Tender For Providing Of Security Lights At Bop Kuchlibari Along Indo Bangladesh Border (Ibb)In Aor Of 40 Bn Bsfunder Shq Bsf Jalpaiguri; 1 Providing and fixing of 07 Mtrs long hot dip galvanized octagonal pole with base plate made in single section fitted with erection of the pole on provided RCC Foundation with galvanized nuts etc as required. The following specifications should be adhered for pole & accessoriesmake:- Bajaj/Utkarsh/Crompton/Nezone a) Pole Top dia - 70mm b) Pole Bottom dia - 130 mmc)Thickness of sheet - 3mm d) Galvanized Base plate of size - 220mm X 220 mm X 12 mme) Set of foundation nut & bolts -4 nos EN 8 grade galavanized 700 mm length be supplied with galvaized nuts, washers, spacer plate & fixing template. The pole shall be fixed using double nuts. f) The set of GS anchor plates having thickness 4mm should be provided at all the connecting joints for providing support.g) The galvanization shouldbe more than 65 micron DFT both inernally and externally and pole should be designed for at least 169 km/hour max wind speedh)The steel used for manufacturing pole should conform to BSEN 10025 GRADE S 355JO and for base plate steel should be Fe 410 conforming to IS 226 / IS 2062.i) The pole topshould be suitably fixed to the bracket using Galvanized nuts and bolts of suitable length and dia. 2 Providing and installation of 3 Mtrs long medium GI pipe of 50 mm dia suitable for installation of post top lantern including drilling hole of suitable size in pipe alonwith providing of SMC junction of size250x250x160 mmfor cable termination fixing with circular GI strip clamp and MCB din rail for installation of one nos MCB , bus bar for phase & netural bolt type teminal block and earth termination, red oxide and silver paint etc as required. (Make and model of pipe and SMC junction box will be approved by Engg-In-Charge before instllation) 3 Supplying, Fabricating & fixing of GI bracket of size 100 mm X 50 mm X 4 mm thick (NS)channelhaving 750 mm length and provision of fixing 02 Nos LED flood lights with 02 nos hole, suitable size nut bolt with washer and each hole have 02 nos slot to move including provision of fixing of bracket on 70mm mm top dia octagonal poleetc.as required as per direction of engg-in-charge. 4 Providing, installation, testing & commissioningof120 watt LED floodlight with minimum 5 year warranty suitable foroperating voltage 220 V, 50 Hz made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protectionhaving Efficacy > 120 LPW including 10 KV SPD, all integrated connection with 3 core 1.5 sqmm PVC copper cable from LED light to pole junction box etc as required. Make Crompton( modal no.TFS-504-120-57-60D-HL2-GL-NBK) / Havells/ Philips/Bajaj. 5 Providing and fixing of Single arm brackt having1000 mm length including fixing on existing octagonal pole etc as required. 6 Providing, installation, testing & commissioningof45 watt, designed for all weather condtions with exellent thermal management, made with pressure die cast housing with toughened glass and high power LEDs with secondary optics and IP66 protection. Efficacy > 110 LPW 10 KV SPD included, operating voltage 220 V, 50 Hzincluding connection with 3 core 1.5 sqmm PVC copper cable from light to junction box of pole. make Crompton(Model No.CRP-417-45-57-SL-LM-NSG) / Havells/ Philips//Bajaj. 7 Providing, installation, testing & commissioningof40 watt LED post top light suitable foroperating voltage 220 V, 50 Hzfor indirect light with IP65 protection. Resistant to impact and corrosion. Glare-free and better uniformit including connection with 3 core 1.5 sqmm PVC copper cable from LED light to pole junction box etc as required. Make Crompton(Model no.CBP-610-40-57-SL-CA-NBK) / Havells/ Philips/ Bajaj / Surya 8 Providing, installation, testing & commissioningof16/20 watt crimfer certified LED flameproof battensuitable for single T8 tube of 16/20 W for gas/vapor group of llA & llB and Zone 1 &2 operating voltage 220 V, 50 Hzfor indirect light with IP65 protection LED tubesincluding LED tubes and connection with 3 core 1.5 sqmm PVC copper cable from LED light to operating point etc as required. MakeHavells( Model no.EXTN1LT8-16/20-VE)/ Philips/ Bajaj 9 Providing and fixing of FRP junction boxhaving size 155x155x100 mm with 4 way bakalite connector strip with clamp including fixing on existing octagonal pole etc as required. 