Tender For Addition Alteration To Bldg No Bh 13 Of Hospital At Bengdubi Mil Stn Under Ge Bengdubi
Tender Value
87.37 Lakhs
Estimated cost
Bid Submission
06 Sep 2025
0 days left
EMD
1.56 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bengdubi → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addition Alteration To Bldg No Bh 13 Of Hospital At Bengdubi Mil Stn Under Ge Bengdubi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2025 | Date Corrigendum | Date | 02-Sep-2025 |
| 2 | 26-Aug-2025 | Date corrgiendum1 | Date | 06-Sep-2025 |
| 3 | 26-Aug-2025 | BOQ | BOQ | 06-Sep-2025 |
| 4 | 22-Aug-2025 | Tender documents | Other | 02-Sep-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing , fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m etc brick wall built in cement mortar complete all as specicfed |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed. |
| 3 | M& L for light shade vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) of approved size, area of eachtilenot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 4 | M& L for light shade vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) of approved size, area of eachtile not exceeding 0.36 sqm, in skirting/vertical surfaces etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 10mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 5 | M& L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 20mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 6 | M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM (1:3), complete all as specified andand as directed. |
| 7 | Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc and brushingneat cement slury with 3kg/sqm, complete all as specified and as directed. |
| 8 | M&L forcoloured tiles of size 600mm X600mm x16 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tiles ,including 15mm thick cement mortar backing coat in CM (1:6), complete all as specified andand as directed. |
| 9 | M& L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 10 | M& L for coloured Non - skid Ceramic coloured tiles 7 to 8 mm thick , area of eachtile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/Vertical surface etc. set and jointed in neat cement slurry and pointed inwhite or coloured cement mixed with pigments to match with the shade of tiles, over and including 10mm thick in cement morter 1:3 complete all as specified and as directed. |
| 11 | M&L for 18 to 20 mm thick machine cut, pre-polished Black Jet, premium quality, granite stone slab, in skirting,dado etc laid over and including 15mm thick CM (1:4) screed bed, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone including rounding / moulding the edges half round, complete all as specified and directed. |
| 12 | M&L for 40 mm thick (average thickness), PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as infloor/Subbase finishing cement concrete surfaceeven & smooth without using extra cement, complete all as specified and directed. |
| 13 | Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed. |
| 14 | M&L forBrickwork with fly ash Bricks(old size), straight or curved on plan exc 6m mean radius built in Cement morter (1:6), complete all as specified and directed |
| 15 | M&L for brick work with fly ash Bricks(old size), straight or curved on plan to any radius built in CM (1:4) as in half brick thick walls, complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or concrete surfaces etc,including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed.Note:- WPC shall be measured and paid seperately. |
| 18 | M&L for rendering 15 mm thick in cement mortar (1:6), on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 19 | Supply only liquid water proofing compound, complete all as specified and as directed. |
| 20 | M&L for rendering 5mm thick in CM (1:3) on concrete surfaces of ceiling/Chajja/Facia of chajja etc, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 21 | M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed. |
| 22 | M&L preparation of old painted surfaces of wooden surfacesof any description not otherwise described over 10 cm width or girth and applying Onecoat of synthetic enamel paintcomplete all as specified and as directed. |
| 23 | M&L for preparing newPlasterd surfaces of walls duly applied2mm wall care Putty and there after applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed. |
| 24 | Material & Labour for preparation of new surface on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 3mm thick wall care puttyon new surfaces complete all as specified and as directed |
| 25 | M&L for preparation of new plastered surfaces of ceilingand applying three coat of white washing, complete all as specified and directed . |
| 26 | Complete removal of old existing treatment plastered surface of walls,material and labour for preparation of new surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 3mm thick wall care putty complete all as specified. |
| 27 | M&L for complete removal of existing treatment and applying two coat ofwhite wash on ceilling complete all as specified |
| 28 | M&L for complete removal of existing treatement of internal wall and appying two coat of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick wall care puttyetc complete all as specified and as directed |
