Supply Of Different Machineries , Supply Of Different Machineries. , Automatic Knife Sharpening Paper Cutting Blade Grinding Machinemachine Size: --Grinding Length 1600 To 1800Mm, Grinding Width 150/160Mm.Width Of The Machine Table 200 Plus Mm, Grinding Motor 4To6kw, Cast Iron/Welded Modular Construction, Smooth/Ss Inner Area To Drain Out The Cooling Water Drainage, Hardened And Ground Steel Bands For Main & Side Guides, Easily Exchangeable, Cast Iron Table With T Slots & Clamps, Cast Iron Swiveling Table For Bevel Grinding In One Setting Swiveling 360 Degrees. Additional Clamping Sides With T Slots & Clamps, *Grinding Heads Should Be Smooth To Move On Carriage Ways Of The Bed, Branded Grinding Motor Should Be Used Like Siemens/Abb/Kirloskar Etc.,Mounted With Electro Coolant Pump, Accessories Required.:A) Herded Grounded Strip. One Set., B) Grinding Stone., C) Honing Stones. D). Stone Desser.,E). Spl. Tools In Any , 43? Fully Automatic Heavy Duty Hydraulic Paper Cutting Machine-- Front Table Length 680 Mm.,Front Table Height 900 Mm., Minimum (Hydraulic) Clamp Pressure 400 Kg. ,Max. (Hydraulic) Clamp Pressure 4000 Kg., Smallest Cut Without False Clamp 25 Mm., Smallest Cut With False Clamp 25 Mm., Cutting Width 1070 Mm., Clamp Opening 130 Mm., Weight Of The Machine 2800 Kg Or Above., Back Gauge Speed (Normal) 50 Mm. Per Second., Back Gauge Speed (Exp) 200 Mm. Per Second Or Above., Operative Power Supply 350-500V3 Phase., Max Power Within 4.5 Kw.,Machine Height Within 1700 Mm., Operative Temperature 10 To 55° Degree. , Hydraulic Valve And Clutch, Operative Brake System. , Multi-Layer Photo Electric Safety., Double Stroke Prevention/Two Hand Cutting Cycle Switch., Mechanical Overload Prevention., Air Table With 8.8 Coating. ,The Machine Should Be Supply With Future Provision To Incorporate Programming System Od Bear Minimum Expenses. , Back Gauge Positional Accuracy 0.03 Mm., Servo Motor Driver Back Gauge Mechanism., Bhartiya Cutter Hammer Makes Control Gear. , Perfect Binder Machine ----4Four) Clamp, Production Speed 2500 Per Hour., Book Block Size, Book Width 100 To 270 Mm.,Book Length 150Mm To 440 Mm.,Book Thickness 3 Mm. To 50 Mm., Dimension And Weight , Length X Width X Height – 3200 Mm X 1400 Mm X 1220 Mm,Weight - 2700 Kg Approx., Power Supply –415 V, 50 Hz 3 Phase. , Damper Roller Washing Machine----Machine Size: 30’’ Width, 70’’ Length,36’’ Height, Machine Operation:, Forward/Reverse Switch, Max Roller Replacement: 4(Four), Max Roller Size :60’’, Roller Wash Tray: Stainless Steel With M.S Fabrication , P.S Plate Processor- Dimension (L X W X H)-1170 X 1260 X 860 Mm, Plate Size- 700 X 970Mm, Developer Tank Capacity-40 Liters., Electric Voltage-220 Volt., Speed-300-600Mm / Min. Automatic Double Side Flip Top Palte Exposure- Exposing Area -960 X 1200 Mm, Power Supply -220 V Single Phase, Exposure Uniformity-85-95%, Light Source Should Be From Bottom Of The Exposure Machine, Metal Halide Lamp With 3Kw Capacity With Instant Start, Arrangement For Exposing From Both Sides.
