|
| 1 | Chair Dining FD-279/228S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 2 | Rear leg all as specified and as directed. |
| 3 | Front leg all as specified and as directed. |
| 4 | Rear/front/side rail all as specified and as directed. |
| 5 | Stiffener all as specified and as directed. |
| 6 | Back rest all as specified and as directed. |
| 7 | S & F recanningin \"Godrej\" pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable oneall as specified and as directed. |
| 8 | Shoe as specified and directed. |
| 9 | Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing two coats with french polish to obtain a glossy finish all as specified and directed. |
| 10 | Bed plywood top FD-246S&F new componentscomprising of following outer member made of shisham wood and internal frame made of cheer wood, covered both sides ofboard with 3.5 mm thick OST plywoodwith 12mm thick half cut teak wood beading including dismantling unservicable oneall as specified and as directed. |
| 11 | Head board all as specified and as directed. |
| 12 | Foot board all as specified and as directed. |
| 13 | S & F new teak plywoodof head board on both sidesalong with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed. |
| 14 | S & F new teak plywoodof foot board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed. |
| 15 | Long rail of size 90 x 35 mm |
| 16 | Stiffner of size 60 x 40 mm |
| 17 | Wooden bracket (corner) |
| 18 | S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screwsincluding dismantling unservicable oneall as specified and as directed.Make of Ply : Archidply/century/Greenply. |
| 19 | preparation of the surfaces by throughly rubbing with emery paperboth surfaces of the head board, foot board including legs and long rails and polishing with french polish two coats to obtain a glossy finish complete all as specified and as directed. |
| 20 | Table Dressing Gents with mirror ( FD-230) |
| 21 | S&Fnew Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable oneall as specified and as directed. |
| 22 | S & F new box made up of 18 mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alrounddismantling unserviceable oneall as specified in drg and as directed. |
| 23 | S&F Drawer made of 12mm thick commercial plywood and front side made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alroundand provision of knob including dismantling unserviceable oneall as specified and as directed. |
| 24 | Preparation of surfaces with sand/emery paper and applying french polish with one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and directed. |
| 25 | Table Dressing Ladies with mirror ( FD-251) |
| 26 | S&F Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable oneall as specified and as directed. |
| 27 | S &F Drawer made of 12mm thick commercial plywood and front side made of 18 mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround and provision of knob including dismantling unserviceable oneall as specified and as directed. |
| 28 | S &Fnew complete leg base as per drg including dismantling unserviceable one all as specified and as directed |
| 29 | S &Fnew box with twin aluminium channel fitted with glass shutter (02 nos) complete made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround as per drg including dismantling unserviceable one all as specified and as directed |
| 30 | Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 31 | Chair dining cushioned (FD/MAP-II/04)S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 32 | Rear leg |
| 33 | Front leg |
| 34 | Side/back/front rails |
| 35 | stiffener |
| 36 | Providing new 75mm Cushion with new tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office Make- Sleepwell/Featherfoam/Kurl-on.Cost of tapestry cloth shall not be less than Rs 280/-per meter |
| 37 | M&L for providing new tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one.Cost of tapestry cloth shall not be less than Rs 280/- per meter. |
| 38 | Tightening of all parts/joints of whole Chair dining cushioned with bamboo pins. |
| 39 | Shoe as specified and directed. |
| 40 | Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 41 | Table dining 4/6 persons 239/273 |
| 42 | Supply and fixing in replacement of top of table dining 6 persons ofmade of 18/19mm thick prelaminated MDF board with appropriate teak wood beading alround ot top of table dining 6 persons of size complete all as specified and directed.. |
| 43 | Supply and fixing in replacement of top of table dining 8 persons made of 18/19mm thick prelaminated MDF board with appropriate teak wood beading alround ot top of table dining 6 persons of size complete all as specified and directed.. |
| 44 | supply and fixing in replacement of legs of table dinning 6/8 persons with new legs of size 90x45x750mm made of 1st class hard wood teak/shisham,complete all as specified and directed.. |
| 45 | supply and fixing in replacement of long rails of 1st class hard wood teak/shisham, for 6 persons size and shape all as shown on drg. |
| 46 | supply and fixing in replacement of long rails of 1st class hard wood teak/shisham, for 4 persons size and shape all as shown on drg. |
| 47 | supply and fixing in replacement of short rail of table dinning 6/8 persons with new short rails of size 90x45x900mm made of 1st class hard wood teak/shisham, size and shape complete all as specified and directed. |
| 48 | supply and fixing of wooden bracket of size 100x100x35mm made of 1st class hard wood teak/shisham, size and shape complete all as specified and directed. |
| 49 | Shoe as specified and directed. |
| 50 | Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 51 | Table PegFD- 277 & 236/384S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 52 | Leg |
| 53 | Top rail (long/front) |
| 54 | Top rail (short/side) |
| 55 | Stiffener |
| 56 | Shoe as specified and directed. |
| 57 | Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable oneall as specified and as directed. |
| 58 | Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 59 | Table writingFD-249 & 275S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 60 | Leg |
| 61 | Long rail |
| 62 | Short rail |
| 63 | Side/bottom rail |
| 64 | Backmade out of 6 mm thick plywood commercial including dismantling unserviceable oneall as specified and as directed. |
| 65 | Sidemade out of 18 mm thick Pre-laminated MDF board one side laminated finish including dismantling unserviceable oneall as specified and as |
| 66 | Stiffner (long) |
| 67 | Top made out of 18 mm thick pre-laminated MDF board duly providing 4 mm thick teak wood beading all around including dismantling unserviceable one |
| 68 | Drawer made out of 18 mm thick MDF board for front and 12 mm thick for back/side including provision of knob including dismantling unserviceable oneall as specified and as directed.Note :-Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality |
| 69 | Shoe as specified and directed. |
| 70 | Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated MDF board including back provided with 6mm thick commercial plywood including dismantling unserviceable oneall as specified and as directed.Note :- (a)Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality).(b) Hinges shall be 50 mm of approved quality. |
| 71 | Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 72 | TeapoyFD-382/ 232 & 278S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 73 | Leg |
| 74 | Top rail (long/front) |
| 75 | Top rail (short/side) |
| 76 | Stiffener |
| 77 | Shoe as specified and directed. |
| 78 | Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable oneall as specified and as directed. |
| 79 | Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 80 | Chair writing FD-202/ 250/280S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 81 | Rear leg |
| 82 | Front leg |
| 83 | Rear/front/Side rail |
| 84 | Arms. |
| 85 | Back rest |
| 86 | Stiffener |
| 87 | S & F recanningseat & back of the chairand recanning in \"Godrej\" pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for bordersincluding dismantling unserviceable oneall as specified and as directed. |
| 88 | Shoe as specified and directed. |
| 89 | Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformlyand polishing two coats with french polish with french polish to obtain a glossy finish all as specified and directed. |
| 90 | Chair Easy FD-1108/229S&F new components of 1st class HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 91 | Rear leg |
| 92 | Front leg |
| 93 | Arms |
| 94 | Front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and directed |
| 95 | S&Frecanning seat & backin \"Godrej\" pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for bordersincluding dismantling unserviceable oneall as specified and as directed. |
| 96 | Shoe as specified and directed. |
| 97 | Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformlyand polishing two coats with french polish with french polish to obtain a glossy finish all as specified & directed. |
| 98 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
