Tender For Beautification By 3-D Decorative Prototype Sculpture In E/M-Iv Division Area, Noida - SITC of Self Illuminated Cheery tree skelton with decorated by Neon strips,LED buls/Neon Bulbs , Trunk made of SS 304 grade perfrorated sheet -Height 10Ft properly welded in cylindrical shape with provision of fixing tree branches or arms using antitheft SS nutbolts , Branches main body construction with Al tubulae 25 mm Dia , sub branches with 12 mm dia AL tubular pipe , whole structrue painted for best look in day time as per theme colors ,Base ring of 1500 mm dia with SS tube of 40 mm and propely welded with trunk of tree, IP 65 Controller for power on/off with Surge protection device being fixed inside tree with suitbale power terminal blocks .(Civilfoundation not in scope of work) Size: 15ft(Height)x10 Ft(canopy area cover ) with two color themes. Complete in all respects as per direction of EI. AOR 2 SITC of Self Illuminated deers with many poses as solo or creating group , Construction material for framaing used as 10/12 SWG GI wire to make pose or shape , base for self standing, use of neon strips, neopn lamps , Led lamps as per color schemes, Size: 1.2 mtr x1.2 mtr , warm and white color theme Complete in all respects as per direction of EI. AOR 3 SITC of Self Illuminated equilateral trinagle shape gateway , made with 100x35 mm Al painted strucutre with various combination of LED colors ,structure welded and sealed for IP 65 operations with fixing arrnagement of same , distance between two triangles shall be 2 Meter , Complete in all respects as per direction of EI. AOR 4 Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top of suitable size of as directed by the Engineer-Incharge, complete in all respects the armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS.No. 501 a)- 10 sq. mm x 4 core 5 b)- 16 sq. mm x 4 core 6 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504 a) 10sq mm 7 b) 16 sq mm 8 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Complete in all respect as per direction of E/I. UPPWD-2018 PS - 725B 9 S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects (P.S. No. 716) 10 S/F following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fusese, isolating switch metering instrument & instrument box with CTs etc.in case of TPN complete in all respects. a) 40 A TPN PS No-807 (F) 11 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.P.S. No. 628 12 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil : AOR 13 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.: AOR 14 Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete: AOR 15 Cement Concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8.4.1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I No 5.09/ S.No 281 16 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size): AOR 17 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Cold twisted bars AOR 18 Supply and laying 90 mm dia DWC ( Double wall corrugated pipe across the road by Trenchless method (Manual). Complete in all respect as per direction of E/I. (AOR) 19 Steel work welded in built up section /framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. SOR Based on DAR 10.25.2 (AOR) 20 Demolisihing cement concrete manually/ by mechanical means including disposal of material within 50 maters lead as per direction of Engineer- in- charge Nominal concrete 1.3.6 or richer mix (i/c equivalent design mix) (AOR)
