Tender For Construction Of Anicut At Sangwara Nallah Village Panchdeval Tehsil Pindwara District Sirohi - Civil work 2 Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. 3 Excavation including loading unloading disposal and dressing of excavated rock within initial lead of 50m and lift upto 1.5m in dry or moist including dressingof excavatedarea,de-wateringwhereverrequiredcompleteinall respect. Hard / dense soil 4 Soft / Disintegrated rock 5 Hard rock not requiring blasting 6 Phylite & other hard rock requiring nominal blasting 7 Hard rock (dry or moist) requiring blasting (where hardness of rock is more than 2) including disposal of excavated material in the designated spoil bank / embankment, dressing of excavated material and dewatering with all leads & lifts of excavation and disposal. The contractor is free to use the usable excavated stone else where for which any transition expenditure & royalties, tax etc if required to be paid then it will be liability of contractor as the cost of usable stone has already been deducted from the rate. 8 Drilling holes of 35 mm diameter for anchor rods. 9 Labour charges for Fixing of anchor bars in neat cement grout including cost of cement and curing etc. complete 10 Supply of Tor steel anchor bars of required diameter, length and shape at site of work complete. 11 Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3(1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto 40mm 12 Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing,compaction and finishing with rendering in cement sand mortar 1:3 (1cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto 20mm 13 Providing and Laying in position of Cement concrete Design mix M-20 including leads of all construction materials, plasticizers (if required), curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good thejoints excluding the cost of centering, shuttering and reinforcement.Well graded crusher broken stone aggregate of maximum size upto; (For mix design Cement content considered 400 kg/ cum of concrete),Max size of Aggregate 20 mmAdd Extra for RCC work for Retaining wall, wing wall, returns, divide wall, Pier, 14 Providing and Laying in position of Cement concrete Design mix M-25 including leads of all construction materials, plasticizers (ifrequired), curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good thejoints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto; (For mix design Cement content considered 420 kg/ cum of concrete) 15 Supplying of M.S.Reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using(ii) Tor or ribbed bars (IS :1786-1985 16 Side shuttering including propping etc. complete (to achieve finish F 2 for : Retaining wall, counterfort, abutment, wing walls up stream or down- stream slope facings of dams and open faces of construction joints etc. 17 Supplying stone, spall and laying R. R. stone pitching, hammer dressed with packing of voids from small stones including all lead & lifts, in required profile of 23 cm thickness (± 5 % thickness tolerance) 18 Providing, Fabrication, machining with straightening work of Guide Tee, Track, Sealing frame, Leaf frame or any part of gates, complete as per drawing with testing, including cost of all materials, with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc.,complete as per specifications and approved drawings with all leadand lifts, including packing & forwarding, transportation charges for structural steel components and other materials. Rate of work with all materials .Gate for silt exculator 1 n.
