Tender For Complete Supply, Fabrication, Erection, Commissioning And Successful Trail Of 1500/30 Of C Centrifugal Machine For Season 2025-26 , Complete Supply, Fabrication, Erection, Commissioning & Sucessful Trial Of 1500/30°Of C Centrifugal Machine For , tilhar-Uttar Pradesh

Complete Supply, Fabrication, Erection, Commissioning And Successful Trail Of 1500/30 Of C Centrifugal Machine For Season 2025-26 , Complete Supply, Fabrication, Erection, Commissioning & Sucessful Trial Of 1500/30°Of C Centrifugal Machine For Season 2025-26 , Complete Supply, Erection, Commissioning & Sucessful Trial Of 1500/30° Continuous Centrifugal Machine For C Massecuite Curing Complete With Ss Basket, 110Kwx1460 Rpm Drive Motor With Control Panel & Push Button Station, Discharge Chute, Pulp Valve Feed Unit With Ss Acceleration Cup, Cable Between Control Panel To Motor & Push Button Station And One Set Of Special Tools, Excepting Basket All Other Components Machine Are In Mild Steel Construction, One Set Of Nickel Screen (2) Staging And Structure Material.Suitable For One No. 1500/30° Continuous Centrifugal Machine With Fabrication, Erection & Commissioning. Techincal Specification:Inside Dia Of Basket -1500Mm Basket Cone Angle- 30°, Basket Speed Rpm: 1500 To 1700, Installed Drive Motor(Kw): 110 Effective Screening Surface Area(Cm2): 21500, Centre Distance (Mm): 2700, Curing Capacity Of Machine For C Massecuite: 12-14 Ton /Hr, Affiliation Magma For C Curing: 20- 25 Tph Technical Features: 1. Uniquely Adjusted Centre Of Gravity Of The Machine For Excellent Machine Stability. 2. Basket : (I) One Piece Duplex Ss Basket Integral With Basket Support. (Ii) Precise Machine Of Basket, Shaft And Its Related Parts Ensuring The Smooth Run And Longer Machine Life. (Iii) 100% Of Radiology Of Welding Joints And Casting To Give Additional Safety To Machine. 3. Bearing Housing: (I) High Tensile Forged Steel Shaft. (Ii) Compact Design Of Bearing Housing With Ample Capacity Of Bearing. 4. Lubrcation: Having The Provision For Oil Lubrication. 5. Feed Controls: (I) Having Central Feed And Acceleration System For Even Distribution Of Massecuite. (Ii) Automatic Feed Control System Governed By Motor Load For Optimum Loading Of Machine All The Time. 6. Buffers: (I) Having Excellent Four Point External Vibration Isolators Below Ideal Foot Prints To Monitor Casing. 7.Reheating System: The Machine Is Equipped With A Built In Heating Device Inside The Basket. The Steaming Arrangement For Reheating Is Having Valves To Clean The Sugar Compartment And To Introduce Steam Into Massecuite Related Device. 8. Working Screen: One Set Of Pure Nickel Chromium Plate Working Screen Slot 0.05 Mm Fitted To The System

INR 590 /-

INR 80000.0 /-

Refer document