|
| 1 | Earthwork excavation in all classes soils and subsoils except hard rock requiring blasting with initial lead and lift as initial lead of 10.0 m and lift 0f 2.00 m including re-filling the sides of foundation in layer of 15cm.thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification. |
| 2 | Supplying and filling of clean stone dustfrom approved quarry including cost of convayance of all materials to working site and all labour charge for filling, watering, ramming and consolidation by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 3 | Supplying and filling of Wellgravel from approved quarry including cost of convayance of all materials to working site and all labour charge for filling, watering, ramming and consolidation by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 4 | Cement concrete of mix 1:4:8 (one cement – four sand – eight broken stone) using40 mm ISS Hard broken granite stone jellygaugefrom approved quarry to working site including cost of convayance of all materials to working site and all labour charge for mixing, placing, compaction, finishing and curing by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 5 | Supplying and errection of centring to the sides and soffits including strutting arrangements upto 3.00m height of all pain surface for all RCC works such as beams, slabs, staircase, lintel and column in proper position by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 6 | for Plinth beam |
| 7 | for Roof and sides |
| 8 | Supplying, and fabrication of MS/RTS bar including cost of convayance of all materials to working siteand all labour charge for cutting, bending, strighting and placing inproper positionand tying with binding wire by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 9 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 10 | Brick work in following Cement Mortar 1:5 mix using Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction. |
| 11 | Brick Partition Walls using II class ground moulded chamber bricks of size 9\"X43/8\"X 23/4\"in C.M 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification. |
| 12 | Supplying, fabrication and fixing of Ornamental grill gate andIncluding cost of convayance of all materials and all labour charge for cutting, fabricating, walding etc, complete (including one coat of primer) and fixing in proper position with concrete packing by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 13 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 14 | Supplying and fixing of FRB doors of 25mm thick incuding cost and conveyance of all materials and all labour charges etc.,complete as per standard specifications. |
| 15 | Wall plastering in CM .1:5 mix 12 mm thick (one part of cement and five part of sand) including cost aand convayance of all materials to working site and all labour charge for cleaning the surface, plastering, finshing and curing by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 16 | Special Ceiling plastering in CM .1:3, mix 10 mm thick (one part of cement and three part of sand) including cost aand convayance of all materials to working site and all labour charge for cleaning the surface, plastering, finshing and curing by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 17 | Plastering in CM .1:3, mix 20 mm thick (one part of cement and three part of sand) including cost aand convayance of all materials to working site and all labour charge for cleaning the surface, plastering, finshing and curing by the direction of departmental engineers instruction etc, complete and as per standard specification. |
| 18 | Dadooing wall tilein best quality of 6mm thick of colour glazsed tile fixied in CM.1:3, mix (one part of cement and three part of sand ) 10mm thick and pointing with cement using 0.40kg per Sq.mincluding cost of conveyance of all materials at working site and all labour charge for plastering, fixing of tiles, pointing with white cement finshing and curing by the direction of departmental engineers instruction etc, complete and as per standard specification.(The colour ceramic tile should be got apporved by the Departmental Engineers before use on works) |
| 19 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 20 | Supplying and fixing in proper position of Indian Water Colset of size 580mm x 440mm, Colour glazed earthen ware of approved quality with \"P\" or \"S\" trap confirming to IS 2556 - part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5, mix (one part of lime , two part of sand and five part of brick jelly) 100mm thick and necessary connnection to cast iron soil pipes by dismantaling brick masonary, RCC roof/floor slab and making good the disturbed portion to original condition with out leakage, etc. complete complying with standard specification and as directed by the departmental officers. (The Water Closet should be got apporved by the Departmental Engineers before use on works) |
| 21 | Supplying and fixing in position colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 22 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 23 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 24 | Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed |
| 25 | Supplying, laying and jointing GI pipes of approved quality and best varity of \"B\" class pipe of the following sizes including fixing GI specialsbut excludingcost of such materials and cutting and threading of pipes and fixing to wall with necessary teakwood plugs, clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portion to original condition with necessary brick work and concrete and plastering wherever necessary with necessary scaffolding charges. the pipes are to eb painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer, etc, complete. |
| 26 | 40mm dia of GI pipe |
| 27 | 25mm dia ofGI pipe |
| 28 | 20mm dia ofGI pipe |
| 29 | Supplying, laying and jointing GI specials of approved quality and best varity of \"B\" class pipe of the following sizes including fixing GI specialsandcost of such materials and cutting and threading of pipes and fixing to wall with necessary teakwood plugs, clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portion to original condition with necessary brick work and concrete and plastering wherever necessary with necessary scaffolding charges. the pipes are to eb painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer, etc, complete. |
| 30 | 25mm dia ofGI Coupling |
| 31 | 25mm dia ofGI Elbow |
| 32 | 25mm dia ofGI Tee |
| 33 | 25mm dia of GI union |
| 34 | 25mm x 20mm dia of GI Tee |
| 35 | 25mm x 20mmdia of GI Reducer Elbow |
| 36 | 20mm GI Coupling |
| 37 | 20mm GI Elbow |
| 38 | 20mm GI Tee |
| 39 | 20mm GI union |
| 40 | 20mm x 15mm dia of GI reducer Elbow |
| 41 | 15mm Brass Chromium tap |
| 42 | 32mm dia ofGI coupling |
| 43 | 32mm dia ofGate valve |
| 44 | 32mm dia fo GI Tee |
| 45 | 32mm dia of Elbow |
| 46 | 32mmx25mm Reducer |
| 47 | Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains by the direction of departmental engineers instruction etc, complete and as per standard specification. (SD.NO.68) |
| 48 | Wiring with 2 x 1.5sq.mm(22/0.3) PVC insulated unsheathed Sc.Cu.conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A.F.T switch in flush with wall, covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point by the direction of departmental engineers instruction etc, complete and as per standard specification. (SD.NO.18) |
| 49 | Wiring with 2 x 1.5sq.mm(22/0.3) PVC insulated unsheathed Sc.Cu.conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 5A 3 pin non inter locking CS plug with painting ofsuitable colour with continous earth wire connection of 14 SWG TC wire for open PVC plug pointby the direction of departmental engineers instruction etc, complete and as per standard specification. (SD.NO.36) |
| 50 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL lightcomplete and as per standard specification. (SD.NO.83) |
| 51 | Supply and fixing of single box type of 40W 4\"-0\" flu.fitting complete with copper chock and condenser with TW round block on wall or ceiling with flu.tube with PVC unsheathed copper leads from terminals to the fittingby the direction of departmental engineers instruction etc, complete and as per standard specification. (SD.NO.88) |
| 52 | Supply and fixing of 4\" 40W single street light fitting complete with copper choke and condenser with 19mm dia GI pipe (\"B\" class) with 1 no GI bend complete on the existing post/wall with 16 A areal fuse unit on MS plate wuth PVC unsheathed Cu.unsheathed Cu.leads, with MS clamps and aluminium painting with flu.tubes by the direction of departmental engineers instruction etc, complete and as per standard specification. (SD.NO.92) |
| 53 | SupplyandfixingofTNEBmeterboardsuitablefor32Asinglephaseserviceconnectionwith32Afuseunit(500V)32Aneutrallinkandearthlink(1\"x1/8\"copperflat on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1\" thick aneither side with painting with suitable bolt and nuts for fixing the TW plank on wal lwith earth connection and interconnection with 7/20 PVC insulated copper wire from EBmetert of use unit with 1No 40Amp 30MADouble Pole RCD / RCCB (Higher End) with suitable necessary connection SD.125 |
| 54 | Supply and fixing of PVC pipes and standard specials with ISI mark etc, complete and as per standard specification. |
| 55 | 160mm PVC Pipe |
| 56 | 110mm PVC Pipe |
| 57 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
