|
| 1 | Chair easy cushioned FD-358 (m) |
| 2 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 3 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 4 | Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg. |
| 5 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg. |
| 6 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg. |
| 7 | Providing new cushion on back rest & Seatof appropriate size of 40 D foam complete with dismantling old one with first class raxine/tepstray cloth as per sample held with GE.Make- Sleepwell/Featherfoam |
| 8 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 9 | Chair Dining (Drg FD-228, 262, 270 & 279,FD/MAP-II/04) |
| 10 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 11 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 12 | Removing of old unserviceable front/back/side rails and S&F new front/back/side rails made out of seasoned shisham/teak wood all as per drg. |
| 13 | Removing of old unserviceable centre/side stiffener and S&F new centre/side stiffener made out of seasoned shisham/teak wood all as per drg. |
| 14 | M&L for removing of old/broken/unserviceable plastic/PVC Seat and fixing of new PVC/Plastic seat of white colour of Chair Dining MAP all as specified andas per direction of Engr-in-Charge. |
| 15 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 16 | S & F stainless steel 100 mm long‘L’ type bracket of Chair dinning all as specified andas per direction of Engr-in-Charge. |
| 17 | Chair writing/CBA (Drg No FD-202/ 250/285,FD-280): |
| 18 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 19 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 20 | Removing of old unserviceable front/back/side rails and S&F new front/back/side rails made out of seasoned shisham/teak wood all as per drg. |
| 21 | Removing of old unserviceable centre/side stiffener and S&F new centre/side stiffener made out of seasoned shisham/teak wood all as per drg. |
| 22 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg. |
| 23 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 24 | S & F stainless steel 100 mm long‘L’ type bracket of Chair writingall as specified andas per direction of Engr-in-Charge. |
| 25 | Chair easy FD-229,DB-4174 : |
| 26 | Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg. |
| 27 | Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg. |
| 28 | Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg. |
| 29 | Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg. |
| 30 | Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg. |
| 31 | M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing. |
| 32 | Re-canning of Chairs (FD-228, FD-224, FD-274, FD-250, FD-75, FD-228) :-M&L for removing of old/broken/unserviceable plastic cane and re-canning of chair dining, chair CB without arms/chair writing, chairs CB with arms, chairs writing, chair CB office, chairs easy FD/NF,with 2.00 to 2.5mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godrej pattern. |
| 33 | SOFA SET 4/5 SEATER(FD-281,FD/MAP-II/02,TP) |
| 34 | M&L for removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 545 x 530x110mm thick including provision tapesty cloth of approved shade & quality.Make : Sleepwell/Feather foam/sheela foam. Note:-Cushion should be brought in original packing & Stitching should be done at BSO yard. |
| 35 | M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 545 x 530x110mm thick complete all as directed. |
| 36 | M&L for removing unserviceable broken Front/rear Legs ofsofa set 4 and 5 seater and S&F New Front/rear Legs to match the original complete all as specified and directed. |
| 37 | M&L for removing unserviceable broken battensofsofa set 4 and 5 seaterand S&F new battens to match the original complete all as specified and directed. |
| 38 | M&L for removing unserviceable brokenfront/back rail for three seater ofsofa set 5 seaterand S&F new front/back rail to match the original complete all as specified and directed. |
| 39 | M&L for removing unserviceable brokenfront/back rail for single seater ofsofa set 4 seater and to match the original complete all as specified and directed. |
| 40 | M&L for removing unserviceable broken hand rest of sofa set 4 and 5 seater and S&F New hand rest to match the original complete all as specified and directed. |
| 41 | M&L for preparation of surfaces of sofa set 4 seater by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish to obtain a glossy finish all as specified and directed. |
| 42 | M&L for preparation of surfaces ofsofa set 5 seater by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed. |
| 43 | Table 900mm x 600 mm with/ without Drawer ( Drg FD-283 & 284) |
| 44 | Taking out unserviceable top and S & Fnew topof900 mm x 600mm made out of 19mm thick Exterior Grade prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990).Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed. |
| 45 | Taking out unserviceable Drawer of Table 900mm x 600mm and providing newdrawer made of 1st classteak wood frame with 6mm thick plywood at bottom of drawer and 40mm dia aluminium anodized/ SS fancy typein each type drawer shutter & one coat of french polish high glossy finish with preparation of surface complete. |
| 46 | Taking out unserviceable Long rails of Table 900mm x 600mm and providingnew long rail of Ist class hard wood[Teak ] with high glossy finish french polish after preparation of surface complete all as specified and directed. |
