}

Tender For Vedasandur Block Dindigul District Of 1 Works - Tn-05-14-Mlacds-02, vedasandur-Tamil Nadu

Rural Development And Panchayats Department has published Tender For Vedasandur Block Dindigul District Of 1 Works - Tn-05-14-Mlacds-02. Submission Date for this Tender is 05-08-2025. Culvert Tenders in vedasandur Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

50402978
Tender For Vedasandur Block Dindigul District Of 1 Works - Tn-05-14-Mlacds-02
Tender
Indian
Tamil Nadu
Vedasandur
05-08-2025

Tender Documents

Tender Details

Tender For Vedasandur Block Dindigul District Of 1 Works - Tn-05-14-Mlacds-02; 1 Part 01 : Construction of Waitingshed, Culvert and Providing Paverblock Pavement at Keelmathinipatty burialground in Sriramapuram panchayatEstimate Amount Rs.15.00 Lakhs 2 Waiting shed 3 Earthwork excavation and depositing on bank with an initial lead and lift in all classes of soils and sub soils except in hard rock including all labour charges etc . Complete. 4 Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. 5 Refilling the excavated earth including cost and conveyance of all matials to site and all labour charges etc., complete. 6 Brick work in c.m 1:5 mix using country bricks including cost & conveyance of all materials to site and all labour charges etc., complete. 7 Supply & erection of centering for sides & soffits of all R.C.C. worksincluding cost & conveyance of all materials to site and all labour charges etc., complete. 8 Below GL 9 Above GL 10 Supplying and fabrication of steel rods including cost & conveyance of steel as per std. Specification etc., complete. 11 RCC 1:1.5:3mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc complete 12 Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.The Surface shall then be allowed to dry for atleast 48 hours.It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface.Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete].The Putty shoule be got approved by the Executive Engineer before use on work. 13 Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials & all labour charges etc., complete. 14 Cement Concrete 1:2:4 mix using 20mm ISS HBG Metal including cost & conveyance of all materials to site and all labour charges etc., complete. 15 Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labor charges etc complete. 16 Construction of Culvert 17 Earthwork excavation and depositing on bank with an initial lead and lift in all classes of soils and sub soils except in hard rock including all labour charges etc . Complete. 18 Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. 19 Cement concrete 1:3:6 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. Below sill 20 Cement concrete 1:3:6 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. Above sill 21 Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. Above sill 22 RCC 1:1.5:3 mix using 20mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. Above sill 23 Supply & erection of centering for sides & soffits of all R.C.C. worksincluding cost & conveyance of all materials to site and all labour charges etc., complete. 24 Below Sill 25 Above Sill 26 Supplying and fabrication of steel rods including cost & conveyance of steel as per std. Specification etc., complete. 27 Supplying and Filling of Gravel including cost & conveyance of steel as per std. Specification etc., complete. 28 Providing Paver Block Pavement 29 Earthwork excavation for foundation in all clauses of soils and subsoils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, struting and bailing out water wherever neccessary and refilling the sides of foundation 30 Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. 31 Supplying and erecting centering for sides & soffits including supports and strutting up to 3.29m height for plane surfaces in all floors with all cross bracing using mild steel sheets of size 90cm x 60cm and 10 gauge stiffened welded with mild steel angl 32 Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. 33 Construction of Granular Sub base by providing with graded materials of size 9.5mm to 4.75mm metal in 66% & 2.36mm in 34% including spreading in uniform layers with motor grader on propared surface, mixing by mix in place method with rotavator at OMC and 34 Providing and Laying of Interlocking Concrete Block (Surface Textured) Pavements having thickness 60mm and compacted over a thin bedding sand layer of 30 mm thickness and joints shall be filled by fine sand of specified grading as per table 1500.6 of Spec 35 Provision forName Board 36 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}

Key Value

Document Fees
Refer document
EMD
INR 15000.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail