Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #50412169

Tender For Provn Of View Cutters, Plinth Protection, Spikes And Concertina Coil At Certain Location At Afs Yelahanka.

Issued by Statutory Bodies & Commissions/Committees · yelahanka, Karnataka
Tender Value
43.63 Lakhs
Estimated cost
Bid Submission
19 Aug 2025
0 days left
EMD
87260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
yelahanka → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Provn Of View Cutters, Plinth Protection, Spikes And Concertina Coil At Certain Location At Afs Yelahanka.

BOQ

Name of Work: PROVN OF VIEW CUTTERS, PLINTH PROTECTION, SPIKES AND CONCERTINA COIL AT CERTAIN LOCATION AT AFS YELAHANKA.
Sl. No. Item Description
1M&L for excavating in post holes (or similar holes) in Hard/Dense soileach n. exc 0.5 cum, getting out, returning, filling in and ramming earth orbroken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed.
2M & L for plain cement concrete1:3:6 type C-2 (Using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
3M & Lfor framed workconfirming to (Fe-410 Gde 250 quality A) as in doors or gates of angle or other section with gusset plates, rails, spike, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails anduides) and hanging; also fastening and fixing completeall as specified and directed.
4Supply only Chain link fencing made out of 3.15 mm dia galvanised iron wire of mesh of size 50mmx50mm made up to into mattress or cages complete all as specified .
5Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire completeall as specified and directed.
6S&F mild steel round bars 10mm dia and overof Fe-410-W (Gde E-250) quality A or Fe 290 (Gde E-165), cut to length , bent to shape required, including cranking, bending for hoopingas in securing bar complete all as specified and directed.
7S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal orquare nut, n exc 5cm long dia of shank diameter of neck in 11 to 15 mm complete all as specified and directed.
8S&F posts and struts in fencing including cutting tops to shapes as directed, drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe-290 Gde E-165) complete all as specified and directed.
9M&L for preparing new steel surfaces ofand applying two coats of synthetic enamel paint over a coat of red oxide primer of any description over 10cm in width or girth not otherwise described complete all as specified and directed.
10All as per Item No.09 but on steel surfaces of width n exc 10 cm complete all as specified and directed
11M & L Pre-cast cement concrete block masonry of type C1, 1:3:6 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
12Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
13M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete wall surface to be finished even and smooth without using extra cement by mixing with liquid water proofing compound complete all specified and as directed. Note:- WPC will be measured and paid seperately.
14Supply only liquid water proofing compound complete all specified and as directed.
15M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
16S&FGalvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia, barbs at 75mm spacing as in fencing and straining and fixing to any type of standard rails/ straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete as specified and directed (each line of wire to be measured separately).
17S&F Galvanised mild steel concertina coil fencing of 600mm dia, centre to centre barbs distance 48mm, thickness of strip 0.5mm, length of barbs 10.5mm, Dia of spring wire 2.5mm, No. of spiral (No of turn) 50/51 per coil clip per spiral 5 Nos, weight not less than 8.50Kg/coil (recommended coil strech length 6 mtr) and conforming to IS and as per manufacturers instruction and laying and secured with barbed wire/iron angle by using necessary securing clips complete all as specified and directed.Note : Measurement taken on effective length of fencing and not length of coil.
18S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
19S&FPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
20Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deepin soft/loose soil and getting out complete all as specified and as directed.
21M&L for Hard core of broken stone/boulders, broken to gauge n exc 63mm complete all as specified and as directed.
22M&L for 100mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and as directed.
23M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
24M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness,M-35 Grade with grey cement and pigment complete all as specified and directed.
25Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

AI Tender Summary

OUR REF NO 50412169
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.63 Lakhs
LAST DATE 19-08-2025
Authority
Authority Name Military Engineer Services
Work Description Tender For Provn Of View Cutters, Plinth Protection, Spikes And Concertina Coil At Certain Location At Afs Yelahanka.
Basic Detail
Tender No 8408/E8
Bidding Type Tender
Location
City yelahanka
State Karnataka
Key Dates
Publish Date 29 Jul 2025
Submission Date 19 Aug 2025
Open Date 26 Aug 2025
Finance
Tender Value 43.63 Lakhs
Tender Fee 500
EMD 87260
Exemption Available
Document List
Tender8408.pdf
Tendernotice_1.pdf
9a921a68-00f1-4e15-873e-8509bc33306a.html
BOQ_809607.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 29, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 19, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 26, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tender8408.pdf

pdf

Tendernotice_1.pdf

html

9a921a68-00f1-4e15-873e-8509bc33306a.html

xls

BOQ_809607.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders