Tender For Repair/ Maint, Cleaning Of Stps And Connected Items Under Aor Of Ge (S) Mamun; 1 M & L for cleaning the entire STPonce in every six month of any capacity by cleaning the bar screen chamber -01 No, Oil & Grease Trap tank -01No, Equalisation tank -01No, MBBR Reactor-I, MBBR reactor-II-2 Nos,Tube Settler tank -01No , chlorine contact tank -01No, treated water tank -01 No by means of coil / wire brushand wash the interior with bleaching powder and removing all loose / sedimented sand, sludge, mud, vegetation, grit, ash, rages, fibers and string/plastic materials etc disposed off the sludge away from the cantt area using safety protection/devices for working men power while workingincluding separatingthe serviceableMBBR media for reuse and making tank leak proofbyplastering in cement morter 1:2 mixed with suitable water proofing compound as per manufacturer,s instructurers or any other superior mixture, preventing leakage oftank complete all as specified and as directed .Note:- (i) Delay in commnecement of work, if noticed, the recovery shall be made @ Rs 1000/- per day of delayfrom contractors dues. (ii) All materials like Cement, bleaching powder, use of wire brush etc are included the quoted rates. 2 M & L for painting of MS frames, ladder, gates, Pipe line of STP installation with syntheticenamelled paint of appropriate colour including preparation of surfacecomplete all as specified and as directed . 3 Supply onlysodium hypo chloride solutionof 12.5% strengthin sealed container all as specified and directed as per makeapproved by GE 4 Supply onlyAlums crystalas per sample completeall as specified and directed. 5 Supply laying and spreading in STP, gravells/pebbles dry clean type of size required at site In sldge drying bed including cleaningall vegitation, mud etc before spreadingshall be removed and disposed off all as specified and as directed. 6 Supply and lay/spreading in STP river sand dry clean type at sitein sludge drying bed,incjuding cleaning all vegitation, Mud etc before spreadingshall be removed and disposal off as per procedure in all 05 Nos STPscomplete all as specified and as directed. 7 Supply, installation, commissioning in repairs and testing of Csxi soft starter fully automatica, suitable for 60 HP centrifugal pump set, 415 volt, 50 Hz, AC, 3 phase, Cat part No. Csxi 075V 4CI of make L&T including providing semi-conductors, suitable size contactor, thimble strips and casing etc complete all as specified and directed. 8 Disconnecting of electric connection of motor pump set up to 15 HP, taking outnon clog defective submersible pump set from sewage well, dismantalling motor pump set carefully and checkingof all other parts for its serviceability andreplacement of and including minor unserviceable components/spares like gasket packing, rubber seal, bush, nut and bolt, washer andgreasing,welding, metaling, turning, polishing, Lathe work etc. along with replacement ofmajorcomponents/spares as per manufacturers instruction andtestingafter repairingand fixingsubmersible pump set on his existing positioncomplete all as specified and as directed.Note: (i) Defective major components/spares if required to be replaced shall be measured and paidas supply only under respective item 9to 12here-in-after and labour element included in this item for replacement of major spares/components.(ii)) Delay incopmmencementy ofwork if noticed the recovery shall be made Rs 500/- per day of delay from contractor,sdues.(iii) Spare parts as required will be replaced as percat part or as per existing sampleto suitthe equipmentfor smooth functioning and shall be measured and paid separately. 9 Supply only tungsten mechanical seal motor side and pump side suitable for sewage application non clog sewage submersible pump set upto15HP complete all as specified and as directed. 10 Supply only DE/NDE Ball/ roller bearingof suitable size of 15 HP motor pump set as existing bearing rings complete all as specified and as directed . 11 Supply only O rings set suitable size for pump set of 15HPas perexistingcomplete all as specified and as directed. 12 Supply only impeller for non clog submersible sewage pump setup to 15 HP complete all as specified and as directed. 13 Disconnecting 3 phase electric connections of air blower unitupto 30 HP capacity and doing comprehensive maintenance of air blower andcheckingof and including all other parts for its serviceability and replacement of minor unserviceable components/spares like gasket packing, nut and bolt, washer, bush,and greasing,welding, metaling, turning, polishing, Lathe work etc. along with replacement ofmajorcomponents/spares as per manufactures instruction andtestingafter repairingand fixingair blowerunitas his existing positioncomplete all as specified and as directed.Note:-Defective major components/spares if required to be replaced shall be measured as supply only under respective item14 to 20 here-in-after and labour elementfor replacement of major spares/components included in this items.(ii)) Delay in commencement ofwork if noticed,the recovery shall be made @Rs 500/- per day of delayfrom contractor,s dues. (iii) All itemsbeing spare parts as under will be replaced as required as percat part or as per existing sampleto suit the equipmentfor smooth functioning. 14 Supply only rotors/ impeller of air blower upto 30 HP asper existing sample. 15 Supply only V beltof air blower upto 30 HP asper existing sample. 16 Supply only CIV pulley of air blower upto 30 HP ofas per existing sample. 17 Supply onlygears of air blower upto 30 HP as per existing sample. 18 Supply only air filter of air blower upto 30 HP as per existing sample 19 Supply onlybearing of air blower upto 30 HP suitable size as existing bearing 20 Supplyand fillingofsynthetic Gear oilISO Viscosity No. 150grade 21 Disconnecting electrical/mechanical connection from C/F pump set25 to 50 HP of any type & make and taking upfrom foundation and transporting to authorized workshop carry out repairs including replacement of minor unserviceable components/spares like O rings, Oil seal, Mechanical seal,pump gland, casing ring, shaft sleeves, gasket packing, nut and bolt, washer andgreasing,welding, metaling, turning, polishing, Lathe work etc. along with replacement ofmajorcomponents/spares as per manufactures instruction andtestingafter repairingand fixingC/F pump setas his existing positioncomplete all as specified and as directed.Note:-(i)Defective major components/spares if required to be replaced shall be measured as supply only under respective item 22 to 27 here-in-after and labour element included inthisitem for replacement of major spares/components. (ii)) Delay in commencement of work, if noticed, the recovery shall be made @ Rs 500/- per day of delay from contractors dues.(iii) Spare parts as under will be replaced as required as percat part or as per existing sampleto suit the equipmentfor smooth functioning. 22 Supply only MS pump shaft of punp set 25 to 50HPas per existing sample complete all as specified and as directed . 23 Supply only ball bearing of suitable size of pump set 25 to 50HPas existing bearing complete all as specified and as directed complete all as specified and as directed . 24 Supply onlyimpeller of pump set 25 to 50HPas per existing sample complete all as specified and as directed . 25 Supply only star/tyre rubber for coupling of pump set25 to 50HPexisting size complete all as specified and as directed . 26 Supply only CI/MS coupling with rubber tyre of Pump set 25 to 50HP of existing sizecomplete all as specified and as directed . 27 Supply only CI/ MSbearing housing of of pump set 25 to 50HP existing size complete all as specified and as directed . 28 Disconnecting electrical/mechanical connection from raw sewagewater non clogcentrifugul pump setupto 15 HP capacity of any type & make and doing comprehensive maintenance, transporting to authorized workshop carry out repairs including replacement of minor unserviceable components/spares like O rings, Oil seal, Mechanical seal,pump gland, casing ring, shaft sleeves,NRV, gasket packing,nut and bolt, washer andgreasing,welding, metaling, turning, polishing, Lathe work etc. along with replacement ofmajorcomponents/spares as per manufactures instruction andtestingafter repairingand fixingC/F pump setas his existing position complete all as specified. Note:- (i) Defective major components/spares if required to be replaced shall be measured as supply only under respective item 29 to 33here-in-after and labour element for replacement of major spares/components included in thisitem. (ii)) Delay in commencement of work, if noticed, the recovery shall be made @Rs 500/- per day from contractors dues .(iii) Spare parts as under will be replaced as required as percat part or as per existing sampleto suitthe equipmentfor smooth functioning. 29 Supply only MS pump shaft of pump upto 15 HP as per existing sample. 30 Supply only ball bearing of suitable size of pump upto 15 HP as existing bearing complete all as specified and as directed . 