Tender For Three Face Bore Moter Pipeline Tanki My Assesaries Karya Malyakhedi Gram Panchayat Phalwa, nimbahera-Rajasthan

Tender For Three Face Bore Moter Pipeline Tanki My Assesaries Karya Malyakhedi Gram Panchayat Phalwa; 1. Construction of tube wells upto 100 m depth and above in all types of rocks by DTH system and over burden, in all types of soil and over burden to accommodate casing pipe of following sizes including lowering of casing pipe but excluding cost of casing. Nominal bore of 150 mm diameter. (PWD BSR 2022-20234.2.3) 2. Supply of ISI marked (IS: 4270/1992) ERW M.S. Block casing pipe of grade Fe 410 of following sizes at work site. (Nominal bore of pipe 150 mm, Outside diameter of pipe 168.3 mm, Thickness 3 mm). (PWD BSR 2022-2023 4.5.3) 3. Fitting accessories - Bore cap, clamp, nipple etc. (PWD BSR 2022-2023 4.8.3) 4 Provision and lowering of B category 32mm diameter GI pipe (PWD-E BSR 2022-2023-21.12.1). Pipes including all assessments and fitting including cost of MS socket at work site. 5 Supply and installation of ISI marked (IS:8034-1989) submersible pumping motor pump set of approved brand KSB. Kirloskar, Calama, Texmo, CRI, Crompton Greaves, plug making connection, suitable for TW/DCB/Open well. GI pipe is required in this work. All labour involved in screwing and welding of flanges on riser pipes, fixing complete fittings and accessories along with riser pipes, laying of electrical wires and other connections, making electrical connections of switch board, testing of submersible pump set and water supply to water main lines, complete in all respects. 12.5 HP, 3-Ø, (78 - 126) m, (395-245) LPM (PWD-E BSR 2022-2023-21.6.2.4) 6A) Starter (PWD-E BSR 2022-2023-21.13.1.1) 7 P/Laying ISI marked P.V.C. insulated submersible cable conforming to IS:694 with flexible copper conductors, including connections etc. (PWD-E BSR 2022-2023-4.7.3) 4.0 sq.mm, 3 core flat/round as required. Group-3, 8 Wiring for Sub Mains ISI marked (IS:694) 1100 volt grade PVC insulated flat twin core sheathed solid aluminium conductor 10 SWG GI with support wire, duly clipped as required etc. Group-36.0 sq.mm (PWD-E BSR 2022-2023-4.6.2) 9 S/F PVC Water Tank (BSR 2022-23 Item No. 31) 2 Nos @1000 Litres 10 S&F MS Steel Stand, made of angle, flat, sheet etc., complete. (BSR 2023-24 Item No. 63) 11 Add. Lump sum amount for PVC tank fitting accessories (Engineer in charge) 12 Earthwork by JCB machine/ tractor, breaking of dug out earth lumps (breaking of clods), removing grass and gravel, stones (stripping of grass and gravel) and sectioning of band (bund)/maintaining profile. Digging and digging upto initial lead 250 m and lift upto 3 m. Draft based on Chapter 5 of Irrigation Page No. 32 to 34 (as on 01/02/2017) One 1 cu.m. plumbing work in hard soil (in hard soil) 13 Providing and laying of HDPE pipes conforming to IS:4984:2021 for water supply suitable for submersible and jet pumps complete with necessary fittings like sockets, elbows, tees etc. All works are subject to prior approval by Engineer in charge. For additional technical parameters of products/work, refer Annexure A attached with this BSR for Horizontal installation 90 mm OD 6 kg/cm2 (PWD-E BSR 2022-2023-21.4.2.5). 14 P&FG.I.Pipes (External works) with G.I. Fittings, except Union (IS: 1239 Mark) including trenching and earth filling etc. Nominal bore of 50 mm diameter (PWD-E BSR 2022-2023-2.2.6) 15 P/F Valves for pipe lines and additional fittings required

INR 1000 /-

INR 25400.0 /-

INR 12.70 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB