Bids Are Invited For 1 61610506 Austenitic Type (303 Se) Free Machining Non-Magnetic Bright Quality Stainless Steelhexagonal Bar C 2 62602204 Brass Round Hal Std 1301,Is 319,Type-1 1/2Hard,Dia 4Mm X 2 To 3 Meters Length 3 62604754 Half Finished Brass

Sharing tender

Bids Are Invited For 1 61610506 AUSTENITIC TYPE (303 SE) FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEELHEXAGONAL BAR C 2 62602204 BRASS ROUND HAL STD 1301,IS 319,TYPE-1 1/2HARD,DIA 4MM X 2 TO 3 METERS LENGTH 3 62604754 Half finished brass material tubeDIA 4 X 0.5 OF1000MM HAL STD 1307/IS407-81 GRADE CUZn37 4 62606204 Naval Brass Rods, ConditionAnnealed,conforming to IS 291 1989, Grade 1, / HAL STD 1302 / BS282 5 62612102 COLD ROLLED BRASS SHEET,STRIP& FOIL THCOND HALF HARDCuZn37,IS 410/C27200,ASTM B36/CZ108,BS2870/CU 6 62612104 COLD ROLLED BRASS SHEET,STRIP& FOIL THCOND HALF HARDCuZn37,IS 410/C27200,ASTM B36/CZ108,BS2870/CU 7 62617204 RIVETTING QUALITY BRASS WIRE CONF.HAL STD 1303,IS 4413-CUZN-37 ANNEALED CONDITION DIA 4MM 8 63615303 BARE COPPER WIRE, CONDITION ANNEALED, CONFORMING TO HAL STD6054 Grade B / IS 8130 / BS 128 / AST 9 64617110 ALLUMINIUM ALLOY SHEET,HAL STD 1252-1/2H, CONFIRMING TO ISGR 31000(NS3) IS 737 EN573-3-3003 OR 3 10 64621013 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BO 11 64621014 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BO 12 64621025 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BO 13 64621120 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SID 14 64621160 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BO 15 64655128 ONE SIDE/TWO SIDES POLISHED(Ra 0.2 microm) NON-FADING BLACK ELECTRO COLOURED ANODIZED ( as per MIL-A-862 16 65116206 PTFE/TEFLON ROUND CONFORMING TO HAL STD 6251 MIL-P-19468A OR ASTM-D-1710, GRADE-II,TYPE -3, CLASS-D 17 65125039 NYLON ROUND TYPE -66. DIA 12 MM.HAL STD 1851 18 65125148 GLASS EPOXY LAMINATED SHEET, CONFORMING TO HAL STD1807, NEMALI -1- 98, GRFR4 / BSEN 60893 - 3- 2 19 65125285 COPPER CLADED GLASS EPOXYLAMINATES CONF. TO IPC-4101 B/26 WITH TG greater than or equal to 170 DEGREE CWITH 1 OZ COPPE 20 65125396 NYLON SHEET CONFORMING TO HAL STD1853, MIL-P-20693 A, TYPE-I, SIZE thickness 6 X 1000 X 1000 MM 21 65131105 GLASS EPOXY LAMINATE SHEET CONFORMING TO HAL STD1807 BS 3953-1990 GRADEEP3 (OR) EP4 (OR) BSEN Total Quantity : 2323