31 Supply onlyimpeller of pump upto 15 HP as per existing sample 32 Supply only star/tyre rubber for coupling of pump upto 15 HP of existing size 33 Supply only CI/ MSbearing housing of pump upto 15 HP of existing size 34 M&L for servicing of Tube settler scrapper (clarisettler) motor, gearbox and any other parts for its serviceabilityandincluding replacement ofunserviceable components/spares like chain, pully, nut and bolt, gear rod, washer, spring and greasing,welding, lathe work, including rewindingof motor etc. if any other requirement at site as per manufactures instruction along with fixing andtestingafter repairing/ servicing of complete all as specified. 35 M&L for dismantling and taking down incl disconnectiong of Iron fins from tube shettler well and removal of moving mechanism gearbox and other available parts and refixing the same after doing the needful repaircomplete all as specified and as directed . 36 M & L for disconnecting and taking down carefullyofburn out motor any makeand type existing3 phase electric motorupto 20 HPforrewindingincluding rewindingthe motorwith new super enameled copper winding wire of same gauge as per existing, impregnated paper, sleeves, lathorised fiber glass, varnish and tape, etcalongwith re-installation of motor in original position, fixing and checking connections and testing at site complete all as specified and as directe. 37 All as above item No 36 here in before but for electric motor capacity from 25 HP to 50 HP 38 All as per description ofitem No 36 here in beforebut fornon clog raw sewage watersubmersible pump set upto 15 HP 39 M&L for disconnecting electric connections from chemical dosing pump carefully of any make and typefor repairs and thorough inspection by Engineer-in-Charge including replacement of unserviceable parts, rewinding of motor and reinstalling same at existing locationafter repair and testing complete all as specified and directed.(Note- Cost of Spares parts, accessories and transportation shall be included in this item rate.)Note : Once it repair by contractor it is theresposiblity ofcontractor forrunningserviceable condition till the completion of contrct. If the dosing pump found in unserviceable condition Rs 500..00per day shall be recovered from contractor,s dues as penality complete all as specified and as directed. 40 Removing old unsvflat coppermulti stranded3 core cable from electric motor /panel, supply and fixing submersible flat copper cable multi stranded 3 core of size 10 sqmmcomplete including connecting andtestingcomplete all as specified and as directed. 41 S&F in repairs MCCB 3 Pole, 415 Volt, 63-100 Amps Thermal - Magnetic Release adjustable type with breaking capacity 25 KA as per existing sample in Motor LT panel board complete all as specified and as directed. 42 S & F in repairsMCCB 4 Pole, 415 Volt, 125-160 Amps adjustable type, with breaking capacity 35/36 KA as per existing sample in Motor LT panel board complete all as specified and as directed. 43 S & F in repairs motor protection circuit breaker (MPCB), 415 Volts, 3-ph, 50 Hz, 10 - 30 Amp rating as per existing samplecomplete all as specified and as directed. 44 S & F in repairs volt meter 3 phase suitable size to existing one complete including connection & testingcomplete all as specified and as directed. 45 S & F in repairs Ammeter 3 phase withincl suitable rating CTto existing onecomplete all as specified and as directed. 46 S & F in repairs indication lamps LED type with showing red, yellow and green colours suitable for 240 Volts AC supply including connection & testing complete all as specified and as directed. 47 S & F in repairsAmmeter/voltmeter Selector Switchesas per existing sample complete all as specified and as directed . 48 S & F in repairs ON/OFF, Start/ Stop push button sutaible size, colour including connection & testingas per existing sample. 49 S & F in repairsMCB SP 06-32 Amps , 240 volts with breaking capacity 10 KA. 50 S & F in repairs Bimetal Relay12.5-20 Ampsfor 3 phase motor starter complete as per existing sample. 51 S & F in repairs thermal overload relay for 3 phase motor starter complete as per existing sample. 52 S & F in repairs Voltage Monitoring Relaysuitable forupto 50 HP motor startercomplete all as specified and as directed. 53 S & F in repairs 3 pole contactor upto 30 Amps, 415 Vor as per existing sample with testingcomplete all as specified and as directed. 54 S & F in repairs 3 pole contactor 40-70 Amps, 415 V or as per existing sample with testingcomplete all as specified and as directed. 55 S & F in repairs single phase preventer of any type with new single phase preventer suitable toexisting sample for fully automatic motor starter complete all as directed. 56 S & F in repairs front mounting add on Aux. contact block 2 NO + 2 NC type or as per existing sample with testing completeall as directed . 57 Supplyand filling MBBR mediain MBBR Tank for digesting sludge in STP plant complete all as specified and as directed. 58 M&L for maintaining and enhancing the bacterial growth in Bhaskar/Bana/ Basanter, Chainsing & KhetrapalSTPsMBBR reactor-I, MBBR reactor- II, by dissolving the growth element like raw cow dung, Jaggery, urea or other suitable organic adhesiveto maintain and treated sewage water as per CPCB/SPCBlatest parameters fromNABL or Punjabpoution control boardapprovedlaboratery complete all as specified and as directed.Note:-If contractor repeatedlyfail to maintain STP treated water as per CPCB/PPCB parametershe shall bepaid penaltywhich ever raising from punjab polution control board/MES dept. No claim whatsoever shall be entertained on this account. 59 Supply and filling Bio culture bacteria liquid forMoving bed aerobic bio reactor chamber for topping up and maintaininglive position of Bacteria for digesting sludge in STP plant, complete all as specified and as directed. 60 S & F in repairs LED security light 45 Wattsfitting with pressure die cast aluminum housing,heat resistant toughened glass, IP 66 protection including connectioncomplete all as specified and as directed. 61 M & L for preparationof old painted surfaces of steel tubularpole of 9 /8.5 mtr strut pole (LT) including cableprotectionpipe, clamps, GI pipebracket etc. and applying one coat ofaluminum painton all the metallic surfaces all as specified & directed including numbering of Poles with syntheticenameled painted letterof shape & size as directed. 62 S & F in repairs cast iron butterfly valve (wafer type) 50-65 mm bore diaincluding jointing material such as rubber gaskets, bolts, nuts & washers ofsuitable to existing size and model all as specifed and directed. 63 S & F in repairs cast iron butterfly valve (wafer type) 80-100 mm bore diaincluding jointing material such as rubber gaskets, bolts, nuts & washers ofsuitableto existing size and model all as specifed and directed. 64 S & F in repairs cast iron butterfly valve (wafer type) 125-150 mm bore diaincluding jointing material such as rubber gaskets, bolts, nuts & washers ofsuitableto existing size and model all as specifed and directed. 65 S & F in repairs Air Pressure gaugesuitablerating to existing size complete all as directed. 66 S & F in repairs of water Pressure gauge0-60 PSI rating suitable to existing size complete all as directed. 67 M & L for openingdual media filter and activated carbon filter and removing blockage of filter by mean cleaning /washing the existing pebbles/carbon &change unusable pebbles/carbon with new one and re-assembling and testingthe same complete entire satisfaction of Engr-in-chargeof thefollowing size pebbles/carbon :-Note :- (i) Defectiveunusable pebbles/carbon if required to be replaced shall be measured as supply onlyunder respective item 68 to 70here-in-after and labour element for replacement shall be deemed included inthisitem.(ii)Delay in commencement of work, if noticed, the recovery shall be made@ Rs 1000/- per day from contractors dues. 68 Supply only of pebbles 02-06 mm size 69 Supply only ofactivated carbon. 70 Supply only of quartzsand 71 S & F in repairs dual media filter (FRP) type with all its internal piping,connected items and multiport size 900mm dia x1800mm height including with the activated carbon filter(FRP) of size 900mm dia x 1800mm height suitable for 300KLD STP, all as per OEMcomplete all as specified and as directed. 72 S & F in repairs dual media filter(FRP) type with all its internal piping,connected items and multiport size 900mm dia x 1800mm height including with the activated carbon filter(FRP) of size 900mm dia x 1800mm height suitable for 100KLD STP,complete all as specified and as directed. 73 Supply laying and jointingReinforced concrete pipes, class NP3 Bore of pipe 600mm, laid and jointed complete with collars incl taking out of unsv/broken pipe by any means , complete all as specified and as directed. 74 Supply laying and jointing LT 1100 voltscable fromLT Panel /duct/ ground)1.1 KV grade, of size16 Sqmm4 core aluminum conductor, screened, XLPE insulated, armoured shielded and PVC sheathed complete all as specified anddirected. 75 S & F in repairs oldLT 1100 voltscable fromLT Panel /duct/ ground)1.1 KV grade, of size10 Sqmm2 core aluminum conductor, screened, XLPE insulated, armored shielded and PVC sheathed complete all as specified anddirected. 76 S & F in repairs LT 1100 voltscable fromLT Panel /duct/ ground)1.1 KV grade, of size6 Sqmm2 core aluminum conductor, screened, XLPE insulated, armored shielded and PVC sheathed complete all as specified anddirected. 77 Excavation in any type of soiltrenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr.In depth, for taking out/laying ofXLPE Under ground cableand getting outsoil by usingMachinery /manually as per site requirement complete all as specified and as directed. 78 Returning, filling in including spreading, leveling watering and well ramming in layersin any type ofsoil complete all as specified and as directed. 79 Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed. 80 Supply & lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note:- Only punned thickness shall be measured and paid.) 81 Supply & laying bricks old size sub class B made of burnt clay best quality locally available with permissible tolerance, laidstraight abutting eack otherfor protection of cable all as specified and directed. 82 Demolition of concrete any description and in any positionor in any situation all as specified and directed 83 Material & labour for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in copping including necessary for work or in any other situation work all as specified and directed. 84 M&L in repairs for MS frame work of any type and size made of MS angle iron, channel, girders,rolled bar,Iron Tanks andflat iron etc quality confirming to Fe-410-Wor Gde-E 250 quality -A, fabricatedfrom structural steel sections including nuts, bolts, washers, welding, bending cold or hot, polishing , drilling holes for bolts, in any shape or size as required at site or directed and inclusive of one primer coat, one under coat and one finishing coat of paint etc. complete all as specified and directed. 85 Repair/replacement of 5 HP motor starter consist of contactor,relay On/off switch SPP auto/manual mode, terminal plate and volt and Amp meter complete all as specified and directed. Note :Rate of parts included the quoted rates. 86 M&L for collection of sewage treated water from 05 No. of STPs and sent to NABL or Punjabpollution control boardapprovedlaborateryfortesting once in every 3 month and the test reports are deposited at AGE E/M completeto the entire satisfaction of Engr-in-Charge. Note:-If contractor has failed for testing and submitting the reports at AGE E/M office,he shall liable to paypenalty of Rs 1000/- per day to department or which ever raised by Punjab polution control board/MES dept. 87 M & Lfor servicing of power back up system for OCEMS installed at STP under AOR of GE(S) Mamun compraising checking and replacement of battery of size 12 volt 5 AH capacity , Push button, internal power terminals, electric cable, plug sockets etc all as directed and specified. 88 M & L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of earth plate not less than 1.5 meters below ground level connected by25×4mm as earthing leadby means of nuts and bolt,thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) in PCC 1:3:6 type C-1 using 20 mm graded stone aggregate with fairfinish internal surface with 15 mm thick plaster in CM 1:4,funnel, including charcoal dust and common salt and specified including provision of 4mm dia GI wire upto 7.5 metre long protected by 15 mm bore light grade pipe and watering pipe shall be 20 mm bore medium grade ,including all excavation and earth work and connecting the earthing to an earthing test point andto mainswitch board as specified and testing on completion, all as shown in electrical plate No 3 of MES SSR Part -1 (2009), all as specified and directed.Note :- RCC pit cover shall be precast of RCC (1:2:4) type B1, 80 mm thick reinforced with XPM weighting not less than 4 kg/Sqm in lieu of CI cover. 