| 29 | M&L for Reinforced cement concrete (Nominal Mix) type A-1 (1:1.5:30 (20 mm graded crushed stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like in shelves and the like ®in Roof Beams and slabs. |
| 30 | M&L for use and waste of Formwork in rough finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc all as specified and directed. |
| 31 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed. |
| 32 | Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc,disposing off the retrieved debris outsite the premises, complete all as specified and as directed. |
| 33 | Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc,disposing off the debris outsite the premises, complete all as specified and as directed. |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,complete all as specified and shown on drawing for SI No. 08095 on Srl Page No. 180 of SSR (Part-II) and as directed. |
| 35 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed. |
| 36 | S&F 100mm size butt hinges,extruded aluminium alloy with galvanised MS sheet hinges pin anodised , complete all as specified and as directed. |
| 37 | S&F Aluminium anodised barrel towerbolt, 150 mm long of extruded section, complete all as specified and as directed. |
| 38 | S&F150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed. |
| 39 | S&F standard powder coatedaluminium sectionand shall be approved by Garrison Engineer as in frame for partition,door,windows,ventilators etc cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth and particle board, etc complete all as specified and directed.Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment.(ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories required to be provided for partition as per directions of Engineer-in-chargeshall be provided but weight for the same shall not be considered and no extra cost will be paid. |
| 40 | Supplying and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directed |
| 41 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc of 25 mm bore complete all as specified and as directed |
| 42 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 43 | M&L for Cutting holes in exc half brick but not exc onebrick walls in cementmortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed. |
| 44 | Supply only 4.80mm thick sheet glass ofordinary quality and glazing withor Silicon beading/screw to aluminium frame or steel framein squaresexc 0.50 sqm in each pane complete all as specified and directed |
| 45 | S&F 10 mm thick toughenedglass as in hinged doors,partition automatic doors and similar work incl cutting shape,drilling holesor Silicon beading to aluminium frame or steel framein squaresexc 0.50 sqm in each pane. complete all as specified and directed |
| 46 | S&FDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.complete all as specified and directed |
| 47 | S&F Mortice lock, made with Brass of vertical type insize75 mm with 2 lever and fixed in Aluminium Frame.complete all as specified and directed |
| 48 | S &F Collapsible steel gate top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handle etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed. |
| 49 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre complete all as specified and directed |
| 50 | S& F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 51 | Supplying and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2ndclass soft wood fillets, or metal frame work and reinforced with G.I. wire mesh.complete all as specified and directed. |
| 52 | S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality \"B\" includng welding or riveting etc complete all as specified and as directed |
| 53 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 54 | S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality,white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed. |
| 55 | S&F in repair vitreous china wash basin, 1st quality, white, flat back, approx size 550x400mmexcluding taps but including 32 mm bore brass chromium platedwaste fittings, 32mm bore PVC waste pipe,MS brackets, complete all as specified and as directed. |
| 56 | S&F in repair counter top wash hand basin white flat of size 545X545X180mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long andMS brackets complete all as specified and as directed. |
| 57 | S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed |
| 58 | S & F Vitreous China urinals, Half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 59 | S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all asspecifiedand as directed |
| 60 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe, Bore dia of pipe 15 mm, and fixed all as specified and as directed |
| 61 | S&F in repairs bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed. |
| 62 | S&F in repairs stop valves, fancy type,cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionsof 15 mm bore,complete all as specified and as directed. |
| 63 | S&F in repair PVC connection 15 mm size with PTMT nuts of each end, length 450 mm, complete all as specified and directed. |
| 64 | S&F in repairs 600x 450mmbevelled edge mirror of decorative type, selected qualitymounted on and including 6 mm thick commercial plywood and provision of wooden plugs with chromium plated brass screws and cup washers for fixing, complete all as specified and as directed. |
| 65 | S&F laying of CPVC pipes SDR 11& plain CPVCSDR 1120mm outer dia laid in trenches/wall complete all as specifed |
| 66 | S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings,and including taking down complete all as specified and as directed. |
| 67 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed. |
| 68 | S&F in repairstwo angle cock , fancy type, cast copper alloy, chromium plated with crutch, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed. |
| 69 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.Complete all as specified and as directed. |
| 70 | S&F15 mm Stop valves (concealed type long shank), cast copper alloy with chromium plated,fancy type long shunk and pipe (concealed)screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed. |
| 71 | S&F CPVC brass elbow for 20 mm outer dia of pipe etc complete all a specified |
| 72 | S&F Health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete alla specified |
| 73 | S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 74 | S & F in repair PVC (SWR) pipes110mm bore single socketed, in any length with rubber ring joints, fixed in wall/ floor with access door complete all as specified and as directed. |
| 75 | S&F 110mm bore PVC (SWR) bends (any radius) with and including rubber ring with access door, complete all as specified and directed. |
| 76 | S&F 110mm bore PVC (SWR) `P\"or \"S\" trape complete all as specified and directed |
| 77 | S & F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed in wall with access door complete all as specified and as directed. |
| 78 | S&F 75mm bore PVC (SWR) bends (any radius) with and including rubber ring with access door, complete all as specified and directed. |
| 79 | S & Fin repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 80 | S&F toilet paper holder with flat recessed type stainless steel / chromium plated complete all as specified and as directed |
| 81 | S&F in repair rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoistedin position, including float valve,complete including dismantling of existing one all as specified and as directed. |
| 82 | S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 15mm bore (Minimum weight 210 grms), complete all as specified and as directed. |
| 83 | S&F in repair 20mmgun metal globe or gate wall with iron wheel head screwd both end for iron pipe and etc complete all a speified |
| 84 | S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm fixed in tank caging including welding, riveting, framing etc complete all as specified and as directed |
| 85 | Providing, cement concrete tye B-0 (1:2:4) (12.5 mm graded aggregate in roof kerbs, mud stops, rounded or chamfered on edges, parapets and railings upto 60 cm in height, copings,holdfast, kneelers etc all as specified and directed. |
| 86 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing etc complete all as specified |
| 87 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified |
| 88 | Providinf and fixing \"\" RAJSHRI\"\" brand factory made uPVC white color sliding window three track madeof extruded profiles with wall thickness of 2.5 mm (+- 0.2mm). Rajshri window profile with hollow section with multi chamber, frame (109 mmx 52mm). Sliding slash (42 mm x 56 mm) , sliding interlock (One vertical length in each shutter). Glazing bead (25 mm x 16 mm) will he metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. Making arrangement for fixing of hardware 1.2 mm EPDM gasket and 1.0 +- mm thick galvanized steel frame to be inserted in required profile, frame will be fixed to the wall with 8 mm x 1000mm long fasteners. Touch lock of zinc alloyed ( white powder coated), steel roller system including 5 mm thick glazing with selected quality glass, wool pile foe sliding sash and interlock etc complete all as specified. |
| 89 | S&F White coloured ventilator frame RPC-50-01 reinforced 1.2mm thickness including frosted toughned glass of thickness 4 mm including all fittings etc. complete all as specified and directed |
| 90 | M&L for point wiring for one light point/ one fan point/ one exhaust fan controlled byone way switch 5 Amp swith 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including factory made anodized pressed steel sunken boxes (Having wall thickness not less than 1.22 mm for boxes suitable size and beyond that the wall thickness shall be not less than 1.63 mm), concealed type with and including 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM 1:3 to match with the adjoining surfaces , complete all as specified and as directed. |
| 91 | All as per item No 91 here-in-before but for one 3pin 5 Amp switch socket outlet, controlled by one switch , complete all as specified and as directed. |
| 92 | All as per item No 91 here-in-before but for one 3pin 5 Amp switch socket outlet, same boardcomplete all as specified and as directed. |
| 93 | All as per item No 91 here-in-before but for one bell point controlled by one bell push complete all as specified and as directed. |
| 94 | All as per item No 91 here-in-before but for one light point controlled by two, 2-way switch 5 Amps, complete all as specified and as directed. |
| 95 | All as per item No 91 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed. |
| 96 | S&F Modular switch 1 way 10A, 1 module, complete all as specified and directed. |
| 97 | S&F Modular switch 2 way 10A, 1 module, complete all as specified and directed. |
| 98 | S&F Modular Bell push, 10A, 1 module, flush type complete all as specified and directed. |
| 99 | S&F Modular switch 1 way 16A, 1 module, complete all as specified and directed. |
| 100 | S&F Modular Switch socket combination , 2 in 1, 2/3pin, 10 Amp,complete all as specified and as directed. |
| 101 | S&F Modular Switch socket combination, 2 in 1,3pin,6/ 16 amp, complete all as specified and as directed. |
| 102 | S&F Modular Fan step regulator, 120W, 2 module, complete all as specified and directed. |
| 103 | S&F Modular blank plate, 1 module, complete all as specified and directed. |
| 104 | S&F Modular type white cover plate with 2 module, complete all as specified and directed. |
| 105 | S&F Modular type white cover plate with 3 module, complete all as specified and directed. |
| 106 | S&F Modular type white cover plate with 6 module, complete all as specified and directed. |
| 107 | S&F Modular type white cover plate with 8 module, complete all as specified and directed. |
| 108 | S&F Modular metal flush box, 1/2 module, complete all as specified and directed. |
| 109 | S&F Modular metal flush box, 3 module, complete all as specified and directed. |
| 110 | S&F Modular metal flush box, 6module, complete all as specified and directed. |
| 111 | S&F Modular metal flush box, 8module, complete all as specified and directed. |
| 112 | S&F sheet metal enclosure for MCBs DBs, SPN, 12 waywith 100Amps rated bus bar 240 volts, IP 43 & Ik 09Double Door aluminium- Zinc coated hardware for rust proof longevility with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the bricks/stone masonaryetc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed. |
| 113 | S & F for MCB Single pole and neutral rated capaity 40-63 Amps , 240 Volts breaking capacity 10 KA \"C\" curve contract indication for individual pole, and designed based on advanced current limiting hammer trip mechanismcomplete all as specified and as directed. |
| 114 | S & F for MCB Single pole and neutral rated capaity 5 to 32 Amps , 240 Volts breaking capacity 10 KA \"C\" curve contract indication for individual pole, and designed based on advanced current limiting hammer trip mechanismcomplete all as specified and as directed. |
| 115 | Supply and fixing LED tube light batten type made of CRCA sheet with decirative end caps suitable with ultra bright glass LED tube light 1x18/20 watt T8 type single side connection complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/celling incl fittings accessories and connecting up with twin core fexible copper conductor cable suitable size all as specified. |
| 116 | S&F energy saving BLDC ceiling fan; 5 star rating, Type of motor - Brush Less DC Motor (BLDC) and Input Power - 32 to 35 Watts with full speed and reduced power consumption with reduced speed technology, Voltage- 90-300V AC, 50Hz, single phase, RPM - 340 to 375 rpm, Blades- Decorated, Sweep - 1200 mm, Air delivery - Not less than 210 CMM with service value 6.00 BEE and Colour - Glow white/ Toast Brown/ Gloss Black or others as approved by GE,complete all as specified and as directed. |
| 117 | Supply and fix exhaust fan of 250 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed. (Note: Cost of suitable opening wall for fixingexhaut fan is deemed to be included in overall rate quoted). complete all as directed and specified. |
| 118 | S &Fwall mounted LED tube light fitting 10 watts batten for surface, anodized extruded aluminium housing, high transmisivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with allaccessories interially pre-wired and necessay mounting arrangements, provision of new 3core multistranded copper counductor of size 23/0.193 form ceiling rose to fiting completeall as specified as directed. |
| 119 | S&F 2 module socket with shutter 25Amps, 240 volts including Modular Metal Flush box and cover plate, complete all as specified and directed. |
| 120 | S&F 2 module starter switch25Amps, 240 volts including Modular Metal Flush box and cover plate, complete all as specified and directed. |
| 121 | Supply and fix in replacement LED down lighter with aluminium housing surface mounted round/ square type(1x1) 24vwatt suitable driver & all accessories fixed on ceiling/ wall complete all as specified and directed. |
| 122 | Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm and one run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as \"1RM\". |
| 123 | Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm and one run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as \"1RM\". |
| 124 | M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm diaby means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (Medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, complete all as specified.Note: GI earth wire 4sqmm dia and 15mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contrator. |
AI Tender Summary
Tender Timeline
Aug 26, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 02, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 06, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 06, 2025
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 02, 2025
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 06, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 08, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender