Tender For Under District Ayodhya, Atal Bihari Vajpayee Gate Near Petrol Pump On Ayodhya Gonda Road - Demolishing Rcc Work Manually/By Mechanical Means Including Stacking Of Steel Bar Bars And Disposal Of Unserviceable Materials As Per Direction Of Engine, ayodhya-Uttar Pradesh

Tender For Under District Ayodhya, Atal Bihari Vajpayee Gate Near Petrol Pump On Ayodhya Gonda Road - Demolishing RCC work manually/by mechanical means including stacking of steel bar bars and disposal of unserviceable materials as per Direction of Engineer In Charge DSR No. 15.1 3 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.. DSR 2.8.1 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm (nominal size) .DSR 4.1.8 5 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc, above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) . DSR No. 5.2.2 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR No. 5.22.6 7 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with DSR No.10.16.1 8 Nut-Bolt by weight DSR No.10.16.1 9 Rent for Crane up to 80 Tonne Capacity for 3 DaysDSR No. 67 10 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. DSR No. 13.9.1 11 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR No. 13.62.1 12 Retro-Reflective Sheeting type XI with 4 mm thick ACM double side .Manufacturing, supplying and fixing retro reflective sign boards made up of 4 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25 x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of chromate yellow primer (vertical MS-Tee support to be painted in black and white colours) . Back side of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 13 size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of requiredshade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 14 Centring and Shutring including strutting ,proping EtC. 15 Supply and Fixing of Information Board 16 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm (nominal size) .DSR 4.1.8 17 Providing and laying in position cement concrete of 1/1.5/3 C/CS/20mm Stone ballast DSR No. 4.1.2

INR 1180 /-

INR 29100.0 /-

INR 14.55 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB