|
| 1 | Charpoy GI Pipe Double Bunk |
| 2 | Removing old unserviceable plywood of double sleeping bunk/charpoy and S & F newmarine plywoodof12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green plyincluding fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and complete all as specified and directed. |
| 3 | Removing old unserviceable Stiffener & S & F new Stiffener of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete all as specified and directed. |
| 4 | Removing old unserviceable legs & S & F new legs of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete all as specified and directed. |
| 5 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and applying Two coat of synthetic enamel painting with Silver Shade as process spray paintingcomplete all as specified and directed. |
| 6 | Charpoy OR steel (FD/E6/MAP-II/01) |
| 7 | Removing old unserviceable plywood of Charpoy OR steel and S & F newmarine plywoodof12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green plyincluding fixing with nut and bolt in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge |
| 8 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and applying Two coat of spray painting of Olive Green/Black Shade of approved quality paint complete all as specified and as directed. |
| 9 | Charpoy GI pipe ( Drg No FD-220) |
| 10 | S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.98 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy complete all as specified and directed. .Make : Jindal/Sintex/Tata |
| 11 | Conversion of 32 mm dia long rail obtained from item No 10 above two short rail after cutting and two short rail threading both ends and fixing to 3 way 32 mm dia existing elbow complete all as specified and directed. . |
| 12 | Conversion of 32 mm dia short rail obtained from item No 11 above two leg after cutting and two leg threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe complete all as specified and directed. . |
| 13 | S & F in repairs 3 way 32 mm dia GI elbow ISI marked complete as per specified. |
| 14 | S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified. |
| 15 | S & F in repairs 12 mm BWR phenol bonded commercial plywood of existing size including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood complete all as specified and directed. . Make - Archid Ply/Green Ply/CenturyPly |
| 16 | S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffener shall be fitted for support of plywood complete all as specified and directed. . |
| 17 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and applying Two coat of synthetic enamel painting with Silver Shade as process spray painting complete all as specified and directed. |
| 18 | Book shelf large steel / Rack Steel Adjustable/Rack steel off sizes.(DRG No - FD-81(M)/1023/ FD-69(M)/FD-1038) |
| 19 | Preparation of old paintedinner and outer steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 20 | S & F shelf made of 1.0 mm thick shelf nut & bolt tighted/ welded/rivetedincluding dismantling unserviceable one all as specified and as directed and painted with one coat of synthetic emamel paint over a coat of primer of directed shade by Engr-in-Charge. |
| 21 | S & F angle made of 1.6 mm thick L shape angle alongwith nut & bolt tighted/ welded/riveted including dismantling unserviceable one all as specified and as directed and painted with one coat of synthetic emamel paint over a coat of primer of directed shade by Engr-in-Charge. |
| 22 | Almirah steel med (FD 67/1032) |
| 23 | S & F Lock 7 lever with duplicate keys components of Almirah steel medincluding dismantling unserviceable one all as specified and as directed.(Make of Lock- Harrison/Rina/Link) |
| 24 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel medincluding dismantling unserviceable one all as specified and as directed. |
| 25 | S & F 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and directed. . |
| 26 | S & F leg made of 1mm thick CRCA sheetduly welded/rivetedincluding dismantling unserviceable one all as specified and as directed and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer complete all as specified and directed. |
| 27 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 leverlock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primerinside and outside Two coat of spray painting of Hammertonepaint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting). |
| 28 | S & F shelves made of 1mm thick CRCA sheetwelded/riveted and painted with one coat of synthetic emamel paint over a coat of primer of directed shade by Engr-in-Charge. |
| 29 | Preparation of old paintedinner steel surfaces by scraping with emery , cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 30 | Preparation of old painted outer steel surfaces by scraping with emery, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved qualityincluding dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 31 | Almirahlarge Steel(FD-67/1031, FD/E6/MAP/18) |
| 32 | S & F Lock 7 lever with duplicate keys components of Almirah steel medincluding dismantling unserviceable one all as specified and as directed.(Make of Lock- Harrison/Rina/Link) |
| 33 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel medincluding dismantling unserviceable one all as specified and as directed. |
| 34 | S & F 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and directed. |
| 35 | S & F leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer complete all as specified and directed. . |
| 36 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 leverlock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primerinside and outside Two coat of spray painting of Hammertonepaint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting) |
| 37 | S & F shelves made of 1mm thick CRCA sheetwelded/riveted and painted with one coat of synthetic emamel paint over a coat of primer of directed shade by Engr-in-Charge . |
| 38 | Preparation of old paintedinner steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 39 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved qualityincluding dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 40 | Steel Almirah Locker with two Partition 91cmX48cmX181.5cm ( FD 11 GE 871 EWS) |
| 41 | S & F Lock 7 lever with duplicate keys components of Almirah steel medincluding dismantling unserviceable one all as specified and as directed.(Make of Lock- Harrison/Rina/Link) |
| 42 | S & F Handle 100 mm size chromium plated Heavy components of Almirah steel medincluding dismantling unserviceable one complete all as specified and as directed. |
| 43 | S & F 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer complete all as specified and directed. . |
| 44 | S & F leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer complete all as specified and directed. |
| 45 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 leverlock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primerinside and outside Two coat of spray painting of Hammertonepaint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing.Note for steel painting;- All steel surface shall be done with spray painting) |
| 46 | Preparation of old paintedinner steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 47 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved qualityincluding dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 48 | Removing the existing unserviceable 20mm dia conduit pipe, S & F new 20mm diaconduit pipe of SS match the existing as specified and as directed in bothcompartment all as specified and as directed. |
| 49 | Locker Bed Side Steel (FD-1029) |
| 50 | S & F Handle 100 mm size chromium plated Heavy components of Locker Bed side steelincluding dismantling unserviceable one all as specified and as as per direction of Engr-in-Charge. |
| 51 | S & F Hasp & stapplechromium plated components of Locker steelincluding dismantling unserviceable one all as specified and as directed. |
| 52 | S & F leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & qualityover a coat of primer complete all as specified and directed. |
| 53 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size, Haps and Staple of approved quality, painting with one coat of synthetic enamel paint shade as directed by Engr-in-Charge over a coat of primerinside and outside and Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) shall be applied after preparation of surface all as specified and shown on drawing.Note:- All steel surface shall be done with spray painting. |
| 54 | Removing the existing worn out side holder with 20mm dia aluminium conduit pipe of locker bed side steel and S & F new side holder with 20mm alluminium conduit pipe as per existing.Shape and size shown on drawing all as specified and directed by Engr-in-Charge. |
| 55 | Preparation of old paintedinner steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 56 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved qualityincluding dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 57 | Locker Bed Side Steel( SKD-562) |
| 58 | Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge. |
| 59 | Removing theexisting unserviceable handle and S & F new handle chromium plated 100mm in Heavy pattern all as specified and directed by Engr-in-Charge |
| 60 | 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer. |
| 61 | Removing the existing worn out side holder and hangingconduit pipe of locker steel and S & F of new side holder and hanging conduit pipe as per existing shape and size shown on drawing and all as directed by Engr-in-Charge. |
| 62 | Taking down old unserviceable existing lock of locker steel and S & Fnewlock 7 lever duplicate key all as specified and directed by Engr-in-Charge. |
| 63 | Removing the existing unseviceable hingesand S & F new hinges duly welded as per existing shape and size all as specified and directed by Engr-in-Charge. |
| 64 | S & Fdoor shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 leverlock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primerinside. And outside Two coat of spray painting of Hammertonepaint ( pattern of hammertone shall be 0.06gr silicon/kg) Shall after preparation of surface complete all as specified and shown on drawing. Note :- All steel surface shall be done with spray painting. |
| 65 | Preparation of old paintedinner steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 66 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved qualityincluding removal of dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 67 | Book Shelf open/closed small steel, (FD-69(M)) |
| 68 | Materials and labour for removing denting wherever required making the surface smooth after removing old paint by scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting on inside & outside with OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint for complete all as specified and as directed. |
| 69 | Material and labour for replacement of existing unserviceable shelf and clamps with new shelf and clamps made out of 20 gauge MS sheet made to shape as per existing shelf duly painted with two coats of synthetic enamel paint in OG/grey shade over a coat of red oxide primerall as specified and as directed. |
| 70 | Table office officer/clerk steel (FD-84/1003,1004 ) |
| 71 | S & F following components of Table office officer/clerk steelincluding dismantling unserviceable one all as specified and as directed. Drawer made of 1mm CRCA sheetincluding painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system complete all as specified and as directed.. |
| 72 | Leg/stiffener25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat ofprimerall as specified and as directed. |
| 73 | Taking down old unserviceable existing lock of Table office officer/clerk steel and S & Fnewlock 6 levers with duplicate keys all as specified and directed by Engr-in-Charge. |
| 74 | Side/back panel made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade of approved quality over a coatof primer both inside and outside including preparation of surfaces complete all as specified and as directed.. |
| 75 | Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;-(i)Table office officer complete all as specified and as directed. |
| 76 | Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;- (ii)Table office Clerkcomplete all as specified and directed. |
| 77 | S & F PVC shoe of table including dismantling unserviceable one all as specified and as directed. |
| 78 | Preparation of old painted steel surfaces by scraping with emery paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed |
| 79 | Table 3\"X2\" Steel with/without drawar |
| 80 | Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated particleboard /Particle Board , one side laminated finish including provision of 4mm thick teak wood beading all as specified and directed |
| 81 | Preparation of old painted steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/Berger approvedby Engr-in-Charge. |
| 82 | Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Chargeshape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs |
| 83 | Chair Revolving with Arms(TP)/ Chair high back mesh tourision bar mech, make - Eezy model - 280/Chair high back recliner wooden base arms, make - eezy model - 210,Chair revolving steel w/arms FD- 75 (m)/Chair Computer Make Eezy |
| 84 | Removing old unsv Hydraulic mechanism and S & F new Hydraulic mechanism of approved quality complete all as specified. Make of Hydraulic Mechanism :-CSS Power Hydraulic P CHAIR Power Hydraulic and equal |
| 85 | Removing old unsv castor wheel andS & F new castor wheel of approved quality completeall as specified. Make of Seltos/Breewell & PP Chair |
| 86 | Removing old unsv hand restandS & F new one as existing shape and size should be fitted with suitable nut bolt/welding with all iron surface directed to view when placed in position shall be painted with enamel paint using spray machine to match the colour and provision of leatheritte raxine wherever required rest all as directed of approved quality directed by Engr-in-Charge make of : PP Chair/Rajchief and Breewell |
| 87 | Removing old unserviceable back framefrom Chair Revolving and S & F new back complete as existing moulded PU foam seat duly covered with finest quality rexine/tepstray cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge |
| 88 | Removing old unserviceable Seat frame from Chair RevolvingS & F new Seat frame complete as existing moulded PU foam seat duly covered with finest quality rexine/tepstray cloth complete of existing size, shape, pattern complete all as specified and shown on drg and directed by Engr-in-Charge |
| 89 | Table dinning ORs steel with Aluminium Top |
| 90 | S & F Leg/ centrestiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion of Table dinning ORs steelincluding dismantling unserviceable one all as specified and as directed. |
| 91 | Table top in repair made of 18 mm hard block Board covered with 1 mm Aluminium Sheet of approved quality Make of Board : Archid Play,Green Ply, Century Ply |
| 92 | Preparation of the old painted steel surfacesby scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green/Black shade of approved quality complete all as specified. |
| 93 | S & F in repair PVC shoe in Table dinning ORs steel with Aluminium Top complete all as specified. |
| 94 | Box kit steel (FD-98(M)) |
| 95 | Materials and labour for removing denting wherever required making the surface smooth after removing old paint by scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting at inner and outer surface in OG/Grey/white/ Black shade (as required) with two coats of 1st quality synthetic enamel paint complete all as specified and as directed. |
| 96 | Material and labour for replacement of haps and staples of box kit steel with new haps and staples of Mild steel pressed, heavy duty to be fixed with machine screws and bolts of required size all as per existing pattern specified and as directed by Engineer-in-Charge. |
| 97 | Material and labour for replacement of Hings of box kit steel with new Hings of Mild steel pressed, heavy duty to be fixed with machine screws and bolts of required size all as per existing pattern specified and as directed by Engineer-in-Charge. |
| 98 | Chair tubular Steel with/ without arms (DRG No- 75(M):- |
| 99 | Removing the old cane from seat of chair tubular Steel and re-weaving with new 2mm wide white colour virgin cane in Godrej pattern as shown in drawing and complete all as specified and as directed by the Engineer-in-Charge. Make-Shah/Primiere/Arihant. (DRG No - FD-75(M)) |
| 100 | All as per Srl item No. 99 above but back of Chair CB Steel with arms. (DRG No - FD-75M) |
| 101 | All as per Srl item No. 99 here-in-before but seat of Chair CB Steel without arms. (DRG No - FD-75M) |
| 102 | All as per Srl item No. 99 here-in-before but back of Chair CB Steel without arms. (DRG No - FD-75M) |
| 103 | Materials and labour for replacement of unserviceable arm to chair CB steel with new arms shall be made of best quality Ist class hard wood teak, free from knots, infection, as per drg duly painted with two coats of black synthetic enamel paint over a coat of pink primer. (DRG No - FD-75M) |
| 104 | Materials and labour for replacement of unserviceablewooden frame of seat of chair CB steel with/without arm and new wooden frame of seat shall be made of best quality Ist class seasoned hard wood, free from knots and infection with 04 Nos machine nuts and bolts 100x4 mm with washer to Chair CB Steel with/without arms of required size and shall be painted with two coats of black synthetic enamel paint over a coat of wood primer all as shown on drg and as directed by Engr-in-charge. (DRG No - FD-75M) |
| 105 | Materials and labour for replacement of unserviceablewooden frame of back of chair CB Steel with/without arm and new wooden frame of back shall be made of best quality Ist class seasoned hard wood, free from knots and infection with 04 Nos machine nuts and bolts 100x4 mm with washer to Chair CB Steel with/without arms of required size and shall be painted with two coats of black synthetic enamel paint over a coat of wood primer all as shown on drg and as directed by Engr-in-charge. (DRG No - FD-75M) |
| 106 | S & F in repairs MS flat stiffener of size 25x3mm with two piece nut & bolts as stiffener shall be fitted for support of seat. |
| 107 | Materials and labour for removing denting from steel frame and wooden surface as wherever required making the surface smooth after removing old paint by Grinding machineremoving existing treatment completely and a coat of red oxide primer , filling putty at required places and spray painting in OG/Grey/white/black shade (as required) with two coats of 1st quality synthetic enamel paint for following Makes :- Asian/Berger/Nerolac and Supply and fixing PVC toes/plug to chair CB steel with/without arms of standardapproved quality. (DRG No - FD-75M) |
| 108 | Chair writing steel MAP (FD/E6/MAP/12/HFD-2025/FD-360/TP) |
| 109 | Materials and labour for removing of old and unserviceable cushion and tapestry of seatfrom chair and supply & fixing of newcushion and tapestry of seat as per sample complete all as specified and directed as per Engineer -in- Charge. |
| 110 | All as per Srl item No. 109 above but back rest of Chair writing steel MAP complete all as specified and as directed. |
| 111 | Cleaning of steel surfaceof Chair writing steel MAP and making good old surface and applying two coat of black synthetic enamel paint complete all as specified and directed |
| 112 | Supply & fixing new arm ofChair writing steel MAP suitable size and design as per original pattern of different make and model all as specified and directed by the Engineer –in- charge. |
| 113 | Supply & fixing in replacement of unserviceable rubber shoes of Chair writing steel MAP with new rubber shoes all as specified and directed by the Engineer –in- charge. |
| 114 | Book shelves steel large (DRG No - FD-1028/ TP) |
| 115 | Preparation of old paintedinner steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 116 | Preparation of old painted outer steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertonepaint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved qualityincluding dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 117 | S & F Lock 7 lever with duplicate keys components of Almirah steel medincluding dismantling unserviceable one all as specified and as directed.(Make of Lock- Harrison/Rina/Link) |
| 118 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size & 5.5 mmtransparent glass, painting with one coat of synthetic enamel paint inside and outside and dismantling unserviceable one all as specified and as directed |
| 119 | Form with back / without back (Drg : FD-78(M),FD-77(M),FD-1027) |
| 120 | Removing of existing old unserviceable seat and supply & fixing new seat sizemade out of 1st class hard wood and fixed with new nut and bolt complete all as shown on drawing . |
| 121 | Removing of existing old unserviceable Back and supply & fixing new back sizemade out of 1st class hard wood and fixed with new nut and bolt complete all as shown on drawing . |
| 122 | Preparation of old steel surface of Form with/without backand welding/tighting loose joints, if any including de-rusting the surface and painting with two coat of syntheticenameled paint as directed by Engineer-in-Charge. |
| 123 | Scratching the entire wooden surface of Form with/without backwith electric grinder, filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 124 | Table Bed Side (FD/E6/MAP/15(R)) |
| 125 | Taking out old & unsv side/back portion of the Table Bed Side and S & F new side/back portion made out of 18mm thick pre-laminated particle board including 1mm thick PVC beading all around with fevicol complete all as specified and directed by Engr-in-Chrge. |
| 126 | All as per Srl item No. 125 above but top portion of Table bed side complete all as specified and as directed. |
| 127 | Taking out old & unsv Bottom portion of the table bed side and S & F new bottom portion made out of 12mm thick BWR plywood complete all as specified and directed by Engr-in-Charge. |
| 128 | All as per Srl item No. 125 above but upper drawer of Table bed side complete all as specified and as directed. |
| 129 | All as per Srl item No. 125 above but lower drawer of Table bed side complete all as specified and as directed. |
| 130 | All as per Srl item No. 125 above but telescopic channel of drawer of Table bed side complete all as specified and as directed. |
| 131 | All as per Srl item No. 125 above but fancy stainless steel handle of Table bed side complete all as specified and as directed. |
| 132 | All as per Srl item No. 125 above but MS square pipe of Table bed side complete all as specified and as directed. |
| 133 | S & F PVC shoe of table including dismantling unserviceable one all as specified and as directed. |
| 134 | Bed Hard (FD/E6/MAP/08® ) |
| 135 | Taking out old U/S ply fromBed Hard (FD/E6/MAP/08(R) and S&F new 12mm thick plywood BWR grade alongwith 10 Nos of nut and bolts of appropriate size in each bed complete all as specified and directed by Engr-In-Charge.Make : Green ply/Century ply/archid ply. |
| 136 | Taking out old & unsv particle board inside head board/foot Board of the Hard Bed and S & F new made out of 18mm thick pre-laminated particle board including 1mm thick PVC beading all around with fevicol with screw at head board/foot Board all as specified and directed by Engr-in-Chrge. |
| 137 | Preparation of old painted steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 138 | Table Computer ( Drg: FD/E6/MAP/03 & TP) |
| 139 | S & F New top of table computermade out of 18mm pre-laminated Particle board exterior grade of approved shade along withPVC beading all round with fittings and fixtures with matching shade including dismantling unserviceable oneallas per existing pattern and drg and as directed by Engr-in-Chrge. |
| 140 | Dismantling carefully and taking out old unserviciable/damaged UPS shelf of computer table and supply & fixed of new UPS shelf made out of 18mm pre-laminated particle board of approved shade along with PVC beading all round with fittings and fixtures required shape & size and fixed the same properly as per existing pattern and drg and as directed by Engr-in-Chrge. |
| 141 | Dismantling carefully and taking out old unserviciable/damaged drawer of computer table and supply & fixed of new drawer made out of 18mm pre-laminated Particle board of approved shade along with telescopic channels with ball for easy movement including lock and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per existing pattern and drg and as directed by Engr-in-Chrge. |
| 142 | S & F New keyboard tray of table computermade out of 18mm pre-laminated particle board of approved shade along with telescopic channels with ball for easy movementincluding dismantling unserviceable oneallas per existing pattern and drg and as directed by Engr-in-Chrge. |
| 143 | Preparation of tighting loose joints with L shaped interconnected servo bracket alongwith PVC/Steel standing shoe including preparation of old painted steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed.Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge. |
| 144 | Chair verandah (FD-256) |
| 145 | Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality andproviding new suitable PVC shoes of approved quality and colour complete all as specified and as directed.= |
| 146 | Re-canning of ChairsVerandah (FD-256) :-M&L for removing of old/broken/unserviceable plastic cane and re-canning ofseat and back of chair Verandah with 4.00 mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godrej pattern. |
| 147 | Table 3\"X3\" Steel ( Drg No. FD-1009) |
| 148 | Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated particleboard /Particle Board , one side laminated finish including provision of 4mm thick teak wood beading all as specified and directed |
| 149 | Preparation of old painted steel surfaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/Berger approvedby Engr-in-Charge. |
| 150 | Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge .All Joints duly welded/Screwed as per Drgs |
| 151 | Note:- Following unserviceable parts of existing wooen furniture shall be removed and replaced/repaired carefully without disturbing the adjoining parts including tightening, screwing,glueing, nailing wherever applicable and work will be executed where the furniture exists at BSO furniture yard of GE 871 EWS and Various locations at Joshimath under jurisdiction ofGE 871 EWS as directed.Note :-area of maint can be incredesed/decrease as per direction recoved by higher authority. |
