be from 18MM pre-laminated MDF laminated finish in approved shade. Including all materials and labour etc. complete and instruction of engineer-in charge. (STAFF Table 1500 x 750 x 750mm) 10 Providing and fixing ENTERPRISE TABLE size shall be 1800 Width x 900 Depth x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish powder Coat( epoxy polyster). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube, finish powder coat (epoxy polyster). The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster). with CPU hanger 11 Providing and fixing HIGH BACK REVOLVING CHAIR The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1.0 cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture HIGH BACK SIZE 48.5 cm (W) X 76.0 cm (H) *SEAT SIZE 51.0 cm (W) X 48.0 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45+/-2 kg/m² and Hardness load 12 kgf as per IS 7888 for 25% compression can be locked in 6 positions High Back (W)76*(D) 70.7 (H)103.5-120.5 cm (SH)47.5-57.5 cm. 12 Providing and fixing THREE SEATER SOFA Overall Size: Width: 181m Depth: 78cm Height: 81.5cm Seating Height: 38cmUpholstery: Material: PVC.Shade: Black, Thickness: 1mm, Weight (GSM): 575, Tear strength (kg/5cm): wrap: 34.1 weft: 19.78, Breaking strength (Kg/cm2): wrap: 3.92 Kg weft: 2.59 Kg, Adhesion of coating kgf/5cm: warp: 3.05 Kg weft: 3.02 Kg, Colour Fastness to Rubbing (Dry/Wet) (scale 1-5): Dry = 3 Wet 3 Frame:Material: Pine Wood, Moisture content: 10-12%, Thickness of Plywood used: 12 mm & 18 mmSeat Foam : Material: Slab stock, Density: 32 kg/m3 at seat and 28 kg/m3 at backWebbing: Material: Nylon Thickness: 2 mmLegs Material: PVC with 4 mm bush 13 Providing and Arranging Rectangle Center table made from 1180mm x 600mm x 419mm C.P. teakwood leg and 19mm thick plywood structure and finished with 1mm thick laminate & top part of table covered with 8mm thick toughened glass with edge finish to be placed properly with 4pcs 54x10mm aluminium Disc glass table top adapter or rubber suction cup. Surface. All eposed sedges shall be covered with 8mm thick teak wood beading patti & exposed wooden & veneer faces to be dinished with matt finish melamine polish & non visible faces & edges shall be painted with enamel paint of matching shade of other finished surfaces including all materials and labours etc. complete as per drawing and instruction of engineer-in charge. 14 Providing and Fixing of Marvel Make Luzon Blackout / Zebra Blinds Blinds with fabric of 0.53 mm (± 0.05) thickness with top and bottom channel of Non-Rusting Aluminum Alloy, with 1.25 mm thickness and bottom channel of 1.50 mm thickness and 38mm diameter. Control Unit should be of ABS plastic with 1.50 mm polyester cord with 4.50 mm balls with stop lock arrangement inclusive of all necessary fixtures, fasteners and fitting etc. Black out/Zebra Blinds directd as per EIC. 15 Providing and supplying Fixed based chair with PU moulded cushion with MS pipe with hard chrome frame structure and white foam layer for seat and molded PU foam. White foam layer for back, both covered with thick cloth and draped with cloth of approved shade and texture (min. of Rs. 100/meter) with 2 years replacement guarantee. The chair to have wide polyurethane arm rest of approved shape. Complete chair should be in suitable shape. Rates to be inclusive of all taxes and free delivery at site. Selection of chair should be as approved by engineer in-charge and consultant.

INR 900 /-

INR 24000.0 /-

INR 23.28 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB