Tender For TRUSS WORK - KERALA BANK , CREDIT PROCESSING CENTRE , IDUKKI COLONY P O, CHERUTHONY -- 1 PROPOSED TRUSS WORK AREA -Fabricating, providing and fixing in position Structural steel work, MS (RHS/SHS) riveted, bolted or welded in built up sections, trusses and frame work, including cutting, hoisting, fixing in position and applying 2 or more coats of approved synthetic enamel paint over a priming coat approved Zinc Chromate primer all complete.No extra for nut and blot. Sheets may be laid without any joints as single piece. 2 Corrugated/ Trafford GI Roofing sheets of 32mm pitchProviding & fixing in position . Roofing sheetincluding vertical/curved surface fixed with 8mm diameterpolymer coatedself trapping screws , with cyclonewasher or with, including necessary overlapping of sheetscomplete(up to any pitch in horizontal/vertical or curvedsurfaces), including making straight cutting in Roofing sheet to provide openings for Chimney Stacks, Skylightetc. including cost of 40x5mmMS Flat wind tie etc.complete.( 0.50 mm thick colour coated ) Make: CGISheets:Tata,JSW or equivalant approved bythe Bank. Note ; Sheet has to be laid above the structural steel members provide over existing RCC slab. 3 Providing and fixing in position 15cm wide,45cm overallsemi-circular, PVC gutter,with brackets bolts, nuts and washers etc. including making necessary nozzle connections with rain water pipes complete. Make ; Supreme , Prince. 4 Providing and fixing in position ridges or hips of width 60cm overall width,made out ofplain G.I.sheet fixed with8mm diameter polymer coatedself trapping screws. 5 Providing and fixingdownn waterpipes:110 mm diaPVC Pipes With Fitting and SpecialsProviding, fixing, testing and commissioning inposition PVC Pipe Type-B (4Kg/sq.cm) self fit-pipeconforming toIS:13592 including all specials and fittingssuch as bends, junctions, inspectiondoors, offsets, ventcowl,accesspieces/plugs,all jointing with PVC adhesiveand checking it to be water tight including chase cutting, drilling holes and fixing pipes to wall, floor,slab firmly withnecessary G.I. supports, clamp, hangers, nuts, bolts,washers and making good the same etc. complete asdirected by the Engineer-in-charge. 6 RENOVATION OF EXISTING TRUSS WORK AREA - Dismantlingexisting roofing sheet , gutters etc.,Clearing and disposing it away from the site at contractors risk . 7 Fabricating, providing and fixing in position Structural steel work, MS (RHS/SHS) riveted, bolted or welded in built up sections, trusses and frame work, including cutting, hoisting, fixing in position and applying 2 or more coats of approved synthetic enamel paint over a priming coat approved Zinc Chromate primer all complete.No extra for nut and blot. Sheets may be laid without any joints as single piece. 8 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 9 Corrugated/ Trafford GI Roofing sheets of 32mm pitchProviding & fixing in position . Roofing sheetincluding vertical/curved surface fixed with 8mm diameterpolymer coatedself trapping screws , with cyclonewasher or with, including necessary overlapping of sheetscomplete(up to any pitch in horizontal/vertical or curvedsurfaces), including making straight cutting in Roofing sheet to provide openings for Chimney Stacks, Skylightetc. including cost of 40x5mmMS Flat wind tie etc. complete.( 0.50 mm thick colour coated ) Make: CGISheets:Tata,JSW or equivalant approved bythe Bank. Note ; Sheet has to be laid above the structural steel members provide over existing RCC slab. 10 Providing and fixing in position ridges or hips of width 60cm overall width,made out ofplain G.I.sheet fixed with8mm diameter polymer coatedself trapping screws. 11 Providing and fixing in position 15cm wide,45cm overallsemi-circular, PVC gutter,with brackets bolts, nuts and washers etc. includingmaking necessary nozzle connections with rain water pipes complete. Make ; Supreme , Prince. 12 Providing and fixingdownn waterpipes:110 mm diaPVC Pipes With Fitting and SpecialsProviding, fixing, testing and commissioning inposition PVC Pipe Type-B (4Kg/sq.cm) self fit-pipe conforming toIS:13592 including all specials and fittings such as bends, junctions, inspectiondoors, offsets, vent cowl,accesspieces/plugs,all jointing with PVC adhesive and checking it to be water tight including chase cutting, drilling holes and fixing pipes to wall, floor,slab firmly with necessary G.I. supports, clamp, hangers, nuts, bolts,washers and making good the same etc. complete as directed by the Engineer-in-charge. 13 that the door can not be closed without removing the plug + wire and