89 M& L for Construction of brick masonary valve pit of size 90cm x 90cm x 105 cm (internal dimensions) built in cement mortar 1:6,Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix),type B-1,(using 20 mm graded crushed stone aggregates) as in coping 50mm complete including 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40mmx40mmx6 mm with 15 cm same angle four sidesfor grouting in PCC for cover and earth work in any type of soil including removal to a distance not exceeding 50 mtr and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 90 S & F in repairs aluminium strip 32×6 mm buried in ground/ fixed on walls/Ceiling by using suitable size ofsaddles etc incl taking down old one all as specified and directed 91 S & F in repairs load changeover switch 4 pole, 415 volts, 100/125 Amps in as per sampleall as specified and directed 92 S & F in repairson load changeover switch 4 pole, 415 volts, 160/200 Amps in as per sampleall as specified and directed 93 Supply, installation, and testing of Star delta motor startor fully autometic in sheet metal enclouser type AC-3 phase, 415 volt , 50HZ , having inbuilt protection and metering features, rellay MN-5, white bank contractor MN-4W suitable for 25/30 HP electric motor, with relay range 30-75 Amp complete all as specified and directed. 94 M & Lfor servicing of Online Continuous Effluent Monitoring System (OCEMS) for Online water Quality monitoring Analyzer microprocessor based System with connected accessories (electronic parts, disk, data cables, Water sample motor including Internet Data Recharge, Visiting charge of company Rep for complete system installed at STP including parts thereof keep the system servicable throughout the contract period. 95 Taking outGI Pipe 15/20mm bore with all fittings and accessories etc, from trenches/ surface and removing blockage and damaged pipe complete including cleaning the serviceable pipe for re-fixing all as specified and as directed. (Excavation/earth work shall be measured and paid for separately). 96 All as per description of item No 95 here in before but 25mm GI bore pipes.. 97 All as per description of item No 95 here in before but 40mm GI bore pipes. 98 All as per description of srlitem No 95 here in before but 50mm GI bore pipes. 99 All as per description of srlitem No 95 here in before but 80mm GI bore pipes. 100 All as per description of srlitem No 95 here in before but 100mm GI bore pipes. 101 Laying only old serviceable GI pipes 15/20mm bore,obtained from No.95 here-in- beforein new or old position in any length, laid in trenches/surfacecomplete all as specified and as directed . 102 All as per description of srlitem No 101 here in before but 25mm bore retrieved from item No 96 here in before. 103 All as per description of srlitem No 101 here in before but 40mm bore retrieved from item No 97 here in before. 104 All as per description of srlitem No 101 here in before but 50mm bore retrieved from item No 98 here in before. 105 All as per description of srlitem No 101 here in before but 80mm bore retrieved from item No 99 here in before. 106 M&L for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including welding and bending angles as necessary, riveting, etc. confirming toFe 290 Gde E-165, including dismantling of existing complete all as specified and directed. 107 M & L for 15 mm bore medium grade galvanised iron pipes with all fittingscomplete to walls and ceilings or laid in floors /trenches all as specified & directed. 108 All as per description of srlitem No106 here-in-before but 20mm bore pipes. 109 All as per description of srlitem No106 here-in-before but 25mm bore pipes. 110 All as per description of srlitem No107 here-in-before but 40mm bore pipes. 111 All as per description of srl item No 107 here-in-before but 50mm bore pipes 112 All as per description of srl item No 107 here-in-before but 80mm bore pipes.. 113 All as per description of srl item No 107 here-in-before but 100mm bore pipes. 114 Supply and fixing in repairs cast iron flanged ends sluice valve suitable for 80 mm dia pipes conforming to IS - Class PN - 1.6 with MS nuts, bolts, washers etc,including taking out/ dismantling old unserviceable one and testing complete all as specified and as directed. 115 All as per description of srlitem No 113 here in before butsuitable for 100 mm bore pipe 116 M&L for biological and chemical analysis of water (sample collected from borewell water), got carried out from Director of Health Services, Envoiremental and pollution Control Wing, Pathankot, sample carried in sterlised bottle / water cane issued by the Deptt, including transportation and analysis charge paid to the Deptt complete all as specified and directed. Note:- The rate quoted shall include the cost of sterlised bottle, if any, transportation charges. The charges paid for analysis to the Deptt shall also be borne by the Contractor.