10 Supplying, installation, testing & commissioningofhigh intensity, long focus range-800 Mtr, multi functional, auto rotatable, LED search light, 1 X 250 watt, narrow beam-5 degree, LM6 housing with heat sink, round in shape, dia 400 mm, operating voltage 90V-300V AC 50hz, PF >0.95, THD <20%, CCT: 5500K-6000K, CRI >70, Optics used-PMMA/PC lens, LED efficacy >140 l/w, average lux level at 10 meter >8000 with circle of approx 1 meter, toughened clear glass with silicaon gasket, driver efficiency >95%, over volt/ under volt / short circuit protections, confirming to LM79, LM80, IK07, IP66, Lux level report and BIS. This search light will easy to installed on a rotating stang having such designed that the light could be auto rotate 360 degree continuously (overnight) in the horizontal plane with option vertical tilting by motor upto 45 degree & covered by weather proof die cast fiber box with provision of 4 nos. foundation hole for installation. A wall-mounted wired control panel (consist of MCB, V-meter, fuse, LED indicator andhaving buttons for speed controller (1-10 rpm), auto/ manual, rev./forw and up/down buttons) is supplied for safe operation, Other details are as per annexure-A. Model No.:MRSL-LRFLL-25PC25, Make: KALIN 11 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (A) 63 mm dia (OD-63 mm & ID-51 mm nominal) 12 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (A) 63 mm dia (OD-63 mm & ID-51 mm nominal) 13 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL/HDPE.(A) Upto 35 sq. mm 14 Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 25 sq. mm (28 mm) size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. 15 Supplying and making end termination with brass compression gland and aluminium lugs for 2 X 16 sq. mm (22 mm) size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. 16 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required( 50 mm dia ) 17 SITC of outdoor type feeder panel double door type made of 2mm thick CRCA sheet of desired size with 350mm depth suitable for 415 Volt, 3 phase 50 hz power supply complete with hinged doors, having locking arrangement and providing detachable gland plate of thickness 3mm at the bottom, earth bar/ stud, cable alley, Aluminium busbar of suitable size as per CPWD norms as required.. All sheet matel parts separately chemically treated with 7 tank treatment process and the panel shall be finished with powder coating in Siemens Grey shade RAL 7032 and supplied with suitable pedastalframe with 4 Nos 600mm long legs with suitable apron all around. The Panel Shall beembeded in 1:3:6 cement concrete foundation of required shape and size 30 cms below ground levelincluding finishing etc as required as per direction of engg-in-charge. (Make of panel - CPRI approved only) (Drawing will be approved from department before fabrication) 18 Supply installation testing and commissioning of 100, 25kA breaking capacity Four Pole MCCB having Ics = 100%Icu with thermal magnetic based releases,interconnections with suitable size aluminium bus bar and suitable size spreader link assemblyetc complete as required as per direction of enggineer-in-charge. make : C & S/ Legrand/ Schneider / Siemens/ABB/L&T 19 Supplying and fixing 40 amps rating, 240 volts, B curve, doublepole mcbwith DIN rail suitable for non inductive load of following poles in the feeder pillarboxcomplete with connections, testing and commissioning etc. as required. Make:-L&T/Havells/Schneider/C&S 20 Supplying and fixing MCB SPN 6 to 32 amps rating, 240 volts, B curve, Single pole with DIN rail suitable for inductive load of following poles in the internal junction box of the GI pole complete with connections, testing and commissioning etc. as required. Make:- L&T/ Havells/ Schneider 21 Supplyinyinstallation testing and commissioning of 100 AmpFour way wall mountedbus bar interconnections with suitable size aluminium bus bar and suitable size spreader link assemblyetc complete as required as per direction of enggineer-in-charge. make :Havells /Legrand/ Schnieder / Siemens/ABB/L&T 22 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt ) as required. 23 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation andre-filling as required 24 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. 25 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), ncluding dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil 26 Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres. 27 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 28 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 29 Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns 30 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 31 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 32 Add Cost index @ 10.28% on DSR( Civil items) 2023 item srl no.16,25,26,27,28,29,30 & 31
