Tender For Water Supply Arrangement At Karanjgaon Taluka Lohara And District Dharashiv 15Th Finanace Commission G P Level Under Aamcha Gaon Aamcha Vikas Programme Z P Dharashiv- 1 Sub Work :- For Pipe Line WorkItem No.1: Excavation for foundation/ pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling etc.complete. a) Lift 0.00 to 1.50 M.(Bd.A.1/259 ) (MJP DSR 23-24 Sr.No.1 P.No.37) 2 Item No.2: Excavation for foundation/ pipe trenches in hard murum including removing the excavated material upto a distance of 50M. and lifts as below, stacking and spreading as directed by Engineer in charge, normal dewatering, preparing the bed for foundation and excluding backfilling etc. complete. a) Lift 0.00 to 1.50 M.(Bd.A.2/259) (MJP DSR 23-24 Sr.No.2 P.No.37 ) 3 Item No.3: Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M. beyond the area and lifts as below, stacking and spreading as directed by Engineer in charge normal dewatering, preparing the bed for foundation and excluding back filling etc. complete.a) Lift 0.00 to 1.50 M.(Bd.A.3/259(MJP DSR 23-24 Sr.No.3 P.No.37) 4 Item No.4: Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M. beyond the area and lifts as below, stacking as directed by Engineer in charge, normal dewatering, preparing the bed for foundation and excluding backfilling etc. complete. a) Lift 0.00 to 1.50 M.(Bd.A.4/259 )(MJP DSR 23-24 Sr.No.5 P.No.37 ) 5 Item No.5: Filling in plinth and floors murum bedding in trenches with approved murum from excvated materials from foundation in 15cm. to 20cm. layers incuding watering and compaction, etc.complete. (Bd.A. 10/263)(MJP DSR 23-24 Sr.No.16 P.No.41) 6 Item No.6:Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification No. 4985/ 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (Selfit type tobe jointed with cement solvent )a) Working pressure 6 kg/sq.cm.(i) 75mm. diameter(MJP DSR 23-24 Sr.No.1 (a & b ) (ii & iii) P.No.74 ) 7 ii) 90mm. diameter 8 Item No.7: Providing and supplying ISI mark PVC specials etc.complete as directed by Engineer in charge Add.1% for specials of Item No.6 9 Item No.8:- Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia. including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.complete. (Reflux Valves as per IS 5312 Part (1984) without bypass arrangement PN-1i) 80mm. diameter (MJP DSR 23-24 Sr.No.1 P.No.144 ) 10 Item No.9: Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store,unloading, stacking excluding GST levied by GOI & GOM in all respect etc complete.a) 65mm. diameter.(MJP DSR 23-24 Sr.No.2 (ii & ii) P.No.145) 11 b) 80mm. diameter 12 Item No.10: Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent Joint/ ring fit joint) a) Working pressure 6 kg/ sq.cm.i) 75mm. diameter(MJP DSR 23-24 Sr.No.4 (a & b) (ii & iii) P.No.78 ) 13 (ii) 90mm. diameter 14 Item No.11: Lowering, laying and jointing in position following C.I. D/F Reflex valves, Butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete (Rate for all class of valves )(i) 65mm. diameter(MJP DSR 23-24 Sr.No.4 (ii & iii) P.No.148) 15 (ii) 80mm. diameter 16 Item No.12: Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excvation in all types of strata and fixing in murum packing etc. complete.(a) 225 mm x 300 mm. (40 kg)For 80mm. dia. S.V.(MJP DSR 23-24 Sr.No.5 P.No.285 ) 17 Item No.13: Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15cm. layers with all leads and lifts including consolidation, surcharging etc. complete. (MJP DSR 23-24 Sr.No.15 P.No.40 ) 18 Sub work : Pumping Machinery Proposed Percolation WellItem No.1: Providing erecting giving test of submersible pump sets conforming to IS 8034 and motor conforming to IS 9283, with water proof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V+-10%, 3ph, 50 Hz A.C. supply, with cable guard, thrust carbon / fiber bearing to with stand entire hydraulic thrust. The pump set shall suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufactures design. Antithrust stream lined non return valve shall be provided with the pump. 3m. submersible copper conductor cable in single / double run and 2 pair of suitable size erection clamp 10mm. thick shall be provided with each pump.i) Submersible pump 150mm. dia. (with Bronze/ stainless steel (CF8M Impeller) upto 15(MJP E & M DSR 23-24 Section & Code No. PM I-2-14 P.No.2) 19 Item No.2:-Providing and supplying in standard lengths Polyethelene pipes, confirming to IS 4984/ 14151/ 12786 / 13488 with necessary jointing material like chanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler / specials, incuding transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays and rains- excluding GST levied by GI & GOM in all respect etc complete.A) PE-100,6kg/sq.cm.75mm. diameter (MJP DSR 23-24 Sr.No.1 (iii), P.No.123 20 Item No.3: Lowering, laying and jointing H.D.P.E./M.D.P.F. pipes in proper position incuding all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS code complete with all materials for jointing procedure like Electrofusion machine. Electric heater / butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer in charge as per IS-763475mm. diameter(MJP DSR 23-24 Sr.No.1 (iii) P.No.125 ) 21 Item No.4:- Supplying, erecting, testing and commissioning of automatic control panel for three phase,415V, A.C. supply submersible / centrifugal pump set for 7.5 HP to 10 HP consisting of D.O.L. starter having relay range 13-21 A, S.P.P. combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated vibratio proof enclosure with IP54 protection with single phasing, phase reversal phase imbalance etc. completeAutomatic control panel(PWD E & M DSR 23-24 I.No.12-4-18 P.No.176 ) 22 Item No.5:- Supplying erecting flat flexible 3 core 4 sq.mm. PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column assembaly complete.(PWD E & M DSR 23-24 I. Code CB 12-4-9 P.No.175)