| 47 | Taking out unserviceable short rails of Table 900mm x 600mm and providing new short rail of Ist class hard wood with high glossy finish french polish after preparation of surface complete all as specified and directed. |
| 48 | Dismantling of old unserviceable legs and S & F of newlegs made out of first class hard wood ( Teak) including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete all as per size and design of existing Table 900mm x 600mmallas perdrg and as per direction of Eng-in-charge. |
| 49 | Taking down unserviceable centre Stiffener and supply & fixing new centre Stiffener made out of Ist class hard wood (Teak). |
| 50 | Taking down unserviceable Side Stiffener and supply & fixing new Side Stiffener made out of Ist class hard wood (Teak). |
| 51 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 52 | S & F stainless steel 150mm long‘L’ type bracket of table 900mm x 600mm all as specified andas per direction of Engr-in-Charge. |
| 53 | Side Board (Drg FD-26 (M), 241& 371) : |
| 54 | Taking out existing old unserviceable top/bottom of side board and S&F new top/bottom made of 18/19 mm thick prelimanted particle board including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge. |
| 55 | Taking out existing old unserviceable side/middle of side board and S&F new side/middle made of 18/19 mm thick prelimanted particle board including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as specified and directed by Engineer-in Charge. |
| 56 | Taking out unserviceable plywood from back side of Side Board and providing new6mm thick ply wood commercial BWR grade –I. |
| 57 | Taking out unserviceable shutter of Side Board and supply & fixingnew shutter double leaf made of 18/19 mm thick prelimanted particle board fixed with 50mm hinges 3 Nos in each leaf with 6mm thick TW edging including replacement of 40mm plastic knob superior quality in each shutter. |
| 58 | S&Ffor taking out old unserviceable drawer of side Board and providingnew drawer of made of Ist class hard wood [teak] and bottom of 6mm thick plywood commercial BWR grade-I includingreplacement of40mm dia aluminium anodized/ SS fancy type knob in each drawer and polishing all wood work complete |
| 59 | Dismantling of old unserviceable bottomlegs of Side Board and providing newlegs of 45x 45 mm size made of teak wood.All as per size and design shown on drawing. |
| 60 | Dismantling of old unserviceable bottom long railof Side Board and providing new long railmade of teak wood.All as per size and design shown on drawing. |
| 61 | Dismantling of old unserviceable bottom Short railof Side Board and providing new short railmade of teak wood.All as per size and design shown on drawing. |
| 62 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 63 | Table Centre 2 Tier / Table Centre (FD-235, 274) |
| 64 | Removing of old U/S existing top from centre table 2 Tier and S&F new topof size as per drg. Topshall be 18 mmthick preliminatedParticle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood complete all as specified and directed. |
| 65 | Removing of old U/S existing bottom shelf from centre table 2 Tier and S&F new bottom shelf of size as per drg. bottom shelf shall be 18 mmthick preliminatedParticle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood complete all as specified and directed. |
| 66 | Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item complete all as specified and directed. |
| 67 | Removing of old unserviceable long rails and S&F new long rails made out of seasoned shisham/teak wood all as per drg complete all as specified and directed. |
| 68 | Removing of old unserviceable short rails and S&F new short rails made out of seasoned shisham/teak wood all as per drg. |
| 69 | S & F stainless steel 100 mm long‘L’ type bracket of table centre all as specified andas per direction of Engr-in-Charge. |
| 70 | M&L for preparation of wooden surfaces of the Centre Table with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 71 | Chair dinning High back (Drg No FD-357) |
| 72 | Dismantling of Old unserviceable rear legs of chair Dining High back and S&F of new legs made out of Ist class hard wood (teak) including hard rubber shoes provided at bottom of legs with screw complete all as specified & directed by Engr-in-charge. |
| 73 | All as per item No. 72 above but front legs of chair Dining High back. |
| 74 | All as per item No. 72 above but back Support of chair Dining High back. |
| 75 | Removing of old unserviceable leatherite & cushion from seat of chair Dining High back and replacing the same with newleatherite & cushion of 32 density complete as specified and approved by Accepting Officer. |
| 76 | Removing of old unserviceable leatherite & cushion from back of chair Dining high back and replacing the same with new latherite and cushion complete as specified and approved by accepting officer. |
| 77 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 78 | S & F stainless steel 100 mm long‘L’ type bracket of chair dining all as specified andas per direction of Engr-in-Charge. |
| 79 | Peg Table (Drg FD- 25, 277 & 384) |
| 80 | Taking out old unserviceable top and S&F new topof table peg made out of 18/19mm thick Exterior Grade prelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge. |
| 81 | Taking out unserviceable long railof Peg Table and providingnew long rail of Ist class hard wood [Teak ] complete all specified and directed. |
| 82 | All as per item No. 80 above but short rails of peg table. |
| 83 | All as per item No. 80 above but legs of peg table including hard rubber shoes provided at bottom of legs with screw. |
| 84 | All as per item No. 80 above but centre/side stiffener of peg table. |
| 85 | S & F stainless steel 100 mm long‘L’ type bracket of Peg tableall as specified andas per direction of Engr-in-Charge. |
| 86 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 87 | Table Dining 6/8 Persons (Drg FD-30, 239, 273 & 376) |
| 88 | Taking out unserviceable top andS&F new topof1500 mm x 900mm for dining table 6 Person made out of 18/19mm thick Exterior Gradeprelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge. |
| 89 | All as per item No.88 above but Top size 1800 x 900 mm of Table Dining 8 persons. |
| 90 | Taking out unserviceable long rail and S&F new long rail of Ist class hard wood [Teak ] complete all as specified and directed for Table Dining 6 person. |
| 91 | All as per item No.88 above but long rail of Table Dining 8 persons. |
| 92 | All as per item No. 88 above but short rail of Table Dining 6/8 persons. |
| 93 | All as per item No. 88 above but support (stiffener) of Table Dining 6/8 persons. |
| 94 | All as per item No. 88 above but legs of Table Dining 6/8 persons including hard rubber shoes provided at bottom of legs with screw. |
| 95 | S & F stainless steel 200 mm long‘L’ type bracket of Table dinningall as specified andas per direction of Engr-in-Charge. |
| 96 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 97 | Table Dressing Gents with mirror (Drg FD-230, FD/E6/MAP/16) : |
| 98 | Taking out unserviceable top / bottomof table dressing Gents with mirror and S&F top and bottom made out of 18/19mm thick Exterior Grade prelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer -in-charge. |
| 99 | All as per item No. 97 above but side/middle of table dressing gents with mirror. |
| 100 | All as per item No. 97 above but Back alongwith 04 Nos of fastener nut and bolts of appropriate size to be installed at the wall in Md accn of table dressing gents with mirror. |
| 101 | Taking out unserviceable mirror & mirror frame of Table dressing Gents and S&F new mirror of 5.5 mm thick with teak woodframe & wall hanging hook and back made of 6mm thick ply wood commercial BWR Gde-I.( Make : SAINT GOBIN / Modiguard /Atul as specified and approved by Accepting officer) |
| 102 | Taking out unserviceable mirror & mirror frame of Table dressing Gents MAP and S&F new mirror of 5.5 mm thick with teak woodframe & magnetic catcher and back made of 12mm thick ply wood commercial BWR Gde-I.( Make : SAINT GOBIN / Modiguard /Atul as specified and approved by Accepting officer) |
| 103 | Taking out unserviceable glass shelf of Table dressing Gents MAP and S&F newglass shelf of 6 mm thick with vacuum rubber & hanging/supporting hook. |
| 104 | supply & fixing new drawerof table Dressing gents made out Ist class hard wood [teak]with bottom of 6mm thick commercial plywood with replacement of 40mm dia aluminium anodized/ SSfancy type in drawer complete . |
| 105 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 106 | S & F stainless steel 12 inch long‘L’ type fancy bracket with Fastener nut and bolts to be installed at the wall in Md Accn of Table Dressing gents withall as specified andas per direction of Engr-in-Charge. |
| 107 | Hat Stand with Mirror (FD-361 & 362) |
| 108 | Taking out unserviceablemirror and supply & fixing of new Mirror of thickness 5.0 mm alongwith semi round beat around the mirror complete all as specified and directed. Make- Modiguard and equivalent. |
| 109 | Taking out unserviceablewooden structure along with veneer on the top of hat stand with mirror and S&F new wooden structure along with at front 4 mmthick veneerto main boardincluding 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer -in-charge. |
| 110 | Taking out unserviceable plywood at the back side and S&F 6mm thick ply wood commercial BWR grade-I including two hanging clips with Fevicol and nails complete all as specified and directed by Engineer -in-charge. |
| 111 | Taking out unserviceable Hook on the top and supply & fixing new hook of stainless steel fancy type all as specified and directed by Engineer -in-charge.. |
| 112 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 113 | Teapoy (Drg FD-341 (M), 278, 382): |
| 114 | Taking out unserviceable top and S&F new top of teapoy made out of 18/19mm thick Exterior Grade prelaminated particle boardincluding 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge. |
| 115 | Taking out unserviceable long rail and providing new long rail made out of Ist class hard wood [teak ] complete. |
| 116 | All as per item No.114 above but short rail of Teapoy. |
| 117 | All as per item No.114 above but legs of Teapoy including hard rubber shoes provided at bottom of legs with screw. |
| 118 | S & F stainless steel 100 mm long‘L’ type bracket of Teapoyall as specified andas per direction of Engr-in-Charge. |
| 119 | All as per item No.114 above but center/side stiffener of Teapoy. |
| 120 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 121 | Table (900mm x 900)mm, Table Card (Drg FD-88(M), 299, FD-91,288,276) |
| 122 | Taking out unserviceable top and S&F new topof900 mm x 900 mm made out of 18/19 mm thick Exterior Gradeprelaminated particle board including 6mm thick teak wood edging all around with Fevicol and nails complete all as specified and directed by Engineer-in Charge. |
| 123 | Taking out unserviceable rail/stiffenerof Table 900mm x 900mm and providingnew rail of Ist class hard wood complete all specified and directed. |
| 124 | All as per item No. 122 above but legs of Table 900mm x 900mm. |
| 125 | All as per item No. 122 above but \"L\" type bracket of Table 900mm x 900mm. |
| 126 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 127 | Bed Hard(Drg FD-246/247) : |
| 128 | Taking out unserviceable top of bed plywood and Supply & Fixing new oneof commercial plywood 12mm thick size 6’-3” x 3’ (BWR type) fixed with MS screw including tightening of loose frame/assembling of loose component complete all as specified & directed by Engr-in-charge. |
| 129 | Taking out unserviceable headboard of Bed Hard and providing new ones & fixing offive hard wood batten (Horizontal and vertical) covered both side with 4mm thick veneer ply wood one side teak face fixed with MS screw, fevicol and nails including teak wood beading 6mm thick to all sides of board complete all as specified & directed by Engr-in-charge. |
| 130 | All as per item No.128 above but foot board of Bed Hard. |
| 131 | Taking out unserviceable long rails of Bed Hard and providingnew Ist classhard wood (teak)long rails of the existing pattern and size to the bed complete. |
| 132 | All as per item No.128 above but short rails of Bed Hard. |
| 133 | All as per item No.128 above but legs of Bed Hard. |
| 134 | All as per item No.128 above but stiffeners of Bed Hard. |
| 135 | S&F for flat Iron 25 x 4mm L-Shaped stiffeners 200mm long on either side fixed with screw at a junction of long rail, short rail, foot and head Board of Bed hard complete. |
| 136 | S&Ffor repair of MNF fixing arrangement on Head board and foot board of bed plytop with brass screw 25 mm long round head two numbers each side. |
| 137 | S&Ffor repair of MNF set of 19 mm rectangular tube made in T fashion(with end plugged with 1.2 mm MS sheet) welded on Head board and foot board of bed plytop alongwith duly painted withtwo coats of synthetic enamel paint over a coat of red oxide primer |
| 138 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes, making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 139 | Table Dressing Ladies ( Drg FD_251, FD/E6/MAP/16) : |
| 140 | Taking out unserviceable top / bottom of table dressing with mirror ladies and supply & fixing top & bottom of table dressing with mirror ladies made out of 18/19 mm thick prelaminated particle board exterior grade including 6mm thick teak wood edging all around with Fevicol and nails complete as per size and design of existing Table Dressing and as per direction of Eng-in-charge. |
| 141 | Taking out unserviceable Side / middle of table dressing with mirror ladies and supply & fixing Side and middle of table dressing with mirror ladies made out of 18/19 mm prelaminated particle board exterior grade including 6mm thick teak wood edging all around with Fevicol and nails complete as per size and design of existing Table Dressing and as per direction of Eng-in-charge. |
| 142 | Taking out unserviceable mirror of Table dressing Ladies and supply & fixing of mirror 5.5 mm thickalongwith teak woodframe and back made of 6mm thick ply wood commercial BWR Gde-I .( Make : SAINT GOBIN / Modiguard/Atulas specified and approved by Accepting officer) |
| 143 | Renewal of glass shutter of Table Dressing Ladies with mirror5.5mm thick double leaf complete with aluminium channel all as shown in drawing. Make : SAINT GOBIN or modiguard orequivalent as specified and approved by Accepting officer). |
| 144 | Dismantling carefully and taking out old unserviceable/damageddrawer of Table Dressing Ladies and supply & fixed of new drawer made out of 18mm pre-laminated Particle board of approved shade along with telescopic channels with ball for easy movement including lock and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per existing pattern and drg and as directed. |
| 145 | Dismantling of unserviceablelegs atbottom of Table Dressing Ladies and supply & fixing of new legs with frame made out of Ist class hard wood [Teak ] as per size and design of existing Table Dressing and as per direction of Eng-in-charge. |
| 146 | Dismantling of old unserviceable bottom long railof Table dressing ladies and providing newlong railmade of teak wood.All as per size and design shown on drawing. |
| 147 | Dismantling of old unserviceable bottom Short railof Table dressing ladies and providing newshort railmade of teak wood.All as per size and design shown on drawing. |
| 148 | Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge. |
| 149 | Note:- Following unserviceable parts of existing wooden furniture shall be removed and replaced/repaired carefully without disturbing the adjoining parts including tightening, screwing,glueing, nailing wherever applicable and work will be executed where the furniture exists at BSO furniture yard of GE 871 EWS and Various locations at Joshimath under jurisdiction ofGE 871 EWS as directed. |
