Installation Of Submersibles Pump With Tank And Soakpit Near Karim Mia House At Sansad No Xiii Under Madnabati Gp Mouza Nababnagar Jl No 136 Plot No 1032 (Activity Id- 110645420)
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
08 Aug 2025
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bamangola → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersibles Pump With Tank And Soakpit Near Karim Mia House At Sansad No Xiii Under Madnabati Gp Mouza Nababnagar Jl No 136 Plot No 1032 (Activity Id- 110645420)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Aug-2025 | NIT | Other | 08-Aug-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Submersible |
| 2 | Earthwork in excavation in foundation trenches or drain in all sorts of soil (including mixed soil but excluding laterite or sand stone) icluding removing, spreading & stacking the spoil within a lead of 75m as directed. The item includes necessary trimming the sides of trenches. Levelling, dressing and ramming the bottom, bailing out of water as required complete. |
| 3 | Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete.a) with earth obtainedfrom excavation of foundation. |
| 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 5 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 6 | Cement concrete with graded stone ballast (40 mm size excludingshuttering)In ground floor(A) [Pakur Variety](a) 1:3:6 proportion |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground flooras per relevant IS codes.iii) RajMahal |
| 8 | Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. |
| 9 | Supplying bending and binding and laying in position steel reinforcement of different diamensions in cement concrete work of different components in foundation and in superstructure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and confirming to IS 280 at every intersection hooked and bent to correct shape and placed in forms etc, including cost of black annealed wire and cost of loding, unloding, carriage of all steel materials and as directed. |
| 10 | Artificial stone in floor , dado stair case etc with cement concrate (4:2:1) with stone chip , laid in pannels as a directed with toping made with ordinary or white cement ( as directed) and marbel dust in propotion (2: 1) including smoth finishing and rounding off corners and includingapplication of cemnet slurry before flooring works. using cement@ 1.75 kg/sqm all complete including all materials and labours.(a) Inground Floor,(i) 25 mm. thick |
| 11 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (c) 15 mm thick plaster |
| 13 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 14 | Labour for boring tube well of required dia. by water jet system throughany type of soil strata including hire and labour charges for boring pipes,scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.d) For depth upto 150 metre for 50 mm dia. tube well with topenlargement of 100 mm dia. 50 mm dia |
| 15 | Labour for boring tube well of required dia. by water jet system through 100 mm dia. |
| 16 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pia size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete. |
| 17 | Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part-I) with all necessary accessories………(a) Carriage up to work site (each socket fitted) |
| 18 | Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part-I) with all necessary accessories……… |
| 19 | Supplying fitting and fixing of P.V.C reducing socket with ISI mark. A) 100mmx50mm |
| 20 | Supplying fitting and fixing high density polythine strainer of approved make with adapter confirming to I.S specification. |
| 21 | Supplying, fitting and fixing steel cutter piece up to 450 mm long with sockets. |
| 22 | Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part-I) with all necessary accessories… for delivery from housing (well pipe)....(a) 40 mm dia. |
| 23 | Supplying, fitting & fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted andtested to 21 kg per sq.cm. |
| 24 | Supplying fitting fixing submersible1.5 H.P. pump directly coupled with water proof ….. in 150mm - 100mm tube well including 2.5 Sq.mm 3 core PVC flat coper cable (Finolex) as required including 32 Amps TPN retainable type switch unit (Havells) with indoor type shunt capacitor 1 KVA etc all complete as required. (Kirloshkar / KSB / Crompton / Coloma motor D.O.L typed model = 1No |
| 25 | Supply, fitting & fixingof 3 core 2.5 mm 2 Flat Copper Submersible Cable ( mark FINOLEX/HAVELL\"s) |
| 26 | (a) Supply and delivery of M.S. Rest clamp complete. Crompton / Coloma motor D.O.L typed model = 1No |
| 27 | Nut & Bolts of 10 mm thick for 40 mm dia. Pipe |
| 28 | Supply & delivery of 32 Amp. SPN Main Switch (HAVELL\"s) |
| 29 | M.S. vertical iron treatment plant of dia 400 mm X 1700 mm height with filtermedia and charged media fine gravels with all pipe fitting & fixingcomplete in all respect and 5.00 no of valve used ….. With ISI marks and as per direction of E.I.C. |
| 30 | Oxidization chamber dia 400 mm X height 600 mm with MnO2 media used and fitting and fixing all complete with ISI marks as per directionof E.I.C. |
| 31 | Quatation fee for W.B.S.E.D.C.L Connection |
| 32 | Providing and Display Board at Site an taking three stages of works\"s Photographs etc. complete ….. |
| 33 | GST |
| 34 | Cess |
| 35 | Contingency |
AI Tender Summary
Tender Timeline
Aug 02, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 08, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 08, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender