|
| 1 | SCHEDULE \"A\" PART-I: B/R WORKS |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided fo complete all as Specified. |
| 3 | S & F1.25mm thickSteel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete: gear operated type with chain wheel and hand chain |
| 4 | S&FSafety lever locks mild steel with 4 levers for rolling shutter |
| 5 | S&FBall bearing for rolling shutter |
| 6 | S&FCollapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete |
| 7 | Taking down cement plaster onbrick work, racking out joints, hacking for key scrubbing down with water etc complete and removing outside MD land . |
| 8 | M&L for providing 10 mm thick one component chloride free thixotropic fibre reinforced polymer modified repair mortar with alkali resistant synthetic fibres for exceptional resistance cracking complies ASTMC 109 with flexural strength ASTM C 348 @ 7 days meeting 7N/mm2, tensile strength @ 7days (ASTM C 307)> 3 N/mm2, compressive strength of 35Mpa at 7 day and 45Mpa at 28 days, Adhesion bond strength> 2 N/mm2 ,Creep Strain Reduction- 10% at the outer or inner RCC ceiling surface.cement and sand can be used for finishing purpose. It should be specially adhered to BS 6319 having specific gravity of 1.025 to 1.04, minimum 43% solid contents complete all as specified and as directed.Make : Thermax Ltd, Tiki tar Danosa(Pvt)Ltd,M/s Torchtar menbranes & bitumen products Pvt. Ltd or Equivalent in Sika/STP/Pidilite. |
| 9 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and Finished even and smooth without using extra cement. |
| 10 | M& L for preparing newly plastered surfaces of walls and applying two coats of white wash. |
| 11 | M& L for preparing newly plastered surfaces of Ceilings and applying two coats of white washupto 9th floor. |
| 12 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of anti corrosive paint over a coat of primer. |
| 13 | Surface excavation n. exc 30cm deep & averaging 15cm deep & getting out in soft and loose soil . |
| 14 | M&L for hardcore of broken stone of guage n. exc 63 mm deposited,spread and levelled in layers n. Exc 15 cm thick , water and ramed to a true surface |
| 15 | M&L for 100 mm cement concrete Type B-2,1:2:4 (40mm graded aggregate) in flooring/hard standing & finished the surfaces even and smooth with using extra cement all as specified and directed. |
| 16 | M&L sand cushioning in floors or paving, laid in layers n.exc 15 cm thick, spread levelled and rammed including watering all as specified and directed. |
| 17 | M&L machine pressed precast concrete interlocking paver block of any shape and size confirming to ISI 15658-2006 of 80 mm thickness M-40 grade with grey cement & with pigment all as specified and directed. |
| 18 | M&L for PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate as in coping all as specified and directed. |
| 19 | M&L for brick work with flyash bricks straight or curved on plan exc 6m mean radious built in cement mortar 1:6 |
| 20 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing the surface fair and even using without extra cement as on external surface all as directed. |
| 21 | M&L for preparing newly plastered surface with two coats of cement paint over a coat of primersurface. |
| 22 | S&F 110 mm dia PVC (SWR) pipes single cocketed, in any length, in rubber ring joints, laid in trenches or in floors. |
| 23 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 24 | SCHEDULE \"A\" PART-II: E/M WORKS |
| 25 | S & F water heater storage type , electric capacity 25 litres, copper storage tank, BEE 5 star rated including Hot and cold heavy duty pipes, complete installation, testing and commissioning complete all as specified and as directed. |
