Renovation Of Tubewell With Electrical And Hardware Item At Je Store Kabool Nagar And Garhi Mandu Je Store., garhi-Delhi

Renovation Of Tubewell With Electrical And Hardware Item At Je Store Kabool Nagar And Garhi Mandu Je Store.-Dismantlinglifting the submersible pump set with all allied E&M equipment and Dismantling Delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer, electric connection etc as required 2 Supply of sub. Pump set with wet type submersible motor complete with multistage pump set working on 415 V 3ph 50Hz AC supply of 10 HP and delivery size 80mm, having the Discharge. 600 LPM, head 48mtr.MakeKSB/BS/SU/ all DJB approved make. 3 Supply of distribution panel board for automation of operation of T/well up to 10 HP Submersible pump set having sheet enclosure made out of 16 SWG sheet and 50 x 50 x6 mm angle iron and size 1000x750x300mm with 02 feet long legs stand, totally enclosed, power coated free standing floor mounted type, dust & vermin proof, out ward opening lockable door having hidden hinges and bolted back cover both using non-deteriorating neoprene rubber gasket. The various components and sub equipment of the panel will be shaped out of high conductivity electrolyte alluminium conductor and shall be liberal size. The control wiring of the panel will be done with PVC flexible wire of 1.5 mm2each wire will be terminating a ferule crimped to the wire having the following components.:- MCCB, TPN of 100A breaking cap, 25 KA suitable for motor protection -1 No. Make L &T/ Havells-. Power contactor 32 A. triple pole - 2 Nos. MakeL &T/ Havells. Ampare meter (0-30A) 4 size square. Type -1No. MakeL&T/AE. Voltmeter (0-500v) 4 size square. Type -1No. Make AE/L&T -1 NO. Indicating lamp set for RYB phase--01 Set. Make L &T/ Havells. Single Phase preventor -01 No. MakeL&T/ siemens. Time switch digital/Analog type- 01 No. MakeL&T / Havells. Over load relay thermal type 14-23 A -1No. Make L &T/ Havells. Star delta timer on delay -01 No.MakeL&T /Havells. Automanual switch 2 position selector switch centre off with no + NC block-1No.MakeL&T/ Havells. Three pole power contractor -25A cap. -01 No. MakeL&T/ Havells. TP MCB of 63 Amp. Capacity - 01 No.MakeL&T /Havells. Supply of changeover switch 63 Amp, capacity four pole - 1 No. Power capacitor of 05 kVar. 415 volt 50Hz AC supply-01 No. MakeL&T /Havells. Thepanel should start & stop automatically as per timing set in this. It should also re -start automatically on resumptions of power in case of power failure 4 Supply MCCB, TPN of 100A breaking cap, 25 KA suitable for motor protection. Make:- L &T/ Havells 5 Supply Power contactor 32 A. triple pole ,-Make :- L &T/ Havells 6 Supply of Timer switch digital/manual type .MakeL&T / Havells 7 Supply Over load relay thermal type 14-23 Amp. Make L &T/ Havells 8 Supply Three pole power contractor -25A cap. MakeL&T/ Havells 9 Supply of on load changeover switch 100 Amp. Capacity, four pole, MakeL&T /Havells/ Djb Approved Make 10 Supply Of P.V.C insulated sheathed copper conductor cable for submersible pump motor of size 6 mm2 x 3core. Make:- Gloster/National/Djb Approved 11 Supply Of 80 mm dia D/F GI pipe in B class as per ISI 3 mtr (10 feet) long each, complete with cutting flange for submersible cable and support welded. MakeJindal/TaTa/Djb Approved Make 12 Supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia. 13 Supply Of 80mm GI bend with both side flange welded. 14 S/o M.S. bore cover made out of M.S. plate suitable for 10 dia bore or as per site requirement complete with suitable hole for passing the 80mm dia GI pipe. 15 S/o rubber mat for electrical purpose of size 1Mx2M and 12.5mm thick. Make:- jyoti/national/Djb Approved Make 16 S/o electronic dozing pump (4LPH 5.5 kg) electrically controlled operated 230v. 50 HZ, supply chemical grade tank of 100 ltrs with pipe. Make:- Milton roy/clomax/Djb Approved Make 17 S/o nut bolts with washer of good quality of ½ x 2 size 18 S/o rubber packing sheet synthetic of 50% neoprene. Make:- jyoti/national/Djb Approved Make 19 Workmanship Charges for lowering the submersible pump set in existing bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision while executing the work or wherever necessary. The components of the installation shall be of such design so as to satisfactory function under all conditions.

INR 500 /-

INR 8100.0 /-

Refer document