|
| 1 | Almirah Steel med (FD 67/1032)S & F following components of Almirah steel medincluding dismantling unservicable one all as specified and as directed |
| 2 | Lock with duplicate keys (Make of Lock- LICO/RINA/Godrej) |
| 3 | Handle 100 mm size chromium plated |
| 4 | 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of olivegreen/smoke Grey shade of approved quality over a coat of primer as specifed and directed. |
| 5 | Supply and fix leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved qualityover a coat of primer as specified and directed. |
| 6 | Supply and fixdoor shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device withlock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of olivegreen/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.(Note for steel painting;- All steel surface shall be done with spray painting)(Make of Lock-LICO/RINA/Godrej) |
| 7 | Supply and fixshelves made of 1mm thick CRCA sheetwelded/riveted and painted with one coat of synthetic emamel paint of olivegreen/smoke Greyshade of approved qualityover a coat of primer as specified and directed. |
| 8 | S&F Cleats as directed and specified. |
| 9 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outsideincluding dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge. |
| 10 | Almirah steel large (FD-67/1031/OP)S & F following components of Almirah steel medincluding dismantling unservicable one all as specified and as directed. |
| 11 | Lockduplicate keys (Make of Lock- LICO/RINA/Godrej) |
| 12 | Handle 100 mm size chromium plated |
| 13 | 3 way locking devicewith necessary fittings and painted with one coat of synthetic enamel paint of olivegreen/smoke Grey shade of approved quality over a coat of primer. |
| 14 | Supply and fix leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of olivegreen/smoke Grey shade of approved qualityover a coat of primer as specified and directed. |
| 15 | Supply and fixdoor shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No,key hole and painting with one coat of synthetic enamel paint of olivegreen/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/RINA/Godrej) |
| 16 | Supply and fixshelves made of 1mm thick CRCA sheetwelded/riveted and painted with one coat of synthetic emamel paint of olivegreen/smoke Grey shade of approved qualityover a coat of primer as specified and directed. |
| 17 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outsideincluding dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge. |
| 18 | Locker steel (FD-1029)S & F following components of Locker steelincluding dismantling unservicable one all as specified and as directed. |
| 19 | Handle 100 mm size chromium plated |
| 20 | Hasp & staple 100mm chromium plated |
| 21 | Supply and fix leg made of 1mm thick CRCA sheetduly welded/riveted and painted with one coat of synthetic emamel paint of olivegreen/smoke Grey shade of approved qualityover a coat of primer as specifed and directed. |
| 22 | S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olivegreen/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed. |
| 23 | S & F new curtain rod SS of size 20mm dia of 0.5mm wall thickness of locker steel complete all as specified and as directed. |
| 24 | Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outsideincluding dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge. |
| 25 | Chair steel tubular with/ without arms (FD-75 M)S & F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in \"Godrej\" pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed. |
| 26 | Seat frame as specified and directed. |
| 27 | Back frame as specified and directed. |
| 28 | Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size as specified and directed. |
| 29 | MS Flatsize 25 x 25 x 4mm thick welded at corner at bottom of the seat only to supportand screwed with the seat as specifed and directed. |
| 30 | Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms including4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame as specified and directed. |
| 31 | Chair Verandah FD-256/ MAP-FD/MAP/06 |
| 32 | M&L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed. |
| 33 | Canning seat and back as specified and directed. |
| 34 | S&F PVC seat and back 4mm thick with weight not less than 1.85kg and grooves 90x100mm Make - Supreme/Ballowal/ or eqivalant brand complete as specified and directed. |
| 35 | Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality as directed. |
| 36 | PVC shoes to the each leg of approved quality as directed. |
| 37 | Table office officer/clerk steel (FD-84/1003,1004 )S & F following components of Table office/clerk steelincluding dismantling unservicable one all as specified and as directed. |
| 38 | Drawer made of 1mm CRCA sheetincluding painting with synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. |
| 39 | Leg/stiffener25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat ofprimer. |
| 40 | Lock with duplicate keys(Make of Lock- LICO/RINA/Godrej) |
| 41 | Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories andpainting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty of Table office Officer/Clerk Steel as specifed and directed. |
| 42 | Table top shall be made up of 18/19mm thick Prelaminated MDF boardon one side of approved shade including provision of 4mm thick teakwood beading all around completeof Table office Officer Steel as specified and directed. |
| 43 | Table top shall be made up of 18/19mm thick Prelaminated MDF boardon one side of approved shade including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel as specified and directed. |
| 44 | PVC shoes to the each leg of approved quality as directed. |
| 45 | Preparation of old painted steel sufaces by scraping with emary paper and welding as reqiured cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel. |
| 46 | Preparation of old painted steel sufaces by scraping with emary paper and welding as required cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel. |
| 47 | Shoe Rack steel (MAP) - |
| 48 | Supply and fixing of main frame(both side) of shoe rack steelwhich is made out with 25mm round pipe wall thickness 1.6mm as shown in drg as specified and directed. |
| 49 | Supply and fixing of 19mm dia ms pipe of 18 gauge with Jaliframe of shoe rack steelwhich is made out with 3mm thick ms rodas shown in drg as specified and directed. |
| 50 | Preparation of the old painted steel surfacesby scraping with emery paper and welding as required, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality including providing new suitable 04 Nos PVC shoes to the each leg of approved quality. |
| 51 